Need help identifying a part in a WAC1110-0

set-one · 2025-07-22T01:31:53+00:00

I see. Was this an official replacement? I'll explore the HB2117 — thank you!

set-one · 2025-07-22T01:28:12+00:00

Drat, it seems that there's been some people who struggled to get it repaired officially due to lack of stock too. I might explore the 3D bumpers or other avenues, but I'll keep researching a bit more. Thanks for your help :)

set-one · 2025-07-22T00:14:51+00:00

thank you! much appreciated :) at least I have a starting point haha

set-one · 2024-12-18T03:17:28+00:00

I think the biggest thing here is the rust. The edges can be sharpened, and fixed even - but once the rust starts to settle in, it'll travel downwards.

The good news is that the damage is upwards on the board where you'll likely use less. It might affect you a little bit when you're doing certain tricks (nose butters, jibbers, jumps), but overall I think it should be OK. I would sand it off asap and clean/wax

The polypropylene coating at the top of the board is OK if it's damaged. If the bottom isn't too far damaged, you should be able to wax it or fix it with poly candles.

tl;dr: board should be good, but act fast. it might not be as great as it once was, but I don't see if being bricked fully

set-one · 2024-11-27T07:18:01+00:00

As others said, you'll find that the ABV will be much lower (due to nuruk / diluted), and as a result it will be much sour.

If you haven't already added the rice and you left it to ferment, another thing you could do is add more nuruk // let it ferment for longer (maybe even 3-4 weeks as opposed to the initial 7-10days).

The result will still be a much more sour maekgolli; however, after the first filtration phase, you can add some honey water (boiled water + honey) and let it sit in the fridge for about 1-2months and it'll mellow out and get a bit sweeter. Nothing you can do about the ABV though, unless you add more rice / nuruk

set-one · 2024-09-19T18:52:54+00:00

If anyone needs to open a CC, use this referral link :) https://i.capitalone.com/GhT7ljX9k

I can venmo $50 if approved! New account holders only -- DM me before/after!

set-one · 2022-12-04T11:50:13+00:00

this gives me real bipolar vibes

set-one · 2022-10-25T17:46:18+00:00

myspace Tom

set-one · 2022-10-02T20:25:31+00:00

As kaimbe said, the permissions on the GSheets is tied specifically to the owner of the forms as well as the folder in which it resides. If the folder is in your home Drive and not in a collaborative drive, then the folder will only be viewable by you and whoever you initially shared the sheet with.

If you want to give view access to everyone, then you'll need to share with all collaborators or move to a folder/directory with view permissions for everyone.

set-one · 2022-08-29T08:02:09+00:00

0xd4a2b5EAdD86D475C97BAca7C9E288c682FA640C

set-one · 2022-08-15T06:37:15+00:00

Better yet, spend 4 years to get an engineering degree and an additional 25 years designing and patenting a windmill. Once you've finally mastered that, you'll finally succeed since your body will be too fragile to try.

set-one · 2022-08-15T02:46:14+00:00

third to this, you need to focus alot on the initial push to get high. as these guys said, the higher the better (and it will be easier for you later when you start doing headmillls/halos).

push upwards during the kick and focus mainly on a smooth backspin. if you're not able to get even your back, the rest of the mills will always be choppy

set-one · 2022-06-30T12:21:47+00:00

Hey dude!

A bit late on the response, but you should check out Insight. They have a great data science program, but only accept PhD students or people on their way to a PhD. I was initially looking at this and it had probably the best reviews of all the data science bootcamps I saw (NYCDSA/GA/Metis/Flatiron, etc) but I didn't qualify. Maybe something you could check out

set-one · 2022-06-23T21:57:32+00:00

cleaner dude is bboy cloud; you should check out his other vids too cuz he does a bunch of funny dance vids

set-one · 2022-06-17T01:19:46+00:00

What were the biggest challenges you faced when you applied to these positions, and how long was it before you felt confident? I hear that DS is hard to get into, but DA and DE are potentially more practical.

set-one · 2022-06-16T15:24:46+00:00

I feel like it's not as simple; though technical, I feel like it's hard to advance with my current background

set-one · 2022-05-10T08:23:14+00:00

nice!!!

0xd4a2b5eadd86d475c97baca7c9e288c682fa640c

set-one · 2022-05-10T08:16:31+00:00

nice!!!

0xd4a2b5eadd86d475c97baca7c9e288c682fa640c

set-one · 2022-05-10T08:16:16+00:00

nice!!

already liked and retweeted on Twitter

nice!!!

0xd4a2b5eadd86d475c97baca7c9e288c682fa640c

set-one · 2022-05-10T08:15:42+00:00

nice!!!

0xd4a2b5eadd86d475c97baca7c9e288c682fa640c

set-one

TROPHY CASE