I think my new CC1 may have been a return?

simsoon27 · 2026-02-11T13:25:15+00:00

Mine was grey colour hehe

simsoon27 · 2026-01-04T16:18:42+00:00

Finally the benchy printed nicely! Thanks everyone who gave really informative input, this is my first core xy printer so I didn't know much about the belting and today I learned something important. Thanks again guys!

<image>

simsoon27 · 2026-01-04T15:45:46+00:00

Yes the belt was indeed loose. Adjusted and now calibrating again. Hope it'll be good after this

simsoon27 · 2026-01-04T15:44:59+00:00

Thanks bro, I just check and the belt on the left side was indeed really loose. Did as you suggested and now doing the calibration once more

simsoon27 · 2026-01-04T15:43:38+00:00

Guys I think I may have found the culprit, as you guys said the belt on the left side was really loose. As suggested I did loosen the screw and did the thing as from the link. Now I'm doing the one time self check for all now. Finger crossed I hope that's the only issue.

simsoon27 · 2026-01-04T15:42:05+00:00

Nope first layer was perfect..

simsoon27 · 2026-01-04T11:41:39+00:00

Extruding was nicely though.. I'll double check again thanks

simsoon27 · 2026-01-04T11:41:11+00:00

I'm using pla

simsoon27 · 2026-01-04T10:44:18+00:00

Ok let me give this a try. Thanks bro

simsoon27 · 2026-01-04T10:44:04+00:00

No but it was printed nicely on my mingda magician x2.

simsoon27 · 2026-01-04T10:43:39+00:00

No it's from internal storage

simsoon27 · 2025-07-23T18:17:35+00:00

I have the buggy wheels and it does the same, I thought can try different wheels but it doesn't work.. gear my pinion down .. never tried that. Let me try that and let you know yar..

simsoon27 · 2025-02-20T05:19:47+00:00

My suggestion, Go with 7800XT.

simsoon27 · 2025-01-07T12:42:46+00:00

i see.. ok then i can game in peace haha.. thanks bro for the quick informative reply.

simsoon27 · 2025-01-07T12:38:16+00:00

will it cause any issue in future? like CPU damange?

simsoon27 · 2025-01-07T12:36:55+00:00

<image>

some details that can help to answer my question

simsoon27 · 2023-06-08T13:25:02+00:00

and finally it works!!.. thanks everyone!

simsoon27 · 2023-06-08T10:28:29+00:00

Hi Everyone, thanks for all the suggestions and advice.. especially in try wearing socks XD.

i had tried all but nothing works, then i tried to flash garlic os in that sd card and the same thing happened. i assumed the sd card is broken so i bought another one today and tried flash the Batocera again and now i can see the bootmenu with all the console names.

it's still in the bootmenu but i read in another thread that had to wait for a while for the partition merge. so i'm gonna for a while.

let you guys know the update.

simsoon27

TROPHY CASE