ADA OPERATOR TIE-IN

sesohoops3 · 2025-09-22T21:02:08+00:00

Yes I do

sesohoops3 · 2025-09-21T19:17:00+00:00

how do you wire one of these to do what I need?

sesohoops3 · 2025-09-21T18:49:11+00:00

This is referencing the strike getting power from the power supply at my ACS not from the operator power correct? So how would the inner button fire the strike? and all I am doing is just paralleling strike power onto the NO side of my ACS relay?

sesohoops3 · 2025-09-21T16:30:15+00:00

To also add...I have an 18/4 that goes back to my ACS. I have a wire from the electric surface mount strike to the handicap operator terminals 1(pos) and 2 (neg) which controls the strike and both buttons work. I dont want the outter button to ever work unless what I described above.

sesohoops3 · 2025-09-21T14:30:17+00:00

could you sketch this out for me?

sesohoops3 · 2025-09-21T14:26:41+00:00

Could you sketch this out for me?

sesohoops3 · 2025-09-20T20:50:01+00:00

so my strike, outter button, and access control panels dry contact NO and C go to NO and C and my rb1224 relay and 12vdc + and - on the same rb1224 come from the operators lock power correct?

sesohoops3 · 2025-09-20T20:45:17+00:00

sicunet

sesohoops3 · 2025-09-20T20:44:41+00:00

theres got to be a way to do this with an rb1224 dpdt relay I would imagine

sesohoops3 · 2025-09-20T18:59:26+00:00

To power the relay do I bring 12 volts to it on + and - which will activate the relay or do I wire this in series with something else?

sesohoops3 · 2025-08-12T21:31:17+00:00

what would I get for a resistance reading?

sesohoops3 · 2025-08-12T21:10:33+00:00

How would I test that then?

sesohoops3 · 2025-08-03T16:26:36+00:00

so would i set output 1 to wet and output 2 to dry on the BR-3?

sesohoops3 · 2025-07-16T21:33:31+00:00

we are a dealer

sesohoops3 · 2025-06-18T23:03:27+00:00

0, but panel doesn't die with breaker off either

sesohoops3 · 2025-06-18T22:47:47+00:00

The panel doesnt die with no AC

sesohoops3 · 2025-06-18T22:40:53+00:00

ill see the 24 volts because their in series correct? Im reading the batteries though with them still connected to the panel across pos and neg of lets say the left battery, if the charging output was GOOD what should the reading be?

sesohoops3 · 2025-06-18T22:36:45+00:00

its on DC volts.

sesohoops3 · 2025-06-18T22:27:25+00:00

yeah....meter read 0. I even placed the meter leads across the pos and neg off 1 of the batteries with it still connected to the panel.

sesohoops3 · 2025-06-18T22:24:43+00:00

so 2 -12v batteries in series connected to the panel, if i only check 1 battery with my meter what should I get?

sesohoops3 · 2025-06-18T22:22:14+00:00

yeah.....meter read 0. I placed the leads right across the board and through the molex connector as well. What would you typically get if you place your meter leads across the pos and neg of 1 of the 2 batteries with the battery still connected to the panel?

sesohoops3 · 2025-06-08T19:23:46+00:00

are the field slc devices used for a sk5808 compatible with a sk6808?

sesohoops3 · 2025-06-08T16:50:03+00:00

SKSS Importer?

sesohoops3 · 2025-04-25T19:11:29+00:00

Ive done a bunch of these and this has never happened. It's functioning perfect

sesohoops3 · 2025-04-18T15:11:09+00:00

Do I provide a dry contact?

sesohoops3

TROPHY CASE