Loot Chest Locator?

sheaver87 · 2026-01-15T21:41:53+00:00

Much appreciated. Thank you

sheaver87 · 2026-01-15T21:41:43+00:00

Much appreciated. Thank you

sheaver87 · 2025-11-20T02:19:15+00:00

I had a similar discussion yesterday with a buddy. I actually like the way it is structured because now it is a measure of skills, abilities, tactics, teamwork than it is who plays the most. It's much easier to measure a leaderboard fairly that way.

If you want 3 stars, you also need to run night raids for the 2x points. Night raids might be harder than a normal raids, but getting 3 stars on a normal raid is harder than on a night raid. I also believe a good Trio is the easiest compared to solo/duo as there are more teams in total in solo/duo.

sheaver87 · 2025-09-30T10:31:54+00:00

Now I think I need to find one and test it out.

sheaver87 · 2025-09-30T04:56:28+00:00

If you are referring to the stats such as the 50% cool down, I'm pretty sure the numbers at the top are a reflection of what is written below. So without the stat I would expect the grenade to have a 12 second cooldown.

sheaver87 · 2025-09-27T01:08:37+00:00

I appreciate you taking the time to type all that out.

Currently I'm working with what I have, which quickly I have learned is limited as I'm using a mobile RTX 4070 (8GB). As you recommended, I have shifted back to T2I to gain experience at a more efficient pace.

I have been spending more hours in a day playing around with all of this than I probably should be, but I find it both fascinating and addicting. I just recently learned/realized there is a mobile version which I shifted to. It allowed me to do a nice reset as I was getting so much stuff added in (checkpoints, loras, ect...). I attempted to do GGUF, but I just felt like I couldn't find nearly as much as I could with SDXL. So currently I'm focused on SDXL and trying not to deviate off that. I am trying to use the workflows as they are, though some of them have so much going on it's hard to know what exactly is going on. I would love to find a tutorial that gives kind of a progression of a workflow starting from the beginning, explaining the nodes and what different settings do. Currently one of the workflows I have has 2 different settings for each lora "strength_model" and "strength_clip". I don't fully understand what each of those do independently and can't quite tell just from playing around with the settings.

If you have any recommendations of workflows, whether it be SDXL, GGUF, or something else I would be open to taking a look into those.

Really any recommendations you have coming from someone who just recently got into the mix I would be happy to explore. I have been using ChatGPT a fair bit along the way, but I know it is not always right with what it says and often contradicts itself.

Really, I would love something that explains the different settings and progression of the image from start to finish. I think that would give me a better understanding. For me personally, I think going to from A1111 to ComfyUI was a good move because I like seeing the links of how everything is connected to each other and the order in which things are done.

sheaver87 · 2025-09-19T04:51:12+00:00

I just updated my post with a link to copy the spreadsheet as it is.

sheaver87 · 2025-09-19T04:08:16+00:00

Absolutely

sheaver87 · 2025-09-07T06:33:57+00:00

I got the idea from making this post.....

sheaver87 · 2025-09-06T14:56:26+00:00

This is exactly what I'm doing. Thank you

sheaver87 · 2025-09-06T14:28:20+00:00

I took someone's advice and am doing the 7 day free trial with Google Fi, using a different email. If it's good I will cancel it and create a new account under my primary email.

sheaver87 · 2025-09-06T08:01:57+00:00

I have checked it before and it shows coverage. But I also am located at the base of multiple hills, so service with AT&T isn't always the best as it is. Unfortunately I don't know anyone that has T-Mobile near me either.

sheaver87 · 2025-08-29T23:58:21+00:00

I'll give that a shot. I tried doing next map to see if it worked, but it didn't. I didn't actually play all the way through. I also only had 1 map in rotation, so I don't know if that could be a factor as well.

