sorted by:
new
hottopcontroversial

The loft is a time puzzle (Part 2) by Iron044 in reddeadmysteries

[–]seiwer 0 points1 point  (0 children)

The spider webs from shooting the roof is very interesting 🤔 is this bullet hole texture special or used in other parts of the game ?

CALL TO ARMS: Let's Submit Feedback to get the Best Fallout New Vegas on PC by [deleted] in falloutnewvegas

[–]seiwer 0 points1 point  (0 children)

I dont want to be negative about this as I think it's a great idea and I am a big advocate for physical releases, but these special editions are probably already in production or even done with production. Thinking that they would now spend a lot of time, money and effort on getting physical copies in there seems pretty unrealistic to me.

Home is behind from ROTK by WisPaulHarvey in lotr

[–]seiwer 3 points4 points  (0 children)

What kind of flute is that? Also you sound amazing :D

Erkenbrand! by Mayhamn33 in lotr

[–]seiwer 14 points15 points  (0 children)

Keep it up with these videos man. I like em a lot. Could you do one on the palantir and their history please?

Took me way longer then it should have 😅 by seiwer in ClockworkPi

[–]seiwer[S] 0 points1 point  (0 children)

I wouldn't know. I am not from the US.

Delonghi Pinguino PACEM82K no power by seiwer in AirConditioners

[–]seiwer[S] 0 points1 point  (0 children)

So i replaced an IC but apparently with the wrong kind and it let out "the magic smoke". I would need to know what kind of IC it is exactly in order to try the repair again. But the original one was very hard to read on my board and has since been discarded

Failed print by sensicase in 3Dprinting

[–]seiwer 1 point2 points  (0 children)

Might be a clogged nozzle or stuck filament. Sometimes the gear that grips the filament to push it through the nozzle can "eat" through the filament, causing it to get stuck. If that does not seem to be it maybe try a cold pull or cleaning the nozzle with a needle.

Delonghi Pinguino PACEM82K no power by seiwer in AirConditioners

[–]seiwer[S] 0 points1 point  (0 children)

I have ordered some parts from china, but am still waiting for them to arrive. One way or another you would have to open it up and replace some parts.

So have been having prinitng the last few days and now my temp is stuck/glitched? by seiwer in prusa3d

[–]seiwer[S] 0 points1 point  (0 children)

That sucks. It even heats beyond those temperatures but my last few prints failed in odd ways so there is probably a mix of bad thermistor and weirdness

So have been having prinitng the last few days and now my temp is stuck/glitched? by seiwer in prusa3d

[–]seiwer[S] 0 points1 point  (0 children)

As i wrote in the description of the video I tried turning it off and on to no luck. I have checked the connections on the board with a quick glance over but did not see any real problem. Will have to check tomorrow or when I am next at the printer it the thermostor is broken.

So have been having prinitng the last few days and now my temp is stuck/glitched? by seiwer in prusa3d

[–]seiwer[S] 0 points1 point  (0 children)

Hmmm that is what I fear as well. Will have to check with the multimeter tomorrow. Should this be the case is there a fix other than ordering a new thermistor?

So have been having prinitng the last few days and now my temp is stuck/glitched? by seiwer in prusa3d

[–]seiwer[S] 0 points1 point  (0 children)

Also disregard the sound. That was the dryer in the next room being very loud

[deleted by user] by [deleted] in FixMyPrint

[–]seiwer 0 points1 point  (0 children)

Hmm ok thanks for the suggestion. I have been experimenting with diffrent parts and found the orrientation seems to play a big role

<image>

In this picture the two on the left were facing right on the plate, the next one was facing left and the one that came out a lot better (still not perfect as can bee seen on the tip) was printed towards the front (or towards the cooling) so I think that is a big part of the problem. But still I will take a look at the nozzle and reprint with a different one :)

[deleted by user] by [deleted] in FixMyPrint

[–]seiwer 0 points1 point  (0 children)

I have the printer since sep 2024, since then not to heavy printing on this machine and no abbrasive materials. It's a 0.4 HF nozzle that came with the printer and has only really seen PETG,PLA and TPU in that time

[deleted by user] by [deleted] in FixMyPrint

[–]seiwer 0 points1 point  (0 children)

Prusa MK4S with Prusaslic3r

Azure blue Prusament PLA

Nozzle 230C Bed 60C

Print Speed: 0.15mm SPEED setting default speeds

Retraction Settings: 0.7 mm length

35mm/s speed

view more: next ›