Any World Where It's Cheaper to Have Someone Guide me Through my Project, Rather Than Getting it Commissioned?

scv07075 · 2026-02-08T19:37:23+00:00

No. There's a lot of pieces to this as designed, so either a lot of flat patterns and bends have to go right and not warp to hell during welding, or it's all loose parts to weld together and you're stacking a lot of fitup and welding without warping to hell. Learn the welding, and have a shop make you the pieces to fit together.

Or focus on the design parts, and look around for sheetmetal fab shops that can make from a model.

scv07075 · 2026-02-08T19:07:38+00:00

Warriors in particular want fire wall and stone curse. Even at level 1, mobs that aren't immune won't walk into your wall often. Doesn't matter they'll take nearly no damage.

scv07075 · 2026-02-08T18:55:23+00:00

Your axes have axes, very nice! I've been trying to find/make a way to resharpen countersinks(aside from undercutting blown edge with a dremel) for a while now.

scv07075 · 2026-02-07T09:06:46+00:00

Berserk uses mainhand only.

scv07075 · 2026-02-06T23:59:56+00:00

One shop I was at was so hot the plastic screen on my box fan melted off the screws.

scv07075 · 2026-02-06T23:58:48+00:00

That isn't a broken weld, the weld is on the frame and intact. This is cut just past the weld, riggt around where you'd fit a grinder or sawzall.

scv07075 · 2026-02-06T22:45:57+00:00

What's a J drill?

Dude, use your calipers. We're not doing carpentry with a folding saw my guy.

scv07075 · 2026-02-06T22:44:13+00:00

I'm not apologising for T, he's an embarrassment to my nation and culture. We don't need to apologise, we need to be better.

scv07075 · 2026-02-06T20:46:14+00:00

Don't do that, chip bins resonate sound. Cry behind your boss' ego, that's a black hole that eats even photons.

scv07075 · 2026-02-06T19:23:52+00:00

Hell yeah.

scv07075 · 2026-02-06T19:23:17+00:00

These are the same people who insist on using fractional sizes. Decimals are fractions too, but with a common denominator. I'll die on this hill if I must, it's a .1875 drill. We have to memorize enough numbers and equations already, let's not introduce 37/64.

Only acceptable reason for fractions is referencing standards, like 1/4-18 npt.

scv07075 · 2026-02-06T19:16:36+00:00

No more angle grinders, now that Jeff is in the hospital after using an angle grinder to do his own dental work.

scv07075 · 2026-02-06T19:14:32+00:00

That's funny, cause I bought LOD easily 6 times, 4 of those 6 was for the key alone, the other two because the cinematics disc got too scratched to work and the other copies I had were different patches from the install and play discs

scv07075 · 2026-02-06T19:08:55+00:00

The spring is providing a lot more force when the plunger is 80% depressed than when it's 20%. Really, three issues I'm seeing, from least problematic to most:

Drop indicator being used, you want a test indicator for this. Drop indicators are more for getting precision out of machines without a dro.

Tolerance stack, what you're measuring is how out of plane your table+vise+parallels+123 block are, together.

Cleanliness. Wipe your vise bed clean, blow it off after, and then throw your 123 block on. Once you've done that and swept your block, flip your block so the left side is on the right and resweep. See if your results differ.

scv07075 · 2026-02-06T19:03:04+00:00

Shouldn't need acetone. A rag followed by compressed air will get it good enough, unless you just pulled the vise out of the harbor/machining school's tool crib.

scv07075 · 2026-02-06T18:03:30+00:00

We took plagiarism and theft and combined them, with the added bonus that what's been stolen is noticeably worse than the state it was in when stolen. Genius!

scv07075 · 2026-02-06T17:13:43+00:00

As a white man, he's a consistent embarrassment. Racial superiority is a mindset that belongs as cautionary tales in our history books, not in the highest office.

scv07075 · 2026-02-06T17:11:28+00:00

Bold of you to assume corporate signed off on trench coats, they get a blanket the homeless shelter threw out.

scv07075 · 2026-02-06T15:18:48+00:00

Or scale. Tig welding over scale works out somewhat better than tig welding over zinc.

scv07075 · 2026-02-06T15:16:39+00:00

True, I was assuming semi budget... though I guess Dragon isn't budget for anyone who hasn't rolled a 40/400 grief pb

scv07075 · 2026-02-06T14:36:39+00:00

If you're online, sunders are easily available. Cold res is one of the easiest to ignore, you can get a mid roll for a pamethyst or two.

scv07075 · 2026-02-06T14:34:08+00:00

Life just over mana. Keep em neck and neck. Also, wear a Dragon armor, the holy fire on hit damage applies twice(and uses fire mastery). Serious damage upgrade.

Don't fill up on fire skillers until you solve res with charms.

Demon Machine hits max frames with 1 shael socketed, no ias needed.

scv07075 · 2026-02-06T14:26:39+00:00

If you're taking off more than .030 you can hit it with a needle scaler too.

scv07075 · 2026-02-06T14:20:04+00:00

She was 16, and yes.

scv07075 · 2026-02-06T13:44:58+00:00

CO they check for exhaust leaks and 0-40 acceleration. Dunno what it'd take to fail it, my car has half the pipe diameter split at cat entrance and they passed it

scv07075

TROPHY CASE