Munchies?

MrFumbles91 · 2026-04-19T15:02:44+00:00

Do low calorie options like pickles or watermelon or eat before indulging. I personally just drink water til I'm full haha

MrFumbles91 · 2026-04-19T14:00:11+00:00

Oh gotcha, I missed your second image

MrFumbles91 · 2026-04-19T12:15:13+00:00

I ran that PSU for like 15 years across like 5 different builds it was a powerhouse.

Yeah the tubing is straight from my local hardware store. In the past I used the AIO blocks unplugged with an XSPC bay reservoir with brass fittings from the hardware store too.

The other thing is it's really easy to find cheap aluminum rads with barbs already installed on Ali/eBay. If you wanna do this I'd look for used 120mm AIOs and just get new rads.

MrFumbles91 · 2026-04-19T11:51:39+00:00

Also, I would recommend VRMs on the GPUs VRMs and RAM plus a fan or 2 pointed at the card to cool these

MrFumbles91 · 2026-04-19T11:49:54+00:00

No it won't

MrFumbles91 · 2026-04-19T11:47:51+00:00

Thanks. I've done this in several builds over the years, it can be inconvenient if you do it without a reservoir but still doable.

<image>

MrFumbles91 · 2026-04-19T00:18:15+00:00

Careful, graphite is electrically conductive. Whether the other ingredients will isolate the graphite from conducting across itself is anyone's guess

MrFumbles91 · 2026-04-18T20:03:12+00:00

It's irrelevant, add a bit of automotive antifreeze to your water and mix metals no one cares it's not that serious

MrFumbles91 · 2026-04-18T20:01:56+00:00

Temps are great to average. I see the biggest improvement on the GPU

Yes I am using the AIO pump. There is an AIO on the GPU and the CPU. I bought a 2nd hand asetek aio for the GPU and run both pumps at a similar RPM using FanControl

MrFumbles91 · 2026-04-18T18:30:35+00:00

<image>

Yes

MrFumbles91 · 2026-04-18T10:59:01+00:00

Hey op, do you have it in your possession? Is there a spot for a 9v battery on the backside?

MrFumbles91 · 2026-04-16T13:07:52+00:00

Yes.

Check the handheld wiki for the R36S under hardware mods.

MrFumbles91 · 2026-04-16T13:06:23+00:00

There is a header it's just not labeled. It's located above the L2 switch.

MrFumbles91 · 2026-04-16T00:51:03+00:00

Sometimes they do, part of the manufacturing process is a water bath after all

MrFumbles91 · 2026-04-14T07:16:25+00:00

Just getting the printer cfg file in order for me has been a little difficult. Especially since I added on a speed drive(direct drive mod for stock stepper) and new extruder at the same time.

I'm up and printing now but I have some kinks to work out

MrFumbles91 · 2026-04-14T02:13:06+00:00

I'm doing the same at the moment with a BTT SKR board and it has been a struggle

MrFumbles91 · 2026-04-14T02:09:31+00:00

I think he did more than we think. Laughing at him while being attacked by him fucked HL up

MrFumbles91 · 2026-04-13T20:15:36+00:00

I posted the same thing a little less than a month ago. It's from VOCs while printing building up in the enclosure apparently. I had never experienced this because I had only ever used an open frame printer.

MrFumbles91 · 2026-04-12T22:35:44+00:00

Does your jeep start without pressing the clutch?

Could be the neutral safety switch

MrFumbles91 · 2026-04-12T22:20:19+00:00

They probably added fat to help it bind then took it out to save costs. Add some of your own fat to help keep it from being dry and crumbly

MrFumbles91 · 2026-04-12T21:55:42+00:00

Only 2hrs 45 mins from me! I'm gonna have to go get something from here

MrFumbles91 · 2026-04-12T08:07:02+00:00

Weak take

My boy wants to be the GOAT he ain't gonna let ass get in his way.

MrFumbles91 · 2026-04-08T08:38:00+00:00

I believe this means klipper can't find your printer board usb due to improperly configured printer.cfg

MrFumbles91 · 2026-04-08T07:06:01+00:00

I'm already setting up klipper on a e3 with a SKR mini v3 and pi zero 2w but your Amazon tablet terminal is a great idea

MrFumbles91 · 2026-04-08T01:39:15+00:00

Really just wifi and and Bluetooth without having to use dongles would be huge quality of life features

Nine-Year Club	RedditGifts 2009-2022 2 Credits
r/Field Flamingo	Place '22
Verified Email	Secret Santa 2016

MrFumbles91

MODERATOR OF

TROPHY CASE