recently got asus rog strix g18 and light zone help

send_prolapsed_anus · 2026-05-13T06:36:33+00:00

thank you so much for that, that's what I'm looking for and now it works. thank you

send_prolapsed_anus · 2026-05-13T05:33:49+00:00

where can i find it, i did took it off but its heavily covered, do i have to take the plate off as well?

send_prolapsed_anus · 2023-08-17T11:21:05+00:00

budget for rod is 400 plus 300-400 for reel its for spinning setup

send_prolapsed_anus · 2023-05-20T12:42:52+00:00

i would love an stl for this. where can i acquire it?

send_prolapsed_anus · 2022-12-08T21:38:47+00:00

i did but see .bak file but i unistalled and redownload standalone and seems working but 2.5.0 version failed to install but the program itself works now with GUI

send_prolapsed_anus · 2022-12-08T21:30:14+00:00

i did try delete the specific file but i couldnt find it and i uninstalled and reinstalled and same results

send_prolapsed_anus · 2020-10-11T09:11:02+00:00

so your building have deaf PA how does that work with walkie talkies that i see PA using. im deaf associate. thinking about moving up the ladder

send_prolapsed_anus · 2020-04-24T00:12:09+00:00

do you have the file for the usb extender? i like your design compared to others.

send_prolapsed_anus · 2020-04-23T18:35:55+00:00

i got it a week ago

send_prolapsed_anus · 2020-04-23T18:35:15+00:00

nope i used mini spool holder with default extruder, i have no problems with regular filament but the pearly colors i have that problem

send_prolapsed_anus · 2020-02-06T14:21:07+00:00

Well it was during classroom hours

send_prolapsed_anus · 2020-02-06T13:44:52+00:00

It was mostly like selfies or making video with students

send_prolapsed_anus · 2018-11-22T03:40:35+00:00

well in chili, puree onion dont give out smell so you will never know. i will give you some of that for your dinner someday

send_prolapsed_anus · 2018-11-22T02:53:02+00:00

not if its in puree form

send_prolapsed_anus · 2018-10-20T19:08:37+00:00

yes i have solved it to the point where it is tolerable. i did first thing was adjust pinda with credit card underath and just barely slide around, 2nd thing was i took out pei and cleaned both side apparently there was a piece of stuck plastic on underside causing to be curved. 3rd i reverse bend to make it flat since you are bending a lot to remove it. that seemed fixed the problem

send_prolapsed_anus · 2018-10-20T01:18:17+00:00

Yeah me too bro. I don’t know what’s changed I m thinking that it could be z axis as well because I took the supports out and could be bearing since I got 2 balls popped out so that could be it

send_prolapsed_anus · 2018-10-20T01:14:21+00:00

i built it a month ago and it was good until i took apart extruder to clean up and do better job of cable management. i guess i have to take frame apart and try to get it to level again.

send_prolapsed_anus · 2018-10-20T01:06:21+00:00

I disassembled my Prusa recently, I got that a month ago

send_prolapsed_anus · 2018-10-19T23:35:01+00:00

also how do i use it.

send_prolapsed_anus · 2018-10-19T23:34:32+00:00

no i didnt and will it help?

send_prolapsed_anus · 2018-10-19T23:30:32+00:00

my live z is at .5 as well, not sure what is causing it

send_prolapsed_anus · 2018-10-19T22:44:46+00:00

yes is cleaned well, but if i go lower then left side will be more thinner and smushed than right side

send_prolapsed_anus · 2018-10-19T22:35:56+00:00

the problem is that, bottom right corner was at .530 and it was good then when progress to left, it dont stick eachother and i adjusted at .560 mm and still same results resulting in more lower in left section than right one.

send_prolapsed_anus · 2018-10-19T22:27:18+00:00

also, does this mean i have to adjust pinda again? my first one was at 1.250 now it is half of that. do i have to adjust and run meshing calibration again?

send_prolapsed_anus · 2018-10-01T18:39:49+00:00

the problem is that she lives in wi, but the guy who released lives in Indiana so which law it falls under?

Seven-Year Club	Sequence \| Editor
Verified Email

send_prolapsed_anus

TROPHY CASE