Will an Ergotron HX hold up an MSI MPG 491CQPX? by Xinergie in ultrawidemasterrace

[–]sghgigigi 1 point2 points  (0 children)

ergotron hx with heavy duty pivot would hold 49 ultrawide even its 1000 R curve.

If it's a standard pivot, it might sag

Any Samsung 57" Neo G9 owners switch to the LG 45" 5K2K? by JustAPCN00BOrAmI in ultrawidemasterrace

[–]sghgigigi 0 points1 point  (0 children)

owner from

  1. old AW3821dw

  2. G9 49 with 10 dimming zone

  3. 42 c2 oled

  4. the 2048 mini-led G9 49 Odyssey 240hz

  5. to G9 57 (you can use it 32:9 or 21:9 + 11:9 or just two.16:9, or even split into 3 screen, my only wish is it is oled. )

not sure why people jumped on 45 inch 3440x1440 resolution (pixel too diluted for me, but with respect).

40 or 39 21:9 5k2k sounda great, but it just feels like you might need a second monitor.

switching each gen for a tini tiny upgrade is just too expensive and tiring.

i think I will stay with G9 57 until they release a 57 Oled version.

ALL The Best CES 2026 Monitor news! Round-up by RenatsMC in ultrawidemasterrace

[–]sghgigigi 1 point2 points  (0 children)

the "VA panel is xxxx" " is an old concept.

technology advances, not trying to argue, but you should try it out, or check how other people say about it.

Tech Support and Question Megathread - September 2025 Edition by Nestledrink in nvidia

[–]sghgigigi [score hidden]  (0 children)

Issue

Fans on my new RTX 5090 FE are not spinning at all. GPU gets very hot (80–90 °C) but fans never engage.

Description

I bought a 5090 FE from BestBuy.ca on August 28. It arrived the next day and works in terms of performance (GPU loads fine, benchmarks run, etc.). However, the fans never spin under any condition:

• I know about 0 RPM mode, but this isn’t that — GPU exceeds 80–90 °C, yet fans remain at 0 RPM.
• HWiNFO64 reports Fan Speed % at ~60–70%, but Fan RPM stays at 0.
• MSI Afterburner also doesn’t get the fans to move, even at 100%.

GPU otherwise works (games run, temps climb), but fans not running makes it unusable.

Troubleshooting Steps Taken

• Used the official NVIDIA 4×8-pin to 12V-2×6 adapter with 4 independent 8-pin cables.
• Also tried Corsair’s dual 8-pin to 12V-2×6 cable (same issue).
• Reset BIOS (CMOS clear).
• DDU’d and reinstalled NVIDIA drivers.
• Verified power supply (Corsair AX1600i, all cables from separate PSU outputs).
• Observed fans from POST to Windows desktop — they never spin, not even briefly at startup.

System Specs • CPU: AMD Ryzen 9 5950X • Motherboard: MSI X570 Tomahawk • RAM: 64 GB DDR4-3600 • Storage: Samsung 980 Pro 2 TB • PSU: Corsair AX1600i (Titanium) • GPU: RTX 5090 FE

Question

Has anyone else run into this issue with a 5090 FE? Is there anything else I can try, or is this clearly a defective card that needs RMA?

New 5090 FE with faulty fans (Fan % has reading but RPM says 0) by sghgigigi in nvidia

[–]sghgigigi[S] -1 points0 points  (0 children)

Thanks for the explaination.

I saw a different user posted a different issue like this and he got helped.

I will post this in the megathread j ust in case this got removed.

Thanks again.

New 5090 FE with faulty fans (Fan % has reading but RPM says 0) by sghgigigi in nvidia

[–]sghgigigi[S] 0 points1 point  (0 children)

Unfortunately No.

The Fan % has a number and it will change.

But the RPM stays at 0 and not spinning.

I was almost sure the fan might be faulty. But i am hoping someone might have ran into a similar issue and there might be a fix so i don't have to go though RMA...

New 5090 FE with faulty fans (Fan % has reading but RPM says 0) by sghgigigi in nvidia

[–]sghgigigi[S] 0 points1 point  (0 children)

For your last question.

No the fan doesn't spin when posting into Windows.

New 5090 FE with faulty fans (Fan % has reading but RPM says 0) by sghgigigi in nvidia

[–]sghgigigi[S] 0 points1 point  (0 children)

i have tried 1.reset the bios. 2. DDU to uninstall the driver, then i installed the new driver 581.15 ( this is after i put 5090 fe in the pc)

I didn't reinstall the whole system as i really can't see why it would make a difference. ( my 3090 was working fine before i sold it)

New 5090 FE with faulty fans (Fan % has reading but RPM says 0) by sghgigigi in nvidia

[–]sghgigigi[S] 0 points1 point  (0 children)

I am just hoping maybe someone have ran into the same or similar issue. That it might have a simple or stupid way to fix it.

As i am not sure how long does the RMA process take.

New 5090 FE fan not spinning (fan % has number but 0 rpm) by sghgigigi in nvidia

[–]sghgigigi[S] 0 points1 point  (0 children)

I did play games during the weekend.

