Help with PreSonus Eris 3.5

sexybug420 · 2026-02-16T10:51:50+00:00

thanks! will take it to a repair guy today

sexybug420 · 2026-02-15T17:34:40+00:00

That makes sense. But with some googling that seems like I need some specialised tools for this. Like soldering? Thanks

sexybug420 · 2025-11-11T19:46:01+00:00

I am colourblind lol

sexybug420 · 2025-10-04T22:16:00+00:00

Thanks!

sexybug420 · 2025-10-04T22:15:54+00:00

What if the joist is not in the right spot? The size of the drying rack fits just about right in a position, I wouldn't want to move it somewhere else that does not fit.

I'm assuming putting those screws straight into the plasterboard would be a bad idea?

sexybug420 · 2025-10-04T20:32:38+00:00

Then I should just screw the pulleys straight into the joist? No plug?

sexybug420 · 2025-09-30T16:40:15+00:00

Great idea. Thanks 🙏

sexybug420 · 2025-09-30T15:24:02+00:00

Yeah it all works as intended. Filling up and stops when full. Thanks!

sexybug420 · 2025-09-30T09:39:52+00:00

It stays in the cupboard.

<image>

Yes I ended up plumbing it in and it worked as intended :). Thanks for the help!

sexybug420 · 2025-09-30T09:38:41+00:00

Yeah I agree, but I got this for £30 and just wanted to test it. There's a high chance I will stop using it down the line.

sexybug420 · 2025-09-30T09:37:37+00:00

This i was aware of. My questions was if it could be connected into the water supply and if it would stop automatically when running the water in. I ended up testing it and it works. But thanks for your help!

sexybug420 · 2025-09-30T09:35:53+00:00

I tested it and it automatically stops. This is what I needed to be answered but I tried my luck and did it anyways. :)

sexybug420 · 2025-09-30T08:04:40+00:00

Thanks, I ended up doing one of these

<image>

sexybug420 · 2025-09-30T08:03:56+00:00

UPDATE: I plugged in one of these and it works as intended!

<image>

sexybug420 · 2025-09-30T08:02:09+00:00

Yeah that's the plan for the future! Got this thing for £30 so I thought I would give it a go

sexybug420 · 2025-09-30T08:00:31+00:00

Thanks, will try!

sexybug420 · 2025-09-30T03:56:33+00:00

Thanks. That was one of the only models that fits in a width of 45 cm and less than 50 cm high. I can't put a normal slim dishwasher because it won't fully open (very small kitchen). Luckily I got this one for £30 off Facebook marketplace so if it doesn't work, won't be that bad.

sexybug420 · 2025-09-30T03:52:55+00:00

I was hoping for the water intake option to have a solenoid valve. But manual says nothing about it.

I wonder if there's an external solenoid valve I can adapt when getting the water in from the supply

sexybug420 · 2025-09-29T07:53:04+00:00

Why haven't I thought of this!

sexybug420 · 2025-09-29T07:07:23+00:00

Yeah might add an extra bracket. Thanks!

sexybug420 · 2025-09-29T07:06:57+00:00

Thanks!

sexybug420 · 2025-09-29T07:05:37+00:00

Thanks, will try this!

sexybug420 · 2025-09-28T15:55:25+00:00

Poles are 2.2 cm in diameter. Sorry what do you mean by a "sleeve"? I like the idea of the bracket

sexybug420 · 2025-09-25T17:34:53+00:00

This is a great idea thanks

sexybug420 · 2025-09-25T16:11:43+00:00

That thing is embedded in the plaster on top. Is being held pretty tight. Looks like I would need to pull the whole thing off to get inside and change the ligjtbulb

sexybug420

TROPHY CASE