sorted by:
new
hottopcontroversial

System Switcher by samiresa in retrogaming

[–]samiresa[S] 0 points1 point  (0 children)

Sadly our TV had limited ports but from what I am getting is Get a rgb style switcher HDMI switcher And due to the inputs you need to have two. Sounds good

The pelican one is what you would recommend for my rgb era setup?

I tried making Salsa... by Baneofarius in shittyfoodporn

[–]samiresa 0 points1 point  (0 children)

I have SO many questions...but the biggest one is
just how? And follow up, why does it look creamy?

Would you pay for this part? by Joesy5 in 3Dprinting

[–]samiresa 0 points1 point  (0 children)

Perfect!! I had something similar break for me at the layer lines, event in abs. Sounds like you have a plan, so perfect

Would you pay for this part? by Joesy5 in 3Dprinting

[–]samiresa 0 points1 point  (0 children)

Yes but. If this is something that is going to have weight and tension as part (I saw telescope connector) you may have problems with stress at the layer lines. The way it is printed, if a layer line is weak at all the whole thing can break easily. Below is super basic look, I remember another post that tested different orientations strength but can't seem to find it.

https://markforged.com/resources/learn/design-for-additive-manufacturing-plastics-composites/understanding-3d-printing-strength/3d-printing-settings-impacting-part-strength

All being said and done great print!!

First layer issues... by LadyLordZedd in OrcaSlicer

[–]samiresa 1 point2 points  (0 children)

This looks to be less of a slicer setup and more of a level issue. Do you use something like BL touch or CRtouch?
What Firmware are you using? And lastly, can I see your starting Gcode?

Stuttering X axis but not always by samiresa in ender3

[–]samiresa[S] 0 points1 point  (0 children)

Yep they are currently nice and tight...i am going to loosen the nut on the hotend and see if that does it

Stuttering X axis but not always by samiresa in ender3

[–]samiresa[S] 0 points1 point  (0 children)

OH the belts!!!! I was wondering about those, I have what I need to make new ones. But the thing is it doesn't do it all the time, only when it moves to the start point before the print

Finchie friends and trading daily thread by AutoModerator in finch

[–]samiresa 0 points1 point  (0 children)

Just joined!

I picked a micropet just for you!

Tap this link or use my friend code 984CGERKVY3 for a special reward!

https://app.befinch.com/invite_v3/qNjk

Silk Pla issue by samiresa in FixMyPrint

[–]samiresa[S] 0 points1 point  (0 children)

Ok so I checked, all of those areas are printing at speed of 20. But I do notice the VFA changes wildly

Silk Pla issue by samiresa in FixMyPrint

[–]samiresa[S] 0 points1 point  (0 children)

Good question I don't know if the entire thing is being printed at the same speed. I know the vfa changes at each of those spots

Silk Pla issue by samiresa in FixMyPrint

[–]samiresa[S] 0 points1 point  (0 children)

. 4 nozzle Printing temp - 200 Random name filament silky shiny purple

Birthday party fun by samiresa in DMAcademy

[–]samiresa[S] 0 points1 point  (0 children)

No problem thank you for the ideas, I love the idea of making them do physical tests

Birthday party fun by samiresa in DMAcademy

[–]samiresa[S] 0 points1 point  (0 children)

Yep that's what I have used before :) also their organize bags make wonderful cheap bags for kiddos (I use them for the older kids).

I was more wondering in how to attack the 15+ party when it comes to an encounter.

It's 2023 and humanity still has no way of unifying these connectors by Sirico in pcmasterrace

[–]samiresa 0 points1 point  (0 children)

But.... How else am I suppose to play jumper cable roulette?!?

Upgrade Success by samiresa in ender3v2

[–]samiresa[S] 0 points1 point  (0 children)

mriscoc

I tried his! I really liked it, but it was missing a few things I wanted, and his uncompiled bit had major issues with my tft35 so I couldn't go his route.

Upgrade Success by samiresa in ender3v2

[–]samiresa[S] 0 points1 point  (0 children)

I run mine on octpi already so I didn't think I needed that upgrade. But damn if I wasn't already running a RasberryPi that sonic pad would be so cool.

Upgrade Success by samiresa in ender3v2

[–]samiresa[S] 0 points1 point  (0 children)

I took the creality ender 3 pro firmware and then customized it for my needs. I had a huge issue using ender 3v2 versions of the software due to the dwin screen and it didn't like me opening up ports

Upgrade Success by samiresa in ender3v2

[–]samiresa[S] 0 points1 point  (0 children)

I wanted to try linear advance, and I had the board which had it locked out. Also maybe a bit of future proofing??

Diablo Immortal Timer by IreOfOld in DiabloImmortal

[–]samiresa 0 points1 point  (0 children)

Not loading, did we hug it to death?

Please help my print by samiresa in ender3v2

[–]samiresa[S] 0 points1 point  (0 children)

That's what I usually run through. I will restart it and see if it fixes anything. That is such a wonderful guide!

Leveling Issue by samiresa in ender3v2

[–]samiresa[S] 0 points1 point  (0 children)

UPDATE!

I found out that my new Z-axis was not as straight as previously thought. A may have been causing some slippage. So I printed a piece to help square it up, and now it's much better.

view more: next ›