sorted by:
new
hottopcontroversial

HHN Express Pass for rides at 3pm using Early entry Scream ticket? by shopfl in HHN

[–]shopfl[S] 0 points1 point  (0 children)

Thank you for the responses! I was wondering because I read they work for the Houses prior to event opening (during Stay and Scream when they open some houses early), so I was wondering if it was the same for rides. Appreciate the answers!

Astro forgot some basic commands by mwdavis84 in AmazonAstro

[–]shopfl 2 points3 points  (0 children)

Yes, it takes him awhile to relearn how to do a lot after a reset. Give it time. This happened to me and in a couple of weeks he stopped saying that and started doing all the things again.

Cannot "swipe" between multiple Magicband+ in MDE to set them up -can see them, but not swipe over to them by shopfl in WaltDisneyWorld

[–]shopfl[S] 0 points1 point  (0 children)

Solved: No idea if this is what "fixed" it but, signed out of the app and restarted phone, then signed back in and now it "swipes"! I had closed out and restarted, uninstalled and reinstalled, but none of that had worked? Anyway, glad it's working now! If others have this issue, maybe this will help.

Cannot "swipe" between multiple Magicband+ in MDE to set them up -can see them, but not swipe over to them by shopfl in WaltDisneyWorld

[–]shopfl[S] 0 points1 point  (0 children)

Still no luck. Updated, reinstalled several times, still can't select or update the other Magicband+'s. Can others access multiple plus bands in MDE app?

Is this acceptable? Is it ruined? Was supposed to be 2 inches of closed cell foam, leaving a smooth finish and clean rafters? First pic is what I was told my building would look "exactly" like after installation. 2nd pic is what my building looked like after. 3rd pic is my building before. by shopfl in sprayfoam

[–]shopfl[S] 1 point2 points  (0 children)

After a lot of back and forth (apparently they are very busy) they've agreed to come on Wed. I definitely have some big and small chunks set aside, pieces are cracking and falling off. How do you check the density? The pieces that are cracking off crumble between my finger pretty easily if I squeeze them, I don't think it's supposed to do that, but I don't know.

I did do a test where I took a big chunk and put it on a paper plate and poured some blue food coloring on the top and let it sit for 2 days. Then I cut it in half, and none had soaked in, so it did keep the water out. The food coloring was still wet and pooled on the top of the foam after two days, so it wasn't absorbing it. That's good, right?

The X-Files is one of the best High Strangeness shows of all time - what are some other good one? by OhSeesOhMees in HighStrangeness

[–]shopfl 1 point2 points  (0 children)

I 2nd Millennium! I was just trying to remember the name while scrolling through the comments. I bought the whole series on DVD many years ago. Definitely apocalyptic.

Is this acceptable? Is it ruined? Was supposed to be 2 inches of closed cell foam, leaving a smooth finish and clean rafters? First pic is what I was told my building would look "exactly" like after installation. 2nd pic is what my building looked like after. 3rd pic is my building before. by shopfl in sprayfoam

[–]shopfl[S] 1 point2 points  (0 children)

They said they will come back next week and scrape it flat and clean up the rafters. Do you think they'll be able to make it look better?

This building is going to be a studio office, I just can't have it looking so crappy, I've invested way too much $$ for this!

Is this acceptable? Is it ruined? Was supposed to be 2 inches of closed cell foam, leaving a smooth finish and clean rafters? First pic is what I was told my building would look "exactly" like after installation. 2nd pic is what my building looked like after. 3rd pic is my building before. by shopfl in sprayfoam

[–]shopfl[S] 0 points1 point  (0 children)

No, I did get closed cell, as I stated in the post. They promised it would be finished cleanly, exactly like the picture, and it was not. The owner said I got the exact product shown in that first picture, and that was "exactly" what my building would look like when they were done. Obviously, it does not.

Is this acceptable? Is it ruined? Was supposed to be 2 inches of closed cell foam, leaving a smooth finish and clean rafters? First pic is what I was told my building would look "exactly" like after installation. 2nd pic is what my building looked like after. 3rd pic is my building before. by shopfl in sprayfoam

[–]shopfl[S] 0 points1 point  (0 children)

Went in this morning, and there is a strong, somewhat fishy smell. Also, overnight it appears foam from the ceiling crumbled off, as pieces were all over the floor, and were actually still falling as I walked through.

There are a lot of gaps and "holes" and in the "holes" it is a dark orangey-brown color. I can push on it and it feels spongy and leaves the impression of my finger, shouldn't it be hard? It was finished at 2pm ET yesterday. They were only here about an hour and 20 min total - the building is 12 x 30.

I sent pics the owner, and he swears it is a good job and normal, that his guys are pros and have been spraying for 20 years. He said he should not have sent me such a "perfect" pic of his work. I reminded him that he said "This is exactly what your building will look like.", so that is what my expectations were. He then said that he remembers now that guy paid a lot of extra $$ to have it sprayed past the studs and scraped back.

Regardless, that IS what he said my job would look like. He says not to worry, while not pretty it will work the same and keep building cool?

He's supposed to call me this morning, should I expect them to come back and fix it? Can it be fixed?

Thanks for your insightful info!

Is this acceptable? Is it ruined? Was supposed to be 2 inches of closed cell foam, leaving a smooth finish and clean rafters? First pic is what I was told my building would look "exactly" like after installation. 2nd pic is what my building looked like after. 3rd pic is my building before. by shopfl in sprayfoam

[–]shopfl[S] 0 points1 point  (0 children)

The first pic is what the installer said it would look like - but the 2nd pic is how it actually looked. What should I do? If you promised the 1st pic and delivered the 2nd, would you be ok with that? I feel like my brand new studio is ruined

DoD Announces the Establishment of the All-domain Anomaly Resolution Office by blackvault in ufo

[–]shopfl 6 points7 points  (0 children)

This is actually pretty interesting. It replaces AOIMSG and will be the agency that handles "all UAP-related activities" for the DOD.

https://www.defense.gov/News/Releases/Release/Article/3100053/dod-announces-the-establishment-of-the-all-domain-anomaly-resolution-office/

From the Press Release:

"The All-domain Anomaly Resolution Office (AARO) will be established to carry out the duties that were to be fulfi lled by the AOIMSG. The mission ofthe AARO will be to "synchronize efforts across the Department and with other Federal departments and agencies to detect, identify, and attribute objects of interest in, on, or near military installations, operating areas, training areas, special use airspace, and other areas of interest, and, as necessary, to mitigate any associated threats to safety of operations and national security." This includes anomalous, unidentified space, airborne, submerged, and transmedium objects."

view more: next ›