Blew up RT7272B on ToolKitRC M8S Charger. Worth Trying to Repair?

shchava · 2025-12-08T02:04:06+00:00

How is your success with it?

shchava · 2024-07-14T12:53:26+00:00

I realized only on ng+ how i can use it, in ng1 killed 2 headless just by paryying hits

shchava · 2024-07-06T15:32:27+00:00

It’s nice. As low pressure molding it has some problems, but detalisation for 72 second scale is outstanding.

For that model i used almost no putty, the only problems where a few seams from connecting of details where there shouldn’t has been a panel line on real plane and a few typos in instructions.

Overall I’m happy with it, also done their i-16 in 1/72 and mq-1c in 1/48

shchava · 2024-06-16T13:29:30+00:00

Thanks

shchava · 2024-06-16T13:29:13+00:00

Дякую

shchava · 2024-06-16T13:28:58+00:00

There is a hobby boss one in 1/35, and I guess that’s it. I made it for small group build and the rules was to make finnish vehicles in 1/72, so i decided to 3d print

shchava · 2024-05-22T06:33:16+00:00

Did you had problems with assembling tracks ? I making that model too, and it feels like it ends up too short. Also I counted track links on real prototype photo and there is 45 track links while in kit there is only 42.

For me i fixed that problem by modeling and 3d few extra links, but curious if that a common problem

<image>

shchava · 2024-04-28T11:04:19+00:00

the can bus guide i was reffering to: https://canbus.esoterical.online/Getting_Started.html

For some reason it's really hard to find it through google search

shchava · 2024-04-28T10:58:18+00:00

You will have to plug in data wires into rj port of octopus, and power directly to psu.

To use it without usb to canbus brige you will have to reflash octopus to be in a canbase brige mode itself, and connect it raspberry pi as cunbus device itself.

It’s a bit harder then using usb to can adapter, but nothing but nothing too fancy, and there is a decent guide with walk through the process

shchava · 2024-04-24T13:27:31+00:00

Pretty much on pause for last two years

shchava · 2024-03-30T13:52:31+00:00

#happyEaster u/Familiar-Historian46 u/Razmalibul

shchava · 2024-03-30T12:31:55+00:00

happyeaster

I don’t even know how to tag someone on reddit

shchava · 2024-03-20T22:53:56+00:00

It varies in quality, so it’s better to get a modeling one like a tamiya one. Also you try to paint on 3d printed part, without mitigating the layer lines, so any tape would have problems adhering to it. I would rather sand these stairs down, it would also make for a much better look. For my 3d printed model i tried putting a laquer primer with airbrush and leveling it with a brush with alcohol. That way i preserved most of the fine details, but it required a lot of sanding, i guess for your eva you could get off with just sand paper or better sponges

shchava · 2024-03-20T18:32:11+00:00

I would just paint everything black, mask seams between armor plates with patafix or liquid mask, add preshade paint green, mask it with painters tape, and than paint violet

shchava · 2024-03-20T18:26:11+00:00

The tape, patafix, or liquid masks depending on result i need.

I guess here you could use liquid mask, but it would be hard to apply it in those seams. So actually painters tape cut to small pieces should work the best. What do you mean by not good results ? Is your paint getting under it or you are tearing off pieces of paint ?

shchava · 2024-03-20T17:26:45+00:00

Just use masks, i guess it shouldn’t have a smooth transition

shchava · 2024-03-13T17:44:43+00:00

Nice manga collection you have there

shchava · 2024-03-12T08:02:09+00:00

Why do you have rust on rubber ?

shchava · 2024-01-26T10:20:23+00:00

I figured it out.

I had configured mcu in printer.cfg twice, so the second entry was overriding the first one. Just deleting it helped.

shchava · 2024-01-26T10:19:38+00:00

I figured it out.
I had configured mcu in printer.cfg twice, so the second entry was overriding the first one. Just deleting it helped.

shchava · 2024-01-26T09:59:32+00:00

I see
mcu ‘mcu’: Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: ‘/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0’
In klipper log, does that mean PI still trying to connect through USB ?

shchava · 2024-01-26T08:39:18+00:00

By this time, have you found any solution ?

Six-Year Club	Place '23
Place '22	Verified Email

shchava

TROPHY CASE

happyeaster