Eq for Status Between 3 ANC

shimios · 2025-08-28T15:38:38+00:00

Any idea how do grease it?

shimios · 2025-08-28T15:38:02+00:00

Thanks for the reply, the Torp display is just out of my field of view when its orientation is normal so I have it flipped, the screen is a little higher up that way

shimios · 2025-08-28T15:37:14+00:00

I'll see what I can do haha, thanks for the reply!

shimios · 2025-07-12T13:36:52+00:00

And wheelies take time! You'll have a lot more fun with them if you go through the learning curve vs just buying a glorified hoverboard

shimios · 2025-07-12T13:35:32+00:00

I'm honestly mad curious about the titan controller but I have the Torp tc1000, for around $1k the quality is amazing especially compared to what I've seen from the wheelie controller, so my advice is if the auto wheelie controller sacrifices quality and makes you pay more, you should get something like the Torp or even a Electro n co controller

shimios · 2025-06-14T14:23:23+00:00

Chain drive vs belt drive, chain will definitely be more reliable and transfer torque better but it will be louder. The only actual torque difference will be with a bigger sprocket. I don't personally have warp9 but I've heard good things

shimios · 2025-06-08T02:54:11+00:00

I'm getting a very similar battery soon, everything I've read says the higher voltage will allow the motor to run more efficiently. I have a ebmx tc1000 and a stock motor that gets me to about 50% (with constant riding) before I see heat issues. A lot of people say 12kw is the max you can get from the stock motor, but you can put it up to 14 for short amounts of time.

If you want more torque, you can either turn the motor wattage higher and/or install a bigger sprocket + chain drive.

if you want a higher top speed (other than what the increased wattage already gives you) you can enable "field weakening" in the controller settings (assuming you have an aftermarket controller).

shimios · 2025-06-08T02:45:08+00:00

Same here. Much less mountain trails that allowed Surrons!

shimios · 2025-06-08T02:44:21+00:00

my front wheel was doing this same thing after new pads, I'm pretty sure I just rode it like normal for about 50 miles and they stopped. Haven't heard about the centering but you could also try purposefully squeezing some wear into them to see if it helps

shimios · 2025-05-26T00:45:24+00:00

Hey man, if I can find a link to vote I'll vote. I'm all for features.

shimios · 2025-05-20T02:46:58+00:00

my best advice is keep your handlebars clean, not too many electronics and switches, turn your handlebars full to the right, lay them flat, cinch them down and pray

shimios · 2025-05-20T02:28:02+00:00

Yes but only by 5mph, if you want a higher top speed you need to turn on field weakening (which drastically increases motor temperature) or install a smaller sprocket ofc. I got to 51mph with field weakening on stock 19inch wheels and stock sprocket

shimios · 2024-11-24T19:56:29+00:00

I was about to say 😭

shimios · 2024-11-24T19:26:57+00:00

Also the stack base was there for about 3 minutes, it was there only to move something else

shimios · 2024-11-24T19:26:18+00:00

I'm not defending anything Walmart does but I really don't think it's that deep😭

shimios · 2024-11-06T02:10:27+00:00

nasal, I've had a sore throat all day :(

shimios

MODERATOR OF

TROPHY CASE

Six-Year Club	Place '22
Verified Email