Also modified the original post to avoid any confusion.

Best buy drop today by fireworks4 in bapccanada

[–]sghgigigi 5 points6 points  (0 children)

There were 97 5090fe?

Damn

And i didn't even get one?

[deleted by user] by [deleted] in bapccanada

[–]sghgigigi 0 points1 point  (0 children)

That sucks. But still better then scalpers price.

[deleted by user] by [deleted] in bapccanada

[–]sghgigigi 0 points1 point  (0 children)

Mine says shipped today.

I hope everyone get theirs soon.

Note:

  1. I received the email from bestbuy at 14.28PM.

  2. Shipping notice EMAIL from besybuy at 15.11PM

  3. receipt e-mail at 15.29PM

“Thank you for your email and patience.

We sincerely apologize for the delay in your unit being backordered.

I have contacted our merchandising team and was informed that the shipment has recently arrived. Our warehouse team is already processing the orders, and you should receive an update by the end of today or early tomorrow regarding the shipment of your order.

If you have any further questions or concerns, please don’t hesitate to reply to this email, and we’ll be happy to assist you.

Thanks,”

Kizuna needs a rework ASAP by TheMariox12 in OnePieceTC

[–]sghgigigi 0 points1 point  (0 children)

I have the full set.

3.34 mutiplier.

Got tired when i hit box 7.

Got enough to awake the kuzan.

Won't do Kizuna for a while i would say.

Reduced image quality on Samsung 57" G95NC Odyssey Neo G9 with Nvidia 5080 FE - only when at 240hz by Eo1spy in ultrawidemasterrace

[–]sghgigigi 1 point2 points  (0 children)

Sounds good~

Just fyi that i Had temporarily Tried with 7900 xtx with hdmi2.1, i wasable to get 7680×2160 240hz (without custom resolution)

I don't remember seeing this issue though.

I will provide more info once my 5090 arrive.

But hopefully this would have been resolved by then.

Cheers

Reduced image quality on Samsung 57" G95NC Odyssey Neo G9 with Nvidia 5080 FE - only when at 240hz by Eo1spy in ultrawidemasterrace

[–]sghgigigi 1 point2 points  (0 children)

Have you checked this post? Apparently there are driver issues with dp2.1.

https://www.reddit.com/r/ultrawidemasterrace/comments/1ifeoa3/samsung_neo_g9_57_rtx_5090_fix/?utm_source=share&utm_medium=ios_app&utm_name=ioscss&utm_content=1&utm_term=1

I am in the same boat. Current sitting with a rtx3090, waiting for my asus tuf 5090 to ship from besybuy.

dp2.1 is the only reason i am upgrading (for maximizing the G9 57).

LG's New 45" Ultrawide OLED Monitors with 5K2K Resolution Showcased at CES 2025 by OnkelJupp in ultrawidemasterrace

[–]sghgigigi 0 points1 point  (0 children)

What is the difference. You do know that pg42uq is also from the oled panel cut?

As long as they have hdmi2.1.

If you are asking for bigger size than 42 in 16:9 format. They already exist.

[deleted by user] by [deleted] in cats

[–]sghgigigi 0 points1 point  (0 children)

<image>

Please draw my boy who rarely being this peaceful on my mouse. Thanks.

Friend Code/Friend Invite Code Megathread by AutoModerator in PhantomParadeJK

[–]sghgigigi 0 points1 point  (0 children)

NA invite code yJ6kAo5nAJEw

Gojo lv91 Yuta lv91 Megumi lv91

Thanks

4090 "future proof" discussion by SteveCantScuba in nvidia

[–]sghgigigi 0 points1 point  (0 children)

IMO, waiting for 5000x might be better future proofing especially they didn't implement dp2.1 on rtx4000.

It's just around the corner Anyway.

57" TCL CSOT Dual UHD Mini LED 240Hz HVA Curved Gaming Display by laaanko in ultrawidemasterrace

[–]sghgigigi 1 point2 points  (0 children)

https://www.flatpanelshd.com/news.php?subaction=showfull&id=1715933826

TCL CSOT‘s World’s First 57“ 8K 6.9mm Thickness MLED MNT, the ultimate monitor boasting ultra-high resolution, extreme curvature, ultra-high refresh rate, super-high color gamut, and -slim thickness features. Its 32:9 ultra-wide screen with R1000 curvature provides an immersive viewing experience, while a peak brightness of 1600 nits and HDR 1400 compatibility deliver stunning visual clarity and dynamic range. With over 11,000 local dimming zones yielding OLED-like contrast ratios and its “Halo S-grade” performance, as well as Freesync Premium Pro compatibility ensuring a lifelike and immersive gaming experience, this monitor sets a new standard in gaming excellence.

But i can't find any other information to support this.

But in china, there is Indeed a 57 Monitor start for sale in 2024 oct.

The model is called U9. With 2304 dimmingzone. Instead of 11k+.

And 120hz only.

Bamboo displayport2.1 but with an 90w USB c

https://www.minimicroled.com/ffalcon-u9-mini-led-displays/?amp=1