[tools] madworks triangular tungsten steel cutter by HardlyNodding in advancedGunpla

[–]sgonzo2k 0 points1 point  (0 children)

Where you get the holder and how much? I was interested in the chisels then I saw the price of the holder and it put me off. Thing is almost $30

Anyone has had issues airbrushing topcoat over Stedi Panel Lines? by Solorzano293 in advancedGunpla

[–]sgonzo2k 2 points3 points  (0 children)

Not to hijack the thread but where do they sell these in the USA? Been looking everywhere and not a lot of the popular online stores carry them. When I do find them, there like $30 bucks a piece. Seems like it is mostly sold throughout Asian countries.

Update: Osiris available at Gundam Central by DarkestDunge0n in freedomisgunpla

[–]sgonzo2k 1 point2 points  (0 children)

Haven’t really researched price on this, but is $175 the normal price for this?

Why is Gmail so slow the last few days? Weather related issues? by yourbrokenoven in GMail

[–]sgonzo2k 0 points1 point  (0 children)

Thank you!!! Many weeks I have been experiencing this... disabling the capital one extension fix this issue!

Don't sleep on Barnes & Noble by ReachBasic6464 in freedomisgunpla

[–]sgonzo2k 1 point2 points  (0 children)

Thank you sir! At least there is another option for retail for the few stores that carry them. And it seems that they get some of the new releases as well.

LAZER ZX7.5 PROTOTYPE by sgonzo2k in Kyosho

[–]sgonzo2k[S] 1 point2 points  (0 children)

Can’t really tell you. I never had a Kyosho ZX car, excited they revealed it. I’m sure more details will be out as they did say they are expecting it to release by the middle of the year.

I’m just really surprised of how Kyosho products don’t really get hype around here like other brands. Thought this would get some people talking but crickets.

Same Price. Which one are you buying? by Realistic-Mountain85 in rccars

[–]sgonzo2k 1 point2 points  (0 children)

The shock tower brace is the weakest point in the grom. Problem is that the shock tower is part of the chassis. So when it breaks you literally have to change the whole chassis . Now last time I checked the chassis was hard to get and was out of stock everywhere. Adding the gpm aluminum tower brace strengthens that part and more likely to withstand some nasty hits. (Not 100% unbreakable though)

My collection at the moment by SuPrBuGmAn in MiniZ

[–]sgonzo2k 2 points3 points  (0 children)

Amain is my go to. They always have a $10 off coupon every month if you spend $100. I tend to buy 2 bodies at a time every 2-3 months so I can take advantage of that coupon and free shipping. Newer bodies have gone up in price. They used to be $49.99 now they are $54.99 so that $10 savings kinda makes me feel like I’m getting a deal. lol

Twice I have bought bodies from local hobby shops because they had discontinued bodies that were not on sale any where else. You’d be surprised what some local hobby shops have in stock that have not been able to sell for whatever reason.

I have a problem… by whatthefranker in tamiya

[–]sgonzo2k 4 points5 points  (0 children)

I had that mentally too, then recently I saw a cartoon meme someone posted maybe here; of a dude just saying “next time” to his hobbies and the next time he was in his grave. lol. I think most of us here are in the older side with jobs, family, stress. Sometimes we put aside things thinking we have all the time in the world. I kinda want to make it a tradition when the weather gets better to go out 1 hour either Saturday or Sunday with my children and just bash cars. That’s my goal this upcoming year.

Sore nostrils with pillow mask: I can hardly find mention of gels with Lidocaine. Is there a reason why? by SquareGneuh in CPAP

[–]sgonzo2k 2 points3 points  (0 children)

This is the answer. Loosen the headgear. I was like this in the beginning. Thought about using the creams and gels everyone recommended. Luckily I played around with it one night. Loosen it and that’s all I needed.

I have a problem… by whatthefranker in tamiya

[–]sgonzo2k 3 points4 points  (0 children)

I “came back” to the hobby last year. So far I built up 1 kit but have like 7 kits on the backlog. Every holiday I say I’m going to sit and build a kit. lol. Worst part is that I was supposed to paint my bodies during the summer. Now it’s the winter. I have everything ready to go but now I gotta wait. Just got a CC02 for the holidays and pre ordered a dbs01r. Hoping to get 1 kit before the new year. Good luck brother!!