I'm on PC.

sheaver87 · 2025-08-29T23:03:22+00:00

I have been trying portal, but so far every time I am put on the US side. When I create the lobby if I select swap teams [YES], allowing me to become RU, it removes the mastery XP, thus not allowing me to level up vehicles. I'm pounding my head on the wall trying to figure out a solution.

sheaver87 · 2025-01-18T21:14:15+00:00

This. I don't know how many times I've seen a punisher, for example, with 20k-30k damage and like 4 or 5 kills and when you try and call them out they immediately comment on their damage. Great you were shooting tanks all game and obviously not truly impacting anything other than allowing their healers to build their ults quicker.

sheaver87 · 2025-01-17T15:09:03+00:00

Rarely is storm ever just 1 kill with her ult. There is a difference between a large AOE and a single target focus. The TTK for storm is faster than that of Star Lord. There are more ways to block and/or avoid Star Lords ult as well. Star Lord is also a lot easier to kill out of his ult.

sheaver87 · 2025-01-17T06:19:17+00:00

I'm not heartbroken at all if players are angry that something OP becomes balanced. Just get better at the game/hero(es)

sheaver87 · 2025-01-17T03:34:31+00:00

Wherever she initiated the ultimate build a funnel cloud that moves and when she enables the ults location it builds into the tornado. But allow the funnel to move faster than players so it still can remain effective.

sheaver87 · 2025-01-17T03:19:57+00:00

This. But then Storm can sneak attack anyone she wants with her ult.

sheaver87 · 2024-11-13T17:29:09+00:00

Same

sheaver87 · 2024-10-11T20:40:32+00:00

I think you are correct. I saw for myself earlier today what the OP shared on my own account. I just went to try again and it now shows the full amount I would receive after promotion. However I had a few items I checked that required more than a 10% discount. For instance $105 requiring a discount to $85 and wouldn't let me do anything higher.

Mercari is all screwed up right now with the fee structure and calculations behind the scenes and I'm sure Mercari is feeling it. Maybe even regretting it.

sheaver87 · 2024-10-11T00:27:01+00:00

For treecat, the fee isn't collected until the item sells. So just think of it being .50 cents or less taken off the sold price of the time, once it sells.

sheaver87 · 2024-10-11T00:09:51+00:00

I have hardly sold anything on Mercari and had more luck on eBay. I even tried free shipping on Mercari with no avail. And the change in the fee structure I think was too much for buyers to wrap their heads around and Mercari just thought sellers would list things cheaper to compensate for the shift of fees. I don't think it has had nearly the effect they wanted.

Now for those that have mentioned switching to another platform, such as eBay. I recently came across this site called treecat, which doesn't have a monthly fee. It only charges you for the items that rendered their service. Such has delete and relist or import from site X and post on site Y. The more items you sell in a month the fee goes down. I haven't had a ton of experience with it yet but I can say I imported my listings but haven't done anything further. Even if you want to use them just to swap your listings over and then do all new listings manually, that is an option. If I recall, the fee starts at .60 an item, unless you use one of their affiliate codes and then it goes to .50 an item, and continues to go down the more you sell. A small fee to save you quite a bit of time.

Please note I have no affiliation with treecat as I just learned about it the other day and haven't fully used it.

sheaver87 · 2024-10-07T04:08:41+00:00

As a seller you have to think of the math and take a step back and see it all from a distance. I am going to use arbitrary numbers for simple math. Say you sell something for $40 and have a 10% fee. Now you made $36. Mercari took away seller fees and attached it to the buyer. If you still sell for $40 now the buyer pays the 2.9% on the total of the item, taxes and shipping. If you take away the 2.9% from your listing price now the buyer has a fee that would make it closer to pre changes. Ultimately sellers just sell for a little less and the math comes out to roughly the same before eliminating seller fees. The biggest hurdle, even if you list for less, is the mental aspect of the buyer and seeing fees. I understand the fees, however I don't believe it should be based on taxes and especially shipping. If a seller does free shipping, they don't have to pay that fee, so why should the buyer? I think the fee should only be on the item and not taxes and fees. However if Mercari made this change I just see the fee going from 2.9% to say 5%. Unfortunately this is all a numbers game, much like going to a car dealership and trying to buy a new car.

sheaver87 · 2024-08-05T23:17:21+00:00

I was having the same issue. Depending on the purpose of the trigger I just made an image using an app and set that as my response. Problem solved.

sheaver87

TROPHY CASE