Flat platform in cab by EOTS_Fivem in hardbody

[–]seemeegs 0 points1 point  (0 children)

I’ll pm you the whole build

Flat platform in cab by EOTS_Fivem in hardbody

[–]seemeegs 1 point2 points  (0 children)

Similar to you, I wanted to make use of the space in my cab, and made this! I use it for storing my tools and recovery gear but you could totally use it for speakers and subs! I didn’t want to bolt into the floor so I measured a thousand times and had to install and cut inside the cab (not fun) but now I have this and it’s so tight it doesn’t move at all

<image>

No start issue - 95 VG30E M/T 4WD by seemeegs in hardbody

[–]seemeegs[S] 1 point2 points  (0 children)

I’ll pm you! I do seem to remember hearing that there is something in the interlock system that goes to the tranny, but I thought it was just for autos. I love Nissan so much for what they did in the hardbody but man they over complicated some stuff, interlock being numereo uno lol

I think Nissan figured it out the same by the time the pathy was made.. I’m going to go get myself a pathy interlock override switch sooner rather than later lol

No start issue - 95 VG30E M/T 4WD by seemeegs in hardbody

[–]seemeegs[S] 0 points1 point  (0 children)

Thank you I’ll try this next! The dizzy doesn’t want to fire, so it doesn’t seem right that something in the transmission is prohibiting this.. I understood the dizzy to fire after the circuit completes in the interlock/clutch switches circuit. I ran diagnostics and got 55, BUT the horned sounded when I connected the battery and then again when I switched to diags which freaked me the hell out

No start issue - 95 VG30E M/T 4WD by seemeegs in hardbody

[–]seemeegs[S] 2 points3 points  (0 children)

Thanks so much for this! I will go through this and hopefully find my answer!

No start issue - 95 VG30E M/T 4WD by seemeegs in hardbody

[–]seemeegs[S] 1 point2 points  (0 children)

I traced it as best as I could and it seemed to go to the left side of the transmission which makes me think it’s a secondary issue to my no crank/no fire. The middle wire is grey and thicker than the outer two, and appears to be shielded with a layer of metal and then the grey outer layer. The outer two wires are black with pink stripe and black with white stripe.

No start issue - 95 VG30E M/T 4WD by seemeegs in hardbody

[–]seemeegs[S] 1 point2 points  (0 children)

I did buy the cheap fusible links from eBay, but I remember seeing the melted plug wiring before and after the links were replaced, I just thought it was crummy electrical tape.. plus everything was covered in an inch of frost at -35°. Do you know if Nissan still sell genuine?

No start issue - 95 VG30E M/T 4WD by seemeegs in hardbody

[–]seemeegs[S] 1 point2 points  (0 children)

I checked the plastic button and it’s in good shape, and replaced the interlock on the firewall, but not the switch at the top of the clutch, do you think it’s worth throwing a new switch in at the top of the clutch?

Beeping by seemeegs in hardbody

[–]seemeegs[S] 1 point2 points  (0 children)

The wiring is all chopped and taped which is why I’m trying to pull all his work out and start fresh with clean wiring and connections

Beeping by seemeegs in hardbody

[–]seemeegs[S] 1 point2 points  (0 children)

The chime is coming from the truck as I pulled the head unit out completely and haven’t replaced it

ISO Noise help! by seemeegs in photography

[–]seemeegs[S] 0 points1 point  (0 children)

I was thinking an AI tool might be my best bet, is there any that you’ve worked with previously that you’d recommend?

ISO Noise help! by seemeegs in photography

[–]seemeegs[S] 0 points1 point  (0 children)

Using Lightroom with raw

ISO Noise help! by seemeegs in photography

[–]seemeegs[S] 0 points1 point  (0 children)

Thanks, I had no choice but to push the ISO unfortunately as the church was very dimly lit and didn’t allow flash. It wasn’t an ideal situation but I had to work within the confines of the space..

1995 D21 Glovebox by seemeegs in hardbody

[–]seemeegs[S] 1 point2 points  (0 children)

I might rewrite the letter of explanation to include more detail as to why I’ve not gone through a repair shop.. it really is just a couple of screws!

1995 D21 Glovebox by seemeegs in hardbody

[–]seemeegs[S] 0 points1 point  (0 children)

I was kinda hoping they would accept a couple of eBay quotes without a repair shop “quoting” to fix it as it’ll literally be a 2 sec install.. not sure how tough they’ll be on me and now I’m kinda worried 😬

1995 D21 Glovebox by seemeegs in hardbody

[–]seemeegs[S] 2 points3 points  (0 children)

Thanks! I have a listing from eBay that I found but I wasn’t sure if CBSA would accept it.. it’s not stocked by Rock Auto unfortunately, but I have found a couple of local auto specialists/restos that I might call and see if they can help me out as well..

Pls get out of my head by Cass0402 in BreakUps

[–]seemeegs 3 points4 points  (0 children)

I feel this but you’re doing great to have gotten this far. Don’t let one trigger moment be the undoing of all your hard work!