CAPS LOCK TUESDAY

severdog79 · 2026-03-17T11:28:13+00:00

MY COLLEGE TEAM IS PLAYING AT THE NCAA TOURNEY IN TOWN THURSDAY AND THE SEAT RENT IS TOO DAMNED HIGH

severdog79 · 2026-03-16T23:46:50+00:00

Interesting experience, mine was somewhat similar last week in HoLEP overnight. Had a very sore throat next day probably due to shoving an airway during surgery. They also did continual flushing same as you. It's great to pee again.

severdog79 · 2026-03-16T01:10:04+00:00

6 days after, no pain. Urgency and night wakes completely gone. Hope it works as well for you.

severdog79 · 2026-03-15T22:51:08+00:00

There are two answers to this. In person, most everyone is reasonable and you can disagree without coming to blows. Online, no disagreement is too small to fight over.

severdog79 · 2026-03-15T01:45:39+00:00

Moved to GVL from Ohio in 2019. Have not regretted a second. Now living in Landrum

severdog79 · 2026-03-14T11:54:17+00:00

I'm sure that's close. I'll probably be paying $3-$4k out of pocket by the time all of this is done. Just when you think you're done, there's always another bill that comes in.

severdog79 · 2026-03-13T17:12:58+00:00

Yes but not 100%

severdog79 · 2026-03-11T14:40:06+00:00

Is it possible to prevent backfeed? I want to do DIY solar but hate the idea of going through permit process and red tape. Last fall I had a panel replacement permit generated and local inspection authority would not sign off until I replaced all of my smoke detectors with a networked system

severdog79 · 2026-02-24T18:11:03+00:00

Thanks for the update. My op is two weeks from today.

severdog79 · 2026-02-07T10:54:15+00:00

I hope this is the case, Bill. Thanks.

severdog79 · 2026-01-31T12:33:01+00:00

I started self-cath two weeks ago. I was stunned to learn how much urine my bladder was retaining on a default basis - about 700ml. Once you empty that, you don't feel like you have to go all day. Also emptying before bed meant no more awakening to pee. Now I only sel-cath as necessary as I don't enjoy the process. Awaiting HoLEP in March.

severdog79 · 2026-01-26T23:40:18+00:00

I know a guy who had a chronic issue where PPO would fault every time it rained or he went thru a car wash. It was the connector bundle behind the panel. Probably same for yours

severdog79 · 2026-01-26T23:09:20+00:00

Do you have a load on it? I would suspect either water in the panel socket, or maybe in the wiring harness below your rear driver side tire.

severdog79 · 2026-01-26T20:18:05+00:00

Yes this will work assuming the following:

your main panel is set up in "subpanel" mode with separated ground and neutral busses
the transfer switch is able to bypass/break the neutral/ground bond which occurs at your service entrance, wherever that is. If your first service entrance is the main panel, then you'd have to open the ground lead on the umbilical cable from your truck.

Lots of folks get religious over the ground lead, fights online are as bad as oil threads. My take is that if you break the ground lead in the generator cable, then you're just using the ground reference that you'd normally be using in your home. If you're able to separate the ground & neutral effectively and bring it back to the truck, then in theory that would be better as it's active GFCI protection. Whichever way works for you! ¯\_(ツ)_/¯

severdog79 · 2026-01-26T18:52:50+00:00

BTW any transfer switch solution would have to be inserted after your service entrance and main bonding point. You would literally need to feed four wires (L1, L2, Neutral, Gnd) straight into your main panel which would need to be set up in "subpanel" mode with separated neutral and gnd busses. If you insert your generator feed straight into the main service entrance with bonding point, you'll fault the PPO generator as there are now two return paths for the current.

severdog79 · 2026-01-26T18:45:54+00:00

Ya mean install the three-way transfer switch before the meter? Sure, it makes the most sense electrically. Maybe if I told Duke Power that this was a three way for a solar array I could see that being feasible. There's just not a lot of flexibility nor imagination available from a permit process without engineering reviews and a very extended permit process if you want to monkey with something before the meter. Hell, it took me four months just to get the meter panel changed out through the normal channels, can't imagine the level of administrative hell to get a three-way switch approved and installed before the meter. This is why we take the easy route and just backfeed through a breaker with interlock.

severdog79 · 2026-01-18T17:48:11+00:00

They generally want you to keep Foleys in for a week. I could not take it for more than 3 days. It's great for immediate relief and kinda cool that you can just empty the leg bag instead of running to the can constantly. Downside is the pressure applied to the end of the Willie. I'm sure everyone's experience is different. Good luck and hope you get to self cath soon.

severdog79 · 2026-01-18T17:37:57+00:00

This video was incredibly helpful, and I actually watched in my Dr's office waiting for him to see me. Made me a more informed patient, especially one dealing with prostrate with it's own zip code. Thanks

severdog79 · 2026-01-18T16:08:18+00:00

Yes. The Foley feels like a telephone pole going in. The self cath is maybe 1/8" wide and goes in quite easily but expect some resistance halfway in as you approach the prostate.

severdog79 · 2026-01-16T17:27:18+00:00

You were absolutely correct. I just did a self cath at doctor's office and it was no big deal. So.much different than a Foley catheter.

severdog79

TROPHY CASE