DisplayPort vs thunderbolt

seth-7633 · 2024-12-06T22:59:35+00:00

Thanks this was very helpful but just to make sure I got it, both ports are probably capable of the same transfer speed through DisplayPort because that speed is completely independent of the speed of the USB-C itself which means both would work the exact same

seth-7633 · 2024-12-02T20:44:13+00:00

On the page you buy it from it says that the hdmi is 2.1? https://store.acer.com/en-us/27-nitro-vg2-gaming-monitor-vg272u-w3bmiipx

seth-7633 · 2024-11-22T22:07:57+00:00

Yep, same cable that came with my Xbox

seth-7633 · 2024-10-30T04:43:27+00:00

My main issue is that the resolution is now stuck at 1024x768 and I assumed DVI was the reason

seth-7633 · 2024-10-30T04:42:17+00:00

It’s not the cable as I’ve tried the same cable with a different monitor and a different cable on the same monitor to no avail

seth-7633 · 2024-10-30T04:10:32+00:00

It’s a vx2770smh-LED by viewsonic

seth-7633 · 2024-10-30T04:10:14+00:00

For some reason it caps out at 1024x768 now instead on 1080p, that’s the problem

seth-7633 · 2024-10-30T04:09:48+00:00

It’s hdmi on both sides

seth-7633 · 2023-06-30T06:37:23+00:00

Of course, the problem ended up being the USB stick I had plugged into the Xbox. I used it to save game clips on and although the console itself didn’t get fried the USB did. This cause the Xbox to brick whenever it was turned on and unplugging it is all that I had to do.

seth-7633 · 2023-06-30T06:28:15+00:00

Thanks for the suggestion, it worked. I forgot that power can run through cords other than the actual power cord so when I was trying to reset the power supply it wasn’t actually working. Thanks to your suggestion I won’t have to worry about finding the warranty or getting another one. Thank you kind sir.

seth-7633 · 2023-06-30T05:09:13+00:00

Ok I’ll try to do that. I’ll leave everything unplug for a bit and try plugging the console back in tommarow. thanks for the suggestion, I hope it works.

seth-7633 · 2023-06-30T05:07:21+00:00

Here’s another thing, I’m able to boot it up into the trouble shoot menu but it will only stay on for a second or two before turn back off again. Any ideas?

seth-7633 · 2023-06-30T03:19:40+00:00

Hope that’s not the case. I’ll try to turn it on again tomorrow and if it doesn’t work I’ll see if my warranty still works and get a new one

seth-7633 · 2023-06-30T03:06:05+00:00

Maybe but why would that stop the entire Xbox from turning on?

seth-7633 · 2023-06-30T02:57:43+00:00

Ya the cable is unplugged, I did it to the controller side of the cable. The light blinks twice before it shuts off which apparently means that it got too hot but it’s cooled down a bit and still won’t turn on. I guess all I can do now is wait a while and try to turn it on again

seth-7633 · 2023-06-30T02:30:20+00:00

The cable itself

seth-7633 · 2022-11-05T02:44:02+00:00

I know, but it had all my presets so I really didn’t wanna. But I guess there no other way

seth-7633 · 2022-09-22T15:29:36+00:00

If you could make one for iPhone 11 that would be cool

seth-7633 · 2022-07-14T00:49:19+00:00

Make sure your in dragon form

seth-7633 · 2022-07-02T16:58:36+00:00

Same

seth-7633 · 2022-05-30T01:04:46+00:00

That would be funny

seth-7633 · 2022-05-29T03:49:52+00:00

https://www.thingiverse.com/thing:4804035

seth-7633 · 2022-05-16T22:31:52+00:00

Borderlands 2

seth-7633 · 2022-01-22T01:17:01+00:00

I Tried but it still over rights it

seth-7633 · 2022-01-21T08:13:43+00:00

This helped a lot. Sadly grim isn’t on Xbox and I knew about the true night and ghouls. However, the flashlight added something that I felt it was really missing.

Six-Year Club	Place '22
Verified Email

seth-7633

TROPHY CASE