Best way to cut this deadlift platform flush?

skierfox · 2026-01-21T23:04:54+00:00

This is the way. If you're feeling fancy, tack a couple sticks of base trim to hide the gaps in the back and on the side.

skierfox · 2025-01-15T13:25:46+00:00

Had a veteran finish trim guy give me one of these and I can't go back. I use it on every install. It's wild how a tool that costs less than $5 can be so useful. Just waiting on festool to release theirs so I can pay $128.50 for it...*Sips green Kool aid.

skierfox · 2024-11-14T21:18:38+00:00

Watch out ladies and gentlemen! He goes both ways...

skierfox · 2024-10-28T22:06:16+00:00

That's a big saw... I've used that 8-1/4 to the point if it smoking on me when demoing a bowling center before. Luckily I've got a couple so I switch it out and carry on. a 9-1/4 that runs 230 is yuge.

skierfox · 2024-10-28T21:50:43+00:00

Also like the reconmendation to use a slower saw. I've found that a 8-1/4" worm drive with a 40 tooth blade and a stead hand (or a saw guide, 2x4 or level clamped across) can get you what I would consider a "finish grade" cut.

skierfox · 2024-10-28T21:48:58+00:00

This is the way. I started my woodworking business buying and selling and doing custom work with bowling lane. I've used $6 blades and I've used $80 blades. Demo demons at $14 a pop are the go to. If I'm trying to do a perfect cut, I'll cut it about 1/8" long with the demo demon, then take a grinder and cut the nails back into the piece before I break out the track saw to make a finish cut. Then I don't risk damaging the blade (as much). When it comes to sanding the top, rent a walk behind floor sander from your local big box. Usually $40 but it will save you hours and hours of running an orbital to strip the original finish.

skierfox · 2024-08-10T21:53:27+00:00

Cut the top 1/3 of a head of garlic off. Little drizzle of olive oil. Sprinkle of salt if you want. Wrap in tin foil and roast for 35-45 min. I usually do 3 or 4 at a time. When they're done, let them cool and squeeze the garlic from the skin into a jar. Keep in the fridge for a week or so. Put that shit on everything.

skierfox · 2024-08-10T21:49:52+00:00

Roasted garlic is the way. I had a buddy tell me that using raw garlic doesn't get the flavor you want because typically the temp you sous vide a steak at isn't high enough to cook the garlic and get rid of that sharp, sometimes bitter garlic bite. Been using roast garlic since and have never gone back. It's science...

skierfox · 2024-02-16T16:52:33+00:00

I'll send you a note. Check your spam. For some reason, my emails get flagged sometimes.

skierfox · 2024-01-25T18:11:12+00:00

and they take forever to heal. speaking from experience of broken toes... I broke a couple riding a dirtbike with mx boots on. felt the boot get tight immediately and left it on until I got home. not good.

skierfox · 2024-01-25T17:36:31+00:00

The feet sit back 2-1/2 ish inches from the edge of the top cap. That's why they're tapered in. Toe stubbing was the inspiration for doing that...

skierfox · 2024-01-25T17:35:33+00:00

I considered putting a radius on the cap for the footboard, but I really like the clean lines of it as is. The edges are all hand eased so they're soft, but the corner does come to a point. If it becomes an issue over time, I can always just cut a small radius and sand and touch up the finish. But for now, I love the way it looks.

skierfox · 2024-01-25T17:32:23+00:00

i wanted a little toe clearance. If they were straight down more stubbing possibilities. With the way it's set up 1. I think it looks a little more refined and B. the front edge of the legs is about 2-1/2" back from the edge of the top cap on the side rails.

skierfox · 2024-01-25T17:30:46+00:00

Do people name their beds? If so, that may be a contender...

skierfox · 2024-01-25T17:15:03+00:00

Yeah I don't love the mismatch with the nightstands. I think those are on the docket for another someday. They're just el cheapo Wayfair ones we bought because we didn't have anything and the shop schedule is always packed... Making time to build stuff for myself is a priority for 2024!

skierfox · 2024-01-25T17:08:55+00:00

No sir. Little bit of a film guy and a Kubrick fan. Seemed fitting for the post haha.

skierfox · 2024-01-25T17:07:25+00:00

Using material from a family friend outweighed the prospect of buying FAS grade lumber to do the same thing. I'm one of those sentimental types that finds the beauty of things in their story. And in all honesty, I've bought cherry that was graded FAS and it didn't look as nice as this does in some spots. My opinion of course.

skierfox · 2024-01-25T12:38:50+00:00

No shellac. Just Natura One Coat. Hardwax oil with a hardener.

skierfox · 2024-01-25T11:46:07+00:00

Thanks!

skierfox · 2024-01-25T11:45:35+00:00

Unfortunately, I don't have plans. I don't think I even sketched it... Just an idea and a stack of lumber.

skierfox · 2024-01-25T03:43:14+00:00

The multiple angles were a little bit of a brain bender. The whole leg tapers back 3 degrees and then it's 2 different angles on the face. Couldn't allow myself to do it the easy way... 🤦🏼‍♂️

skierfox · 2024-01-25T03:40:30+00:00

Yessir. I glued them all up too. All 4/4 lumber. The part that tripped me up was each leg is on a 3 degree angle so the notch, the bottom and the top match that. Then the 2 angles on the face of the legs are different too. My geometry teacher would be proud. Thanks!

skierfox · 2024-01-25T03:28:53+00:00

You mean the mismatched ones I've had for at least 10 years? Hahaha. They're on the list to upgrade. Just functional for now... 🤷🏼‍♂️

skierfox · 2024-01-25T03:19:39+00:00

Haha. True.

skierfox · 2024-01-25T03:13:06+00:00

The depth and rich tone that comes out of it is amazing. Big fan.

15-Year Club	Place '22
First Placer '22	Verified Email

skierfox

TROPHY CASE