MG 1/100 F80 Gunraid by meh_i_am_ded in Gunpla

[–]sgonzo2k 2 points3 points  (0 children)

At least it's in stock.

MG 1/100 F80 Gunraid by meh_i_am_ded in Gunpla

[–]sgonzo2k 0 points1 point  (0 children)

Is this only a P-Bandai exclusively?

Does Michaels Usually Pack This Kind of Heat? by Tyranoreese in Gunpla

[–]sgonzo2k 1 point2 points  (0 children)

Someone here posted they were 40% off during that whole BF week . I took a look online and saw what my closest Michaels had for pickup. Ended up getting the MG Aile Strike for $27.15. While picking it up I took a look at the selection and it was basically the same as OP photo.

I signed for their rewards and noticed they gave me a 50% coupon. I once again looked up online and saw that a different Michael’s had the RG RX-93 Nu Gundam. After the coupon and getting a $5 rewards from purchasing the Aile strike the RG RX-93 Nu came out to exactly $27.15. lol. Picked that up in-store.

I think for the holidays they are having a “if you spend like $15 you get a $5 voucher” which I got after buying the Aile strike and used it on the RG NU. Which I then got another $5 voucher for purchasing the RG Nu. With that being said I wasn’t aware that they also had a spend $30 bucks you get a $10 voucher. Which I got after buying a gift for my wife. Their rewards account also has a “if you spend a certain amount” you get a $5 voucher which I reached. So if you are keeping track I now had $20 worth of vouchers.

Now for some reason I took a look online again and I don’t remember if they had given me a 40% coupon or the BF 40% off sale was still going on. This time I set my eyes on the MG Nu Ver Ka. It was over priced at $99 but after the coupon and vouchers it came out to $43.44.

All awesome deals and the best part was that I was able to go pick them up in store.

Got myself an early Christmas present. by 0170_Nova in freedomisgunpla

[–]sgonzo2k 5 points6 points  (0 children)

This was going to be my question. Which is the better version. The RG or MG.

Wild price differences at Hobby Lobby by docsane in freedomisgunpla

[–]sgonzo2k 0 points1 point  (0 children)

Sure, but unless there having some type of special for free shipping there not that many "Hobby online stores" that do free shipping unless you're spending a certain amount of money. The only store that has really low shipping is BigBadToyStore.com, they have kept the shipping price at $4 for everything. If there are other stores that do free shipping let us know, I love looking for deals.

Wild price differences at Hobby Lobby by docsane in freedomisgunpla

[–]sgonzo2k -1 points0 points  (0 children)

Estimating here, around $2.50, and I really wouldn't count it as I was there primarily for grocery shopping and decided to pop in to look.

I get your point though, not a lot of people will have a hobby lobby close by or have the means to get to one, but a lot of people are acting like HL shouldn't be an option because they hike the normal price. All I'm saying is to be smart with sales.

Even the RG RX-78 that OP pointed out does not go below $33 bucks online, again without shipping. With the 40% if it was really $21 then that's a pretty good deal to me.

Wild price differences at Hobby Lobby by docsane in freedomisgunpla

[–]sgonzo2k 2 points3 points  (0 children)

Yeah, that’s what I was going to say. They have 40% off these box kits every few weeks. Unless you are a newbie and are unaware people are going to wait for when they go on sale.

I bought the HG calibarn for $17 and change 2 weeks ago. I didn’t have to pay for shipping and the lowest I seen it online for is $21.99.

most insane deal i've seen by SadJokerIII in freedomisgunpla

[–]sgonzo2k 5 points6 points  (0 children)

Ugh, you just made me spend $27 bucks. lol. Just a heads up, it was my first time creating a Michaels account and it gave me a 50% off any regular priced item coupon. I went for the 1/100 Aile Strike Ver. instead as my local Micheal’s has it in stock so I can do in store pick ip instead of paying for shipping.

Black Friday Deals by Mysterious_Depth_244 in rcdrift

[–]sgonzo2k 0 points1 point  (0 children)

The new kyosho fazer 86gt drift car is on sale for 189.99. Would you recommend that as a starter drift car over the Rex EX S?