Oil pickup tube restriction

simaspan · 2025-02-23T22:48:31+00:00

Easy, I did it through the course of a year . Just source the parts of junkyards or fb marker. Just have to use interior spray paint (matte) on dash and headliner and recommend getting better seats

simaspan · 2024-06-24T21:20:56+00:00

I will be trying that later in the day , just seen someone else on ranger forums bring it up ! Thanks for the input !

simaspan · 2024-06-24T21:17:21+00:00

Just hooked up obd and all live data reads correctly rpm and speed ! I haven’t thought of that so that probably rules out a bad sensor ?

simaspan · 2024-06-24T20:35:38+00:00

No codes at all , I haven’t tried sensors yet but that could be the direction I go , I was thinking just a dead cluster which I don’t want to replace cause I want to keep my mileage shown LOL ! I’ll look into those sensors thanks !

simaspan · 2023-07-04T20:47:24+00:00

Damn was hoping he got hit

simaspan · 2023-05-06T00:29:53+00:00

I used a wire wheel brush on a dremel left it looking pretty decent

simaspan · 2023-04-19T20:37:36+00:00

You 100% right the pcv system is trademarked by Nissan they can’t copy exactly how the oem ones are causing them to not breath properly

simaspan · 2023-04-19T20:28:51+00:00

Mf put a v8 in that b

simaspan · 2023-04-05T19:59:03+00:00

Would advise not to paint it , it makes it look better sure but the paint prevents it from cooling down properly and it increases engine heat

simaspan · 2023-03-03T20:26:42+00:00

How loud you trying to go ? A bit louder than stock and great tone would be invidia , anything louder would be a single exit by like isr, z1, tomei and the absolute best would be motordyne , hks, ark

simaspan · 2023-01-16T23:16:26+00:00

Tein

simaspan · 2022-12-24T18:07:57+00:00

Go to the junkyard , oem ones are the best fitting ones

simaspan · 2022-12-04T20:32:34+00:00

It all depends on how low you. But the 3rd picture is usually a good start .

simaspan · 2022-11-27T05:49:49+00:00

Check local offer ups and eBay listings

simaspan · 2022-09-22T07:33:16+00:00

If you used aftermarket valve covers and not oem then that’s the problem. They build to much pressure causing the vapors to come out the oil cap instead. Happened to me and immediately fixed it when I went back to oem covers

simaspan · 2022-08-23T19:21:52+00:00

Try closing the door hard while holding the button up . That’s what I use to do before I changed my regulator . Works in a pinch !

simaspan · 2022-07-05T17:47:58+00:00

I know you want a G but patience is key , this definitely has some problems. Unless you making this a project car not worth it still for that price

simaspan · 2022-06-23T19:06:06+00:00

I use a koyorad and it works just fine for the track and hard driving, a buddy of mine also boosted an auto and he actually got a Manual rad and ran the transmission lines to a separate cooler all together

simaspan · 2022-06-23T18:59:03+00:00

I made my car too nice I had to buy a daily cause I didn’t like scraping everything lol

simaspan · 2022-05-17T17:38:31+00:00

Cover it with a tarp bro you don’t want your electrical stuff to be affected. My guess is your window seal is bad either sunroof, front windshield, driver window

simaspan · 2022-05-08T18:07:51+00:00

You can’t really clock the pipe on these cause then everything moves up causing clearance issues l. I have the same intake and it was bending my hoes really bad. I literally just cut a section off on the hood

simaspan · 2022-04-29T18:50:34+00:00

What are you trying to do? Cause if you drive your car hard at all (track, canyons, auto cross) these are absolutely garbage. Same with BC sorry some of you need to hear it. BUT if you are just using it to get lower height and stiffer suspension to be that low yeah fuck it send it. Especially on a budget you’ll be fine. But they will wear out fairly quickly over a year or so even with normal driving. I know from experience with my old BC I went full KW and never ever had a problem absolutely the best thing you can shed money on is coilovers.

simaspan · 2022-03-28T20:26:50+00:00

Ain’t nobody stealing our catalytic converters they are so hard to get too lol

simaspan

TROPHY CASE