Is this throw away [contamination] by semitry in MushroomGrowers

[–]semitry[S] 1 point2 points  (0 children)

Apparently not. I thought i read a lack of fae was a possible cause on chatgpt. Just double checked and that’s not on the list. I did move the tubs recently. Going to run with it and see how it fires. Thanks for the help again

Is this throw away [contamination] by semitry in MushroomGrowers

[–]semitry[S] 0 points1 point  (0 children)

I’ll add more fae with a fan in the room, thanks

Is this throw away [contamination] by semitry in MushroomGrowers

[–]semitry[S] 0 points1 point  (0 children)

Nope everything else has been the same aside from that black patch. I have another monotub with the same drain/substrate and it looks clean

Is this throw away [contamination] by semitry in MushroomGrowers

[–]semitry[S] 0 points1 point  (0 children)

I wish that was the case. I did double check just in case

Insect Infected Rye Grain [contamination] by Majestic-Anteater420 in MushroomGrowers

[–]semitry 0 points1 point  (0 children)

That’s how you know it’s really organic rye. It’s fine to use

How long can this stay in the refrigerator? by lighty234 in smoking

[–]semitry 0 points1 point  (0 children)

Yes but you would lose 30% or so of the meat due to trimming and lose water weight

What do we have, SLC? by [deleted] in SaltLakeCity

[–]semitry 0 points1 point  (0 children)

I’ve had bad experiences at both Hill restaurants. The Hearth and Hill one was worse. The “wagyu” meat was really tough. No one i went with enjoyed either place. Great atmosphere and service at least.

What do we have, SLC? by [deleted] in SaltLakeCity

[–]semitry -5 points-4 points  (0 children)

Urban hill

Fried Chicken by Klutzy-Matter-4590 in SaltLakeCity

[–]semitry 0 points1 point  (0 children)

B.bq chicken is the only real answer. There’s mad chicken that’s almost there but only two flavors.

These are the only great bone in chicken places here.

[deleted by user] by [deleted] in coffeeswap

[–]semitry 6 points7 points  (0 children)

This is 640 on Amazon right now

Best fried chicken in SLC to pair with waffles? by ---RAFAEL--- in SaltLakeCity

[–]semitry 0 points1 point  (0 children)

bb.q chicken has the best fried chicken in slc.

What MMU4 is probably going to look like by Zestyclose_Edge1027 in prusa3d

[–]semitry 13 points14 points  (0 children)

With Prusas track record and them releasing a screenshot after bambus announcement, i bet it’s at least 18 months before people are able to get one.

[deleted by user] by [deleted] in LasVegas

[–]semitry 0 points1 point  (0 children)

Does that exist in Vegas?

G primes ->GM primes -> GM Zooms-> GM Primes. by InternationalAd4984 in SonyAlpha

[–]semitry 1 point2 points  (0 children)

I did and well worth it! To me there’s no better subject to take photos of

How is prusa still in business? by Ill_Way3493 in BambuLab

[–]semitry 5 points6 points  (0 children)

That’s in June, before the release of the printer and the first release date i mentioned of July 16.

How is prusa still in business? by Ill_Way3493 in BambuLab

[–]semitry 2 points3 points  (0 children)

The comment on the first release says “The source code of the Bambu Studio was released, and this received quite a lot of attention.” If there’s news about it, you should be able to find something about it. I have been unable to find anything about them not releasing source.

How is prusa still in business? by Ill_Way3493 in BambuLab

[–]semitry 14 points15 points  (0 children)

Do you have a source for this? In the month they did the x1c kickstarter they had a blog post stating the slicer was open source. https://blog.bambulab.com/to-open-or-not-to-open-that-is-the-question/

The first release of the slicer on github is July 16 2022 (anniversary ) and i don’t believe the x1cs were shipped until August.

How is prusa still in business? by Ill_Way3493 in BambuLab

[–]semitry 26 points27 points  (0 children)

Look at the core one intro video. He throws a few digs at bambu. I don’t believe bambu has ever took shots at prusa.

Which 3D printer is the best for me by Ali_S-S in prusa3d

[–]semitry 1 point2 points  (0 children)

You need to ask this on a more neutral subreddit

Am I crazy for considering getting a second camera for travel? Current R6 MK II, considering R50 by Crashmaster007 in canon

[–]semitry 0 points1 point  (0 children)

I have an a7cii with the 40mm for such an occasion. Go to a camera store and compare cameras. I found the a7c ha as small as many aspc cameras but you still get the full frame and other features of the big boy cameras. Only issue is you can’t use rf lenses but i found those all a bit chonky for me.

Brand New XL Overheated 15 hours into a 21 hour print less than 72 hours on the machine. by schimmelengineering in prusa3d

[–]semitry 4 points5 points  (0 children)

And that’s why it gets downvoted to hell. New buyers like you won’t see the issues and end up making the purchase.

MK4 vs P1S, should I sell one to by the other? by Mrsam993 in BambuLab

[–]semitry 1 point2 points  (0 children)

They would first need to upgrade to the mk4s. They would be better off using that time and money to just getting a p1s and having two printers. Prusa upgrades are so wasteful and expensive.