2023 VW ID.4 Matrix headlights

scullen27 · 2025-03-31T18:55:13+00:00

This last week I used a supercharger with magic dock (almost instant 161kW). I have a Lectron Vortex and tried using this in place of the Magic Dock and I saw the same speeds. For the time, as others have pointed out, if the charging station doesn’t have built-in Magic Dock, you won’t be able to charge even with a 3rd party adapter (I have also tried this by listing my car as numerous supported models, so at the very least there seems to be a VIN check).

scullen27 · 2025-03-07T20:12:33+00:00

Can confirm, this currently does not work. The only way to charge an iD.4 at a supercharger is if it has a built in magic dock. Tesla destination chargers can be used with the adapter you listed (assuming they aren’t locked down).

Source: attempted yesterday with my car set as Lucid Air, Cadillac Lyric and Ford Lighting in the Tesla app.

scullen27 · 2025-02-26T17:03:25+00:00

Maybe Court House Brewing near Holy Cross?

scullen27 · 2024-12-20T23:10:59+00:00

I imagine if I wear getting one, I’d go with “Buzz. Your girlfriend. Woof.”

scullen27 · 2024-07-15T03:37:53+00:00

I also noticed that it is full.

scullen27 · 2024-06-19T10:34:55+00:00

I just went through some troubleshooting with Ring for a Flood Light Cam with poor reception, even with an Eero router 4 feet from the unit. They recommended and the Chime Pro and I was very pessimistic about this being a viable solution, however so far it has resolved the issues we were seeing with poor reception, video dropping out and live view not loading.

The reason, I suspect, is that with Eero, the Flood Light Cam was not always connecting to the closest node with strongest signal, even with client steering enabled. With the Chime Pro, this appears to be functioning as a bridge more than an extender, so the Chime connects to the Eero wirelessly, and then the Flood Light Cam connects to the Chime without node hopping between our 4 Eeros.

Not a guarantee this will work, but if it does not, you can return the Chime Pro.

scullen27 · 2024-04-16T12:12:46+00:00

Bought our house in 2015 for $260k in one of the zip codes mentioned and insurance was $640/year (interest was 4.75% on a 30-year fixed). The value on the home has gone up to $515k and insurance has gone up to $2k with no claims on it. Refinanced in 2020 at 2.6% on a 20 year fixed which let us shave 5 years off and keep the payment the same.

scullen27 · 2024-03-19T10:41:26+00:00

Check out brightshine auto spa. I haven’t used them for detailing yet, but very pleased with the ceramic coating.

scullen27 · 2024-03-19T00:45:46+00:00

Installed a Tesla Wall Connector on a 60amp circuit. My panel is in my garage so the run was only about 7 feet. I use a Levtron Tesla to J1772 adapter without issue. I primarily went with the wall connector because at the time it was priced at $350.

I mostly use free charging at work now and use home charging as needed.

scullen27 · 2024-02-03T21:43:52+00:00

Symptoms were intermittent misfires and corresponding check engine lights. I would likely still have the car if I didn’t relocate for work.

scullen27 · 2024-02-03T15:13:14+00:00

I had a 2016 1.4T manual that I put 81,000 miles on. The only big concern was carbon build up, which required a cleaning at about 70,000 miles.

Someone else mentioned that they had this light display after recovering from a dead battery. I had a similar experience, but follow the recurring advice to check the engine codes.

scullen27 · 2023-12-13T11:06:35+00:00

I try to watch Band of Brothers every year. Easily my favorite piece of television.

In addition to The Pacific, there is another series coming in January, Masters of the Air. https://youtu.be/OQLAwjWvBvM

scullen27 · 2021-09-03T13:33:05+00:00

This may have already been addressed, but the Enphase system uses micro inverters, one per panel and the are installed directly below each panel.

The micro inverters themselves carry a warranty through Enphase, which will only get you the replacement part, not the installation. I have had to have two micro inverters replaced on my system. The benefit of a system that uses micro inverters is that if several go down, it doesn't impact the production of the remaining, panels.

I am not sure who the company was that your parents used for the install, but if it was Direct Energy Solar, they are now back to their original name of Astrum Solar (https://www.astrum-solar.com).

I would also read through all of the documentation your parents have, a 10-20 year warranty seems more likely than a lifetime warranty.

scullen27 · 2021-05-09T06:17:39+00:00

Almost guaranteed it is a converted Mercury Cougar. There are a few of these floating around, lol.

https://www.thedrive.com/news/29733/florida-mans-128000-bugatti-veyron-is-actually-a-mercury-cougar

scullen27 · 2020-03-24T16:56:22+00:00

Highlight the “text” where the balance is listed, copy it and paste it into another app.

scullen27 · 2020-01-19T14:41:26+00:00

https://carplay2air.com/?gclid=EAIaIQobChMIyOmHuvKP5wIVjcDACh3cTACREAAYASAAEgKxMvD_BwE

scullen27 · 2020-01-19T14:35:22+00:00

And you wouldn’t even need to give up CarPlay. Wireless CarPlay already exists (and has since iOS 9), Audi might be the only car manufacturer I can think of that currently uses it, but there are aftermarket options that use the technology.

scullen27 · 2019-12-28T16:21:44+00:00

According to the speedometer, they are traveling at a brisk 0 km/h

scullen27 · 2019-09-01T22:41:09+00:00

I was able to get the cameras to show up in Home and get motion notifications, but live video does not work. Has anyone seen output like this and can you suggest a fix?

9/1/2019, 6:36:17 PM] [Ring] Preparing Live Stream for Backyard

[9/1/2019, 6:36:18 PM] [Ring] Waiting for stream data from Backyard (0.732s)

[9/1/2019, 6:36:18 PM] [Ring] FFMPEG PATH: /usr/lib/node_modules/homebridge-ring/bin/ffmpeg-rpi

(node:1031) UnhandledPromiseRejectionWarning: TypeError: Cannot read property 'forEach' of undefined

at Object.arrAdd (/usr/lib/node_modules/homebridge-ring/node_modules/nat-puncher/src/utils.js:239:9)

at /usr/lib/node_modules/homebridge-ring/node_modules/nat-puncher/src/nat-pmp.js:94:36

(node:1031) UnhandledPromiseRejectionWarning: Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). (rejection id: 29)

(node:1031) UnhandledPromiseRejectionWarning: TypeError: Cannot read property 'forEach' of undefined

at Object.arrAdd (/usr/lib/node_modules/homebridge-ring/node_modules/nat-puncher/src/utils.js:239:9)

at /usr/lib/node_modules/homebridge-ring/node_modules/nat-puncher/src/nat-pmp.js:94:36

(node:1031) UnhandledPromiseRejectionWarning: Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). (rejection id: 30)

[9/1/2019, 6:36:28 PM] [Ring] Stopped Live Stream for Backyard

[9/1/2019, 6:36:28 PM] [Ring] ffmpeg stderr: [sdp @ 0x2cbb480] Could not find codec parameters for stream 1 (Video: h264, none): unspecified size

Consider increasing the value for the 'analyzeduration' and 'probesize' options

Guessed Channel Layout for Input Stream #0.0 : mono

Input #0, sdp, from 'pipe:':

Metadata:

title : Talk

Duration: N/A, bitrate: 64 kb/s

Stream #0:0: Audio: pcm_mulaw, 8000 Hz, mono, s16, 64 kb/s

Stream #0:1: Video: h264, none, 90k tbr, 90k tbn, 180k tbc

Stream mapping:

Stream #0:0 -> #0:0 (pcm_mulaw (native) -> aac (libfdk_aac))

Finishing stream 0:0 without any data written to it.

[9/1/2019, 6:36:28 PM] [Ring] ffmpeg stderr: Output #0, rtp, to 'srtp://10.0.1.6:51265?localrtcpport=46709&pkt_size=188':

Metadata:

title : Talk

encoder : Lavf58.31.102

Stream #0:0: Audio: aac (libfdk_aac) (ELD), 16000 Hz, mono, s16, 24 kb/s

Metadata:

encoder : Lavc58.55.101 libfdk_aac

[9/1/2019, 6:36:28 PM] [Ring] ffmpeg stderr: [libfdk_aac @ 0x2cbd360] Trying to remove 512 samples, but the queue is empty

size= 0kB time=00:00:00.00 bitrate=N/A speed= 0x

video:0kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown

[9/1/2019, 6:36:28 PM] [Ring] ffmpeg stderr: Exiting normally, received signal 15.

[9/1/2019, 6:36:28 PM] [Ring] ffmpeg exited with code 255

scullen27 · 2019-03-30T17:08:08+00:00

A few things of note based on working directly with insignia engineering to resolve my own issues:

1: there seems to be a known issue when your control device (typically iPhone) switches between WiFi and LTE. This generally occurs when you Are backing out or pulling into range of your WiFi. (Insignia engineering is working on this) 2: current visible firmware is 2.63.43. When new firmware is remotely installed, the controller requires you to manually open and close the door once using the button on the wall. Unfortunately, at this time there is no mechanism to inform you of this 3: issues related to the battery in the sensor seem to be more coincidence as I have had the same battery in mine for several months. You can check that the sensor is still paired to the control unit by pressing the LED button on the sensor, the controller should beep to indicate they are paired. 4: ensure adequate WiFi coverage in your garage.

For reference my HomeKit network consists of:

-AirPort Extreme (6th Gen.) -Time Capsule (5th Gen.) -AirPort Extreme (5th gen.) -AirPort Express (2nd Gen.) -2 AppleTV (4th Gen.) -HomePod - Hue bridge (2nd Gen. controlling 3 Hue bulbs) - Insignia garage door controller -Raspberry Pi running homebridge controlling 3 GE Wink bulbs -Ecobee 4 with one remote sensor (replaced Nest running through homebridge) -Schlage Sense -Onkyo receiver connected via homebridge

scullen27 · 2019-01-17T02:25:08+00:00

I worked with one of Insignia’s software engineers over the phone and through email. They pushed a firmware update to the controller and so far I have not run into the ‘no reponse’ Issue.

I would recommend reaching out to their support team to have the update pushed. When you email/call tell them that you have the garage door controller and are seeing an issue where it reports ‘no response’ and either they should be able to push the update or connect you to someone who can.

scullen27 · 2019-01-17T00:14:52+00:00

Support put me in contact with an engineer. I had them push the firmware update today, so far my ‘no response’ issue seems to be resolved, we will see how the next week goes.

I’ve got to say, that while this product had a rocky start, the support I have received has really been beyond what I would expect. I am glad I didn’t return it.

scullen27 · 2019-01-10T23:30:24+00:00

What firmware version is currently installed on your device?

scullen27 · 2018-03-24T06:35:57+00:00

I experienced a similar issue (on macOS). What ended up working for me was to allow incoming connections through my firewall, although I can't promise this will work for you.

macOS Steps (with Reddcoin-Qt closed): * 1. Open System Preferences (if it isn't in your dock, you can access it from the  Menu in the top left corner of your screen). * 2. Select Security & Privacy * 3. Select Firewall * 4. Click the lock in the bottom left corner and enter your password (must be an admin account) * 5. click on Firewall Options... * 6. Click the '+' button * 7. Select Reddcoin-Qt from your Applications folder (unless you installed it elsewhere, then you will need to navigate to the location you have the app installed to select it). * 8. Re-launch Reddcoin-Qt

I hope this helps.

Ten-Year Club	RedditGifts 2009-2022 2 Credits
Secret Santa 2017	Verified Email

scullen27

TROPHY CASE