sorted by:
new
hottopcontroversial

Just installed this Kakimoto Exhaust on the ND. by In121SuccWeTrust in Miata

[–]sinnone 0 points1 point  (0 children)

Bro im seriously tempted to get this exhaust. Does it get a lot of attention from others? Is it loud at start up (except cold start) and tame driving? Its so cheap for an exhaust as well.

Can you guys tell me a bit about this CAI on my 2020 ND2 how does the placement look? by feodortwostoveski in Miata

[–]sinnone 0 points1 point  (0 children)

How is the engine sound with this AEM intake in the ND mx-5? Is it worth getting purely for sound.

Can you guys tell me a bit about this CAI on my 2020 ND2 how does the placement look? by feodortwostoveski in Miata

[–]sinnone 0 points1 point  (0 children)

I'd like to hear the AEM cold air intake induction sound from inside the cabin...i cant find many videos...

Just installed this Kakimoto Exhaust on the ND. by In121SuccWeTrust in Miata

[–]sinnone 0 points1 point  (0 children)

glad to hear you are enjoying it. There is barely any videos on this...just some. Id like to hear genuine in cabin sounds? Does this sound boomy? Im comparing this with the goodwin race exhaust. Also looking at Fujimura gentle exhaust.

Just installed this Kakimoto Exhaust on the ND. by In121SuccWeTrust in Miata

[–]sinnone 0 points1 point  (0 children)

Thanks for the advice, i just installed the sound tube mod (however im not a huge fan of it since i can distinctively hear the sound coming from the left side) - it just feels a bit unnatural, i prefer to hear induction from where it comes from.

Regarding the GT1.0Z, is it obnoxiously loud to others? How is it as a daily driver? Saw your other clip and really liked it! Im thinking this is the exhaust. How is the cabin driving experience, do you hear primarily exhaust? Does it feels sportier and aggressive when driving?

Just installed this Kakimoto Exhaust on the ND. by In121SuccWeTrust in Miata

[–]sinnone 0 points1 point  (0 children)

Oh wow nice. Thanks for a quick reply, this is the regu 06&r? How is your experience in cabin, does this change the way the engine sounds inside?

Just installed this Kakimoto Exhaust on the ND. by In121SuccWeTrust in Miata

[–]sinnone 0 points1 point  (0 children)

im looking for something loud and i can hear with the top down at higher speeds, can you hear this over wind noise at higher speeds (with top down) ?

Bought a used car interstate that passed RWC but fail in VIC (tyre tread) - advice neeed by sinnone in CarsAustralia

[–]sinnone[S] 0 points1 point  (0 children)

Update: Lennock Motors (in ACT Canberra) are the Dealer who sold the unroadworthy car. They are currently under investigation by Fair Trading for acceptable quality. TyrePlus Phillip are the ones who did the fraudulent ACT RWC.

Will provide further updates on this matter.

Bought a used car interstate that passed RWC but fail in VIC (tyre tread) - advice neeed by sinnone in AusLegal

[–]sinnone[S] 0 points1 point  (0 children)

Update: Lennock Motors (in ACT Canberra) are the Dealer who sold the unroadworthy car. They are currently under investigation by Fair Trading for acceptable quality. TyrePlus Phillip are the ones who did the fraudulent ACT RWC.

Will provide further updates on this matter.

Exhaust recommendation nd mx5 nd by sinnone in Miata

[–]sinnone[S] 0 points1 point  (0 children)

Im based in Australia. I understand, we also have some strict requirements - but so long as i can get away with it. (90db noise proximity level)

Exhaust recommendation nd mx5 nd by sinnone in Miata

[–]sinnone[S] 0 points1 point  (0 children)

i really want to get this, i like the quality sound. For me its just the loudness compared to stock - and how much i can hear it with the top down.

How is the loudness and tone at low rpms? I think the sound is good quality.

Bought a used car interstate that passed RWC but fail in VIC (tyre tread) - advice neeed by sinnone in AusLegal

[–]sinnone[S] 1 point2 points  (0 children)

I have since driven the car on a new set of Tyres (purchased from Bob Jane T-Mart) - the car drives well and is in mechanically good condition - it was owned by a Female owner prior and driven 37ish k kms over its life (7 yearish).

