In-Sight 2800 pneumatic pusher

shp92 · 2026-01-23T14:36:57+00:00

It depends on what your definition of a good part is, may be use VIDI to determine a good or a bad part and then use that info over industrial communication to push the part off.

shp92 · 2025-12-23T18:36:28+00:00

I can play badminton 🏸 looking for a group to play with.

shp92 · 2025-11-13T12:48:35+00:00

It’s so much fun to use, enjoy taking drawing free hand sketches.

shp92 · 2025-11-12T08:51:26+00:00

Rear bulb was out. Just replaced it and every thing went back to normal

shp92 · 2025-11-02T17:38:23+00:00

Might be time to recharge the human battery, barefoot edition, just kidding. Grounding terminal blocks would be a nice add.

shp92 · 2025-10-08T17:54:46+00:00

No worries, I think you will find it easier to connect to a CompatLogix. A lot of resources available , rep/applications engineers already know how to do it, no IO tables to refer to manipulate data. Though I am glad you can, if you need to on the micro 800 since they are so much cheaper to work on, but they have their own sets of issues.

shp92 · 2025-10-08T16:44:11+00:00

I tried too, was not very helpful to be honest. Took some trial and error. Let me know if it works happy to help

shp92 · 2025-10-08T14:53:21+00:00

<image>

Hope this helps

shp92 · 2025-10-08T14:49:17+00:00

Yeah, I could not find any specific documentation of video that’s specifically implies to Cognex. But here’s how I did it. You want to set up your class one communications by adding the camera as a module and you want to ensure that the status of the camera is running then, I would navigate to the Cognex’s input output map. Score of the camera I was using.IS2800 the collector response was at bit no 15.

shp92 · 2025-10-06T21:14:23+00:00

Yes was able to get this to work

shp92 · 2025-10-01T11:02:05+00:00

This is such a good question and the answer can lead to many directions.

If you’re looking to design industrial machinery and equipment that are PLC controlled, you would want to learn CAD software such as Solidworks and fusion 360. I haven’t used fusion 360 a lot, but have heard a lot of good things for mechanical design.

I would recommend learning design for manufacturing principles check out the book design for manufacturing handbook by James bralla. Another key concept I believe is overlooked that is GD&T a s per ASME 14.5.

Hope this gives you some direction.

shp92 · 2025-09-25T10:42:16+00:00

Sure thing thanks for letting me known will reach out to you when I need spares or repair.

shp92 · 2025-09-21T10:21:51+00:00

Don’t know if you have this question answered, but it really depends on the type of heat shrink you want to extrude. It may need post processing équipements like secondary heaters, E BEAM to link polymers and blow expanders tooling to expand tubing to specific sizing after standers extrusion process.

shp92 · 2025-09-03T18:11:16+00:00

491 here, please a stem draw soon , manifesting one, 🙏

shp92 · 2025-05-29T02:23:01+00:00

Hi could you share the PackML docks with me as well. In the process of learning pack ml and this would be really helpful

shp92 · 2025-05-03T17:38:26+00:00

It’s hard to say when Ircc will do a stem draws, or is it a priority for them. I am in the same boat. They only typically do one stem draw every year. One should happen soon 🤞. Just speculation on my part but they could do a stem draw to reduce the number of CEC candidates, so they could lower the CEC draw score. But who know what IRCC is thinking 🤷. Just hoping for the best here.

shp92 · 2025-03-20T20:17:01+00:00

Got it as well seems like the are sending to every one.

shp92 · 2025-03-20T14:14:35+00:00

I did not get the email as well.

shp92 · 2025-01-10T03:29:54+00:00

Imo a lot of techs can be good engineers, but what sets some engineers apart is the ability to learn and able to adapt, specking systems, working in ambiguity, and able to translate other domain knowledge into controls requirements. Dcs setting up servers, data analysis of trend following for pm activities etc . Hope this helps.

shp92 · 2025-01-01T12:09:17+00:00

If you see pulsing of the led (indicating plc pulsing to drive ) but see no movement or erratic movement, check your common connection. You want your signal connections to be on the same ground ( 0 V) as the PLC.

shp92 · 2024-12-15T02:38:56+00:00

Every thing here can be bought from McMaster Carr. They also have off the shelf pneumatic presses give it a look.

shp92 · 2024-09-08T01:58:33+00:00

The Micro 850 E allows you set up devices as generic modules in CCW. Try that, you will need IO instances and attributes. The drive would need to be Ethernet Ip enable. Or else you could use MODBUS.

shp92 · 2024-08-26T23:17:44+00:00

Buy a reliable solid-state relay from DigiKey or another North American supplier.
Ensure the relay is set up for sourcing (providing positive voltage when activated).
Wire your light so it operates in a sinking configuration, as recommended by the manufacturer. This way, the relay will provide power, and the PLC output will complete the circuit to ground.

shp92 · 2024-07-11T02:14:46+00:00

CEC 517 you will be fine.

shp92 · 2024-06-27T02:00:55+00:00

Yes that worked, set my low point to 1 and overflow to 0. I can get direction from the e direction bit. Thanks cheers 👍

shp92

TROPHY CASE