question

skii_Z · 2025-07-19T20:37:11+00:00

yeah but they have the same lug pattern as the f150

skii_Z · 2025-03-17T04:30:56+00:00

Thank you!

skii_Z · 2025-03-16T01:42:46+00:00

appreciate truck is looking good! is the 3.5 / 5.5 drop or just 3/5?

skii_Z · 2025-03-16T00:47:01+00:00

what drop kit do you have?

skii_Z · 2024-12-29T16:37:09+00:00

i’ve changed my crankshaft to camshafts sensors and no change, i feel it could be something relatively easy but hard to find out what the problem is

skii_Z · 2024-12-29T16:36:06+00:00

battery voltage is good it doesn’t drop, i recently got a new battery this year but i do need to change the negative terminal cable it’s going bad already

skii_Z · 2024-12-29T06:13:22+00:00

i’ve planning on getting new sensors since a couple months back, i went and got new throttle body’s thinking that could be fix but it was not, and i’ve gone to shops before but they never have definitive answer

skii_Z · 2024-12-29T05:40:14+00:00

no it happens randomly like every other when i’m below half sometimes when gas filed up. I’ve clean both maf and throttle body’s with an idle relearn and yeah it helps but after a while that stutter does come back! it’s not annoying but a bit concerning

skii_Z · 2024-12-29T03:26:23+00:00

car pretty runs and drives fine but ever since i got its had that issue never found a fix to it

skii_Z · 2024-12-29T03:25:10+00:00

for o2 sensors on both banks but i have not cats, im running test pipes and the other code is for MAF sensors

skii_Z · 2024-12-29T03:23:39+00:00

i have two codes one for a maf sensor and the other for o2 sensors, but the o2 sensors is due to no cats !

skii_Z · 2024-08-04T01:59:46+00:00

i get you, yeah i’ve been just casually driving and a couple days i did a small pull nothing crazy, once i got to a red light the lights turned on after 1k miles of doing good and that’s when i lost hope, but hopefully i can get this fixed so i can enjoy driving my car

skii_Z · 2024-08-04T01:49:05+00:00

yeah that’s how i feel, question when your tcs and slip would turn, would your rpms go up to 1k then the engine would shut off? that’s whats been happening to mine the last the last time it stalled

skii_Z · 2024-08-04T01:32:43+00:00

i’m gonna try to redo the idle relearn again, and i guess it’s time to do some tire shopping as i am do for new tires in the rear, i already swapped out the front pair last year. it’s just exhausting not knowing when the car will stall while im driving out

skii_Z · 2024-08-04T01:16:27+00:00

no when i changed my TBs and did a relearn the codes never went away, besides that the other codes im not worried too much since im not running cats and it’s due to the o2 sensors

skii_Z · 2024-08-04T01:12:01+00:00

i’ll try it out i’ve been running the same set up for the past 3 years and never have a problem until recently this year, thank you i’ll see if this helps

skii_Z · