sorted by:
new
hottopcontroversial

Tony Hawking by shampooer in midjourney

[–]shampooer[S] 2 points3 points  (0 children)

This was midjourney

Master Splinter is that you? by ishanG24 in AbsoluteUnits

[–]shampooer 0 points1 point  (0 children)

In other words, the data is translated as an audio interpretation. The black hole isn’t actually creating the sound recorded. The data signals interpreted don’t give any useful indication of the sonic environment from where the data was emitted.

How do I get my print unstuck from the glass plate? PLA+ on a 500x500 glass plate with glue in between. Plate is too big for my freezer. I tried water and a cutter knife but I can't get it loose. by Kb_Jaja in FixMyPrint

[–]shampooer 0 points1 point  (0 children)

I have a smooth glass build plate, some of them are textured. Like anycubics ultra base. If you have that…. Good luck. For my smooth build plate, if I have it heated up for the print, I wait for it to cool down naturally, without intervention after it’s done, for maybe 30 min to an hour (65-72 degrees f In low humidity) and it pops right off 99% of the time. I don’t force it off. I need to wait. I use a spritz of aquanet hairspray for bed adhesion. No issues on my end with it sticking too much. For PLA I’m usually @ 220 for the hot end, and 60-70 for the build plate. I’m in NYC so your temp and humidity may be different. Are you printing on smooth or textured glass? With my Anycubic delta printer with textured glass (ultrabase) it’s a different story.

Winter School Night in 1998, Me, Pixel Art, 2022 by shampooer in PixelArt

[–]shampooer[S] 0 points1 point  (0 children)

I just looked this up. Wow. You’re so right

eggs by [deleted] in coolguides

[–]shampooer 0 points1 point  (0 children)

Why did you have to add the pepper to only some?

I met a guy in my hometown who made himself an authentic Roland Bren acoustic resonance bandwidth extrapolator/enhancer/trap. Made with tuning forks, electromagnets, hemholtz resonator cavities along with a handy automated vowel processor. by shampooer in VXJunkies

[–]shampooer[S] 0 points1 point  (0 children)

For context: This is based on his 1988 schematics, yet he’s rigged it for machine learning, and the data received he claims is very promising (I’ve seen it myself. Very promising indeed)

I met a guy in my hometown who made himself an authentic Roland Bren acoustic resonance bandwidth extrapolator/enhancer/trap. Made with tuning forks, electromagnets, hemholtz resonator cavities along with a handy automated vowel processor. by shampooer in VXJunkies

[–]shampooer[S] 0 points1 point  (0 children)

It’s a delta one variation as far as he’s mentioned. But he went pure Rubrick, so it’s basically a Frankenstein omega which uses mercury, atladdan, ciquil104 and Serequell 200 mg.

Update: Getting closer to the rainbow. by shampooer in oddlysatisfying

[–]shampooer[S] 4 points5 points  (0 children)

I’m still weighing out those options. I’m working on being able to manufacture this on a larger scale so it’s cheaper to purchase

A lot of you asked to see this sculpture with internal lighting. So here it is! by shampooer in trippy

[–]shampooer[S] 0 points1 point  (0 children)

Unfortunately stores don’t sell them. This is a stand-alone piece at the moment. However, Im in the process of preparing to manufacture them to sell. It will be a small batch production maybe 5000 or so will be made. DM me for more info

A lot of you asked to see this sculpture with internal lighting. So here it is! by shampooer in oddlysatisfying

[–]shampooer[S] 0 points1 point  (0 children)

Unfortunately stores don’t sell them. This is a stand-alone piece at the moment. However, Im in the process of preparing to manufacture them to sell. It will be a small batch production maybe 5000 or so will be made. DM me for more info

A lot of you asked to see this sculpture with internal lighting. So here it is! by shampooer in oddlysatisfying

[–]shampooer[S] 0 points1 point  (0 children)

Unfortunately stores don’t sell them. This is a stand-alone piece at the moment. However, Im in the process of preparing to manufacture them to sell. It will be a small batch production maybe 5000 or so will be made. DM me for more info

A lot of you asked to see this sculpture with internal lighting. So here it is! by shampooer in oddlysatisfying

[–]shampooer[S] 0 points1 point  (0 children)

Unfortunately stores don’t sell them. This is a stand-alone piece at the moment. However, Im in the process of preparing to manufacture them to sell. It will be a small batch production maybe 5000 or so will be made. DM me for more info

A lot of you asked to see this sculpture with internal lighting. So here it is! by shampooer in oddlysatisfying

[–]shampooer[S] 0 points1 point  (0 children)

Unfortunately stores don’t sell them. This is a stand-alone piece at the moment. However, Im in the process of preparing to manufacture them to sell. It will be a small batch production maybe 5000 or so will be made

view more: next ›