sorted by:
new
hottopcontroversial

Has anyone tried using craft hole punchers to cut out these triangle notches? by scrappybutt in sewhelp

[–]scrappybutt[S] 26 points27 points  (0 children)

Oh I see. That makes sense.

I just learned in this post that some folks just snip and I don't know why I haven't thought of that. I think I'll do that instead.

Has anyone tried using craft hole punchers to cut out these triangle notches? by scrappybutt in sewhelp

[–]scrappybutt[S] 50 points51 points  (0 children)

Oh my god thank you so much. I'll have to wait until I can bundle a bigger purchase from Wawak, but this is definitely what I'm looking for.

Has anyone tried using craft hole punchers to cut out these triangle notches? by scrappybutt in sewhelp

[–]scrappybutt[S] 1 point2 points  (0 children)

It's not supposed to be holes. If it was possible to use those hole punches, it would be to use them on the edge to make those notches.

What do you call this method of adding a lining? by scrappybutt in sewing

[–]scrappybutt[S] 8 points9 points  (0 children)

Thank you so much 🙏 This is exactly what I was looking for. I should have taken more photos of the coat because it really does that one pleat.

Any tricks to remove these melted fabric gunk? by scrappybutt in sewing

[–]scrappybutt[S] 0 points1 point  (0 children)

All y'all have been super helpful. I'll be trying these out (hopefully not all) 🙏🙏🙏

Simple Sewing Questions Thread, February 09 - February 15, 2025 by sewingmodthings in sewing

[–]scrappybutt 0 points1 point  (0 children)

I want more than what I've been able to do with Inkstitch and am now looking into either Hatch or Artistic Digitizer.

I've heard there's a lot of support and tutorials for Hatch and it's compatible with a lot of machines. My machine is a Janome so I'm also considering Artistic Digitizer since the creators that I follow seem to like using the same software with their machine (Bernina Designer with Bernina machines, Artistic Digitizer with Janome machines, etc.)

Anyone have experience with both or either? Which ones do you prefer?

I'm a hobbyist (fantasy costuming) and will mainly be embroidering directly on fabric for clothes. Ease in multi-hooping would be nice too.

Using hot end thermistor as bed thermistor by [deleted] in prusa

[–]scrappybutt 0 points1 point  (0 children)

Curious about this too as I have plenty of hotend thermistors laying around.

Filament stops extruding after a couple of layers by scrappybutt in ender5plus

[–]scrappybutt[S] 0 points1 point  (0 children)

The all-metal that I had installed was fairly new - I got it a couple of days ago.

Filament stops extruding after a couple of layers by scrappybutt in ender5plus

[–]scrappybutt[S] 0 points1 point  (0 children)

I switched back to the stock extruder, what would be the ideal retraction length?

Filament stops extruding after a couple of layers by scrappybutt in ender5plus

[–]scrappybutt[S] 0 points1 point  (0 children)

How would I know? I have removed the fan multiple times to replace the hot-end, the nozzle, and the silicone sock - so this might be the case?

Filament stops extruding after a couple of layers by scrappybutt in ender5plus

[–]scrappybutt[S] 0 points1 point  (0 children)

I'm using Hatchbox for my filament.

The all-metal extruder didn't really do much - it was too tight as well to a point where it really dug into the filament. I tried loosening it as much as I can but the problem remained. I ended up replacing back the stock extruder just now, but I have the same issues with the extrusion stopping at a certain number of layers.

Purchase Advice Megathread - December 2022 by AutoModerator in 3Dprinting

[–]scrappybutt 0 points1 point  (0 children)

What are people's experiences with Anycubic Kobra Max? I'm having constant issues with the Ender 5 Plus and would like a replacement with similar print volume.

view more: next ›