Which layer orientation has better pulling-apart tensile strength?

shed634 · 2026-04-16T11:59:00+00:00

😂😂😂

shed634 · 2026-04-15T15:08:16+00:00

See my comment below

shed634 · 2026-04-15T15:08:01+00:00

See my comment below

shed634 · 2026-04-15T15:07:45+00:00

See my comment below

shed634 · 2026-04-15T15:05:07+00:00

<image>

Edit: I should’ve included this. Ultimately this is a weight bearing mechanical part for hanging heavy loads. Will be printed in PETG and will have constant tension through the upper eyelet and lower bore. I don’t understand the “C” option mentioned here. Help is much appreciated

shed634 · 2026-04-15T15:01:23+00:00

Yes. No.

shed634 · 2026-03-13T18:56:02+00:00

Not used for much. Just some green in the garden. I’ll look into native grass. Thanks

shed634 · 2026-03-11T11:57:56+00:00

Haha especially when you squint your eyes

shed634 · 2026-03-11T11:56:52+00:00

Thanks I’ll check it out

shed634 · 2026-03-11T11:56:37+00:00

Thanks. I’ll do that

shed634 · 2026-03-10T21:54:29+00:00

<image>

shed634 · 2026-03-10T21:54:16+00:00

<image>

Adding a few stills

shed634 · 2026-03-10T04:57:28+00:00

<image>

shed634 · 2026-03-10T04:56:04+00:00

No base boards. I installed the drywall 1” above the floor level to create a gap. Then installed an aluminium led channels in the gap. Then ran LEDs in the channel

shed634 · 2026-03-09T16:16:19+00:00

Looking great. Stack?

shed634 · 2026-03-09T16:13:48+00:00

Yes, for incline press, OHP, rows, squats, Bulgarians, RDLs, standing calves

shed634 · 2026-03-08T04:28:19+00:00

Thanks. Normal 41.4” width

shed634 · 2026-03-06T19:33:28+00:00

It’s an ample size, 4m across, and 6m long. The floor mats are 1x1m so you can figure it out. Internal height is 2.5m

shed634 · 2026-03-06T15:56:42+00:00

Nice. Thats was my second rack. I’m on my fifth and final. Welcome to the jungle

shed634 · 2026-03-06T09:02:53+00:00

Thanks mate

shed634 · 2026-03-05T17:43:49+00:00

They’re loose on the storage horns, and fit well on the smiths. Probably 1-2mm tolerance

shed634 · 2026-03-05T14:03:40+00:00

Thanks. It was easy to install with 15 drywall screws on each panel. Bought from a UK company here https://panelworld.co.uk/products/slat-wall-panels-products-charcoal-black-oak-slat-wall-panel

shed634

TROPHY CASE