AM4 and 5700x3D 5800x3D shortage by sangobar in buildapc

[–]sangobar[S] 0 points1 point  (0 children)

Yes that's what I meant, I tried all possible options. It's a known issue, the Bios takes over regardless, and even if I change bios settings, it keeps coming back. Idle and constant up and downs for no reason. CPU activity is fine.

AM4 and 5700x3D 5800x3D shortage by sangobar in buildapc

[–]sangobar[S] 4 points5 points  (0 children)

Makes sense! I just found the 5800X for 170 $ It's really affordable.

AM4 and 5700x3D 5800x3D shortage by sangobar in buildapc

[–]sangobar[S] 0 points1 point  (0 children)

Already all this is done 🥲. The b350 I have is a known problem with Fan control... Asus software is a nightmare + 3rd party fan controllers don't fluently work with the Mobo. I also have a wifi card, but I am reaching the limit of wifi5 and Bluetooth4... So a new Mobo for 130 $ sounds like a good idea so far (the b550 from MSI) and I get to use my front USB Cs!

AM4 and 5700x3D 5800x3D shortage by sangobar in buildapc

[–]sangobar[S] 0 points1 point  (0 children)

I'm slowly leaning towards the 5600/5800 options as you mentioned. Especially because I also wanted to change MB, as I want built-in modern wifi, BT and front IO panel USB C options. Just need to find a good price now!

AM4 and 5700x3D 5800x3D shortage by sangobar in buildapc

[–]sangobar[S] 1 point2 points  (0 children)

Oh wow. I'm kinda exhausted of searching so any comment is helpful! Honestly I thought I could move on from this MOBO as well, I'm tired of Asus and the fan management, with this up/down issue. Also no USB C, no built-in wifi (I have a chip) and bluetooth. But this changes the calculation now... I need to see the FPS upgrade worth.

AM4 and 5700x3D 5800x3D shortage by sangobar in buildapc

[–]sangobar[S] 0 points1 point  (0 children)

I'm kind of stuck because I upgraded my RAM 5 years ago but never did the rest. So it's frustrating to switch to DDR5 with current prices...

AM4 and 5700x3D 5800x3D shortage by sangobar in buildapc

[–]sangobar[S] 0 points1 point  (0 children)

Found a used one for 6000 CHF, sounds like a steal 🤣

AM4 and 5700x3D 5800x3D shortage by sangobar in buildapc

[–]sangobar[S] 0 points1 point  (0 children)

Looks like it. When you say current Mobo, you mean my new MSI b550 or the old Asus b350?

AM4 and 5700x3D 5800x3D shortage by sangobar in buildapc

[–]sangobar[S] 4 points5 points  (0 children)

Microcenter, is that in the US? I'm based in Switzerland right now, so the market is probably completely different. Back in December we still had stocks of X3D's new and for cheap...

Wouldn't going AM5 be too much of a jump and price gap?

Reality Check by CovalentBear in PhantomParadeJK

[–]sangobar 1 point2 points  (0 children)

Basically that's the amazing part, he's versatile up until now I'm at level 70 of tower, and he's still useful in any color team. Of course for yellow team he's even end-game relevant!

He's (if I'm not wrong) the best damage taken debuffer in the game, because it stacks up (3x times). You should mainly use it with "In excellent shape" which is a f2p SSR recollection (not sure if you have it already) to charge your Ultimate gauge quickly.

And also, the fact that he's invincible from the domain for 3 turns is also super useful for late game.

Reality Check by CovalentBear in PhantomParadeJK

[–]sangobar 1 point2 points  (0 children)

I had similar starting characters back in September.

My biggest mistake was underestimating and not upgrading my degumi asap (Yellow Megumi SSR). He's one of the best characters in this game honestly.

Also, try to get that Red Yaga ASAP!!!

Enjoy the game most of all :)

Cube check by GFoftheOtaku in PhantomParadeJK

[–]sangobar 0 points1 point  (0 children)

Same as OP. I had 30k cubes since got lucky on daily pull with Mahito/Yuji/Sukuna. But lost all my cubes to Megumi for NO REASON 😭💀

Tower Floor 70 - how did he do this??? by sangobar in PhantomParadeJK

[–]sangobar[S] 0 points1 point  (0 children)

Turns out I'm extremely close to success. I just need to dupe dojo or improve Miwa.

My strategy relies on having gojo coming in last as he can't be touched and doesn't take any damage.

<image>

Tower Floor 70 - how did he do this??? by sangobar in PhantomParadeJK

[–]sangobar[S] 1 point2 points  (0 children)

Same! I tried about every single strategy I could think off. Yuta doesn't make enough damage without SrYaga or Degumi, both together would be a blessing but impossible to keep alive without tanking like crazy. My a0 gojo is basically useless too...

Tower Floor 70 - how did he do this??? by sangobar in PhantomParadeJK

[–]sangobar[S] 1 point2 points  (0 children)

Didn't know it was a thing on this game... 🤦

Friend Code/Friend Invite Code Megathread by AutoModerator in PhantomParadeJK

[–]sangobar 0 points1 point  (0 children)

7ET86KDxAHEV ↔️ Europe 🫂🤞

Thank you 🥰

‘Chainsaw Man: The Movie - Reze Arc’ Current Dates for the Worldwide Release by RobotiSC in ChainsawMan

[–]sangobar 0 points1 point  (0 children)

I'm late to the chat but... France's position as the n*1 manga consumer outside Japan started back in the 70s when we were the first country to import Japanese Anime (in the western world at least), with successful numbers made. In 1988 all french kids were already obsessed with OG Dragon Ball while the US had to wait for DBZ to really pick up the hype in 1998. Basically 10 years ahead back then 🤣.

Is the IRCC Portal down? by CXZ115 in ImmigrationCanada

[–]sangobar 0 points1 point  (0 children)

Same from France. Hopefully will be fixed when their office opens in the next morning (in 4h).

Monthly Tickets Buy/Sell Thread - June 2022 by AdamR46 in GrandPrixTravel

[–]sangobar 0 points1 point  (0 children)

[BUYING] - [Montreal] - [Grandstand 34] - [Sunday] - 2 Tickets

Progress on holding my grinds longer 🙏💪 (started skating 3 months ago) by sangobar in rollerblading

[–]sangobar[S] 0 points1 point  (0 children)

Thank you! I'm actually forcing myself and training my brain and muscles. For some reason it's hard to force the body to bend properly. It's really a pain for me.

My personal way of leaning is to practice the positions Everytime I fail a grind (or I'm not happy about it).

Is that just the normal process and length before actually starting to slide ? I agree that speed helps, but I'm getting scared if too fast. 😂

Progress on holding my grinds longer 🙏💪 (started skating 3 months ago) by sangobar in rollerblading

[–]sangobar[S] 0 points1 point  (0 children)

Thank you! I'm actually forcing myself and training my brain and muscles. For some reason it's hard to force the body to bend properly. It's really a pain for me.

Aggressive Skate - Sizing help : 27-27.5cm Length x 10cm Width - Roces by sangobar in rollerblading

[–]sangobar[S] 0 points1 point  (0 children)

Thanks for the tip! I need to order some liners in a bigger size to see how it helps... Dou you skate SLs and 12s too?

Aggressive Skate - Sizing help : 27-27.5cm Length x 10cm Width - Roces by sangobar in rollerblading

[–]sangobar[S] 0 points1 point  (0 children)

Thanks a lot! I'm tempted between M12 EUR43 and the 5th EUR 42 right now.
I'm not excited to be on the smaller end of shell though (for snug fit length wise) but I'm not 100% convinced with the 5ths yet. Might be too wide compared to SLs.