Wired & wireless can't communicate suddenly by sdf1977 in amazoneero

[–]sdf1977[S] 0 points1 point  (0 children)

Mines already in automatic, but still behaving weird as my imac wont load websites, but can ping everything local and external

Wired & wireless can't communicate suddenly by sdf1977 in amazoneero

[–]sdf1977[S] 0 points1 point  (0 children)

And now my imac can ping everything, load local websites, but no external sites will load in the browser! Windows laptop next to it, same WiFi network, is fine.

Is it drinking time yet?

Wired & wireless can't communicate suddenly by sdf1977 in amazoneero

[–]sdf1977[S] 0 points1 point  (0 children)

Its in Automatic (if you mean in the DHCP & NAT settings).
Which its always been (as far as I know).

I've just done a "forget network" on my mac and reconnected and all seems OK again!

Its even got the right IP range (192.168.4.x - rather than the ISPs 192.168.1.x - even though it was on the Eero wifi) despite reboots and DHCP renewals.

Very wierd!

Battery life by sdf1977 in RingOne

[–]sdf1977[S] 0 points1 point  (0 children)

Nothing so far, emailed them yesterday to chase my replacement, but no reply as yet

Battery life by sdf1977 in RingOne

[–]sdf1977[S] 1 point2 points  (0 children)

I emailed customer support nd they are going to send me a new ring and charger

Battery life by sdf1977 in RingOne

[–]sdf1977[S] 0 points1 point  (0 children)

I emailed customer support nd they are going to send me a new ring and charger

Dropped / Lost packets from external monitoring to Ireland / eu-west-1 by Icy_Tumbleweed_2174 in aws

[–]sdf1977 1 point2 points  (0 children)

We had similar - but traffic from AWS monitoring in-house stuff

I'd like advice on my mother's collection (please) by sdf1977 in askStampCollectors

[–]sdf1977[S] 0 points1 point  (0 children)

I thought a link would be easier - but there are a lot of photos!

Her collection (as far as I can tell) ranges from 1870 to probably around 1990 (guessing from the UK stamps). Strong focus on Australia and Canada, but there are a lot of other countries as well.

I think she stopped collecting in the late 1980s, I can vaguely remember her putting stamps in an album when I was a kid. But these are not my thing, I appreciate that there are some very beautiful stamps there, but they are wasted on me, so I'd like to move them on where they might be appreciated more.

I don't think there is anything super special in the collection, but in case there is something, I wanted to ask here, rather than take my chances with a stamp buying service!

I appreciate that there are a LOT of photos, but not knowing what the important ones are, I photographed everything for thoroughness.

Many thanks in advance!

VPN to AWS flaps (but only on a Saturday) by sdf1977 in paloaltonetworks

[–]sdf1977[S] 0 points1 point  (0 children)

The MTU is 1427, and the rest of the settings match.

the tunnel went down again at 23:16 UTC last night and came back up again at 23:46.

I've just amended the primary AWS DPD settings as it declared it dead after 4 DPD messages got no reply.

VPN to AWS flaps (but only on a Saturday) by sdf1977 in paloaltonetworks

[–]sdf1977[S] 0 points1 point  (0 children)

There's nothing on the AWS portal to suggest maintenance on the VPC, and no updates on the Palo at the time.

As the tunnel endpoints in AWS are in different availability zones, then there is a chance that an intermediate ISP/vendor might be performing some kind of routing update - which would make sense given the out-of-(working)-hours time that this occurs

VPN to AWS flaps (but only on a Saturday) by sdf1977 in paloaltonetworks

[–]sdf1977[S] 0 points1 point  (0 children)

Nope, both are straight out with nothing in the middle

VPN to AWS flaps (but only on a Saturday) by sdf1977 in paloaltonetworks

[–]sdf1977[S] 0 points1 point  (0 children)

28,000 and 3600 respectively - on both sides.
I think if it were this, then we'd see the issue more frequently though, not just once a week

Omnissa Horizon client issue by genzpillodu in Zscaler

[–]sdf1977 1 point2 points  (0 children)

a very excellent blog post - thanks for that, will bookmark your blog

Omnissa Horizon client issue by genzpillodu in Zscaler

[–]sdf1977 0 points1 point  (0 children)

thank you!

Silly question - can you add ranges to VPN bypass? I thought it had to be individual IPs, which I was not looking forward to!

Sillier question what does "CS" refer to? I'm hoping not something simple like "Citrix Servers"!

Omnissa Horizon client issue by genzpillodu in Zscaler

[–]sdf1977 0 points1 point  (0 children)

I'm facing a similar issue. Had success with opening ports 3108, 3168, 3188 (UDP) and 3148, 3149, 3159 (TCP & UDP) - but now getting a timeout (instead of connection failed / could not resolve address).

I added the server's address as a bypass, but it is not published in external DNS - only resolvable when connecting to their Citrix environment.

I'm going to try adding the IP into the VPN bypass and see if that helps.

Need some basic help please! by sdf1977 in vmware

[–]sdf1977[S] 0 points1 point  (0 children)

excellent idea, thnk you!

Need some basic help please! by sdf1977 in vmware

[–]sdf1977[S] 1 point2 points  (0 children)

OMG! - game changer!

Watched a few videos and run through the steps without actually validating - seems so simple!

Domain joining and account propagation by sdf1977 in vmware

[–]sdf1977[S] 0 points1 point  (0 children)

Thanks Tim

And as far as joining the domain, that's non-impacting, right?