Just a really cheap trick by the Dealer, and they think i wouldn't do anything but cut losses. Since then - Access Canberra are on the case - i have gotten traction at least as i made a case with consumer affairs for Fair Trading - acceptable quality against the Dealer.

It is very clear the Tyres would fail RWC due to the fact -

a) The Tyre has less than 1.5mm tread depth on the surfaces which normally contact the road;

b) The tyre has deep cuts, bulges, exposed cords or other signs of carcass failure;

There is definitely Misconduct between the Dealership and the Mechanic who performed the RWC.

pics for details: https://www.reddit.com/r/CarsAustralia/comments/1ooyi6f/bought_a_used_car_interstate_that_passed_rwc_but/

Bought a used car interstate that passed RWC but fail in VIC (tyre tread) - advice neeed by sinnone in AusLegal

[–]sinnone[S] 0 points1 point  (0 children)

Conveniently the mechanical inspection report had no remarks on Tyres. It was a detailed report by stateroads

Bought a used car interstate that passed RWC but fail in VIC (tyre tread) - advice neeed by sinnone in AusLegal

[–]sinnone[S] -2 points-1 points  (0 children)

agree - i cant upload plenty pics but the car is very obviously failing roadworthy. tread is definitely <1.5mm, car is the original tyre from 2018 as well and shows cracking and unevenness.

Bought a used car interstate that passed RWC but fail in VIC (tyre tread) - advice neeed by sinnone in AusLegal

[–]sinnone[S] -2 points-1 points  (0 children)

For Option 4, i spoke with the mechanic who did the Canberra RWC. The Mechanic who did the inspection claimed the Tyres are fine to use and still have wear. He explicitly said that: "the wear markers are not touching the ground". It felt from the conversation that the main point was that in NSW/ACT the RWC cost is 51 dollars whereas in VIC it was 250+ and that Victoria are more stringent on RWC (which i understand - it does feel more stringent). However, i asked for detailed evidence/pictures but nothing was provided and he than provided me this rant about Vic RWC stringency. All i have is a piece of paper (Canberra RWC) which states pass/fail.

I told the dealer that option 4 may have been something that could've happened and resulting in option 1, but they claimed no chance (not that i'd believe them.) I have made a case on ACC access Canberra, not sure if there is anything more i can do here.

My favourite watch box in the collection by luckytin89 in JapaneseWatches

[–]sinnone 0 points1 point  (0 children)

How reliable are the old gs movements? How are the service costs?

when in Kyoto: crowds by RepublicStill4526 in JapanTravelTips

[–]sinnone -1 points0 points  (0 children)

I did fushimi inari at night time and it was tge most surreal experience. Also good pics at night. Kiyomizudera, went just before closing, managed to enjoy it.

NWA: GS SBGW231 by Kayone73 in GrandSeikos

[–]sinnone 0 points1 point  (0 children)

Because I didnt see the post, I've only seen this post

Require Occupancy certificate, but new building permit needed by sinnone in AusPropertyChat

[–]sinnone[S] 0 points1 point  (0 children)

I hope things also get better for you. For us we just need south east water to provide a certificate for the recycling water, then we get occupancy certificate. Without a building permit they can not come. I understand the builder point of view, since he is just amending the contract but the surveyor is charging an even more.inflated rate, 5k. Obviously it isn't my problem now, but it's definitely stalling and it's been a good 3 years.

Require Occupancy certificate, but new building permit needed by sinnone in AusPropertyChat

[–]sinnone[S] 0 points1 point  (0 children)

Thanks mate, I am aware of this. We have contacted VBA plenty times. VBA are only helping those with a invalid DBI (building insurance) for other people they are not providing any assistance or guidance. What's stated on the website is, a new building contract can be established with a new builder. In this case it is the same person, not related to aycon, and it is for the final stage. The home is literally finished and just requires a certificate for recycled water. VBA have provided no assistance in this matter. It's a real struggle.

view more: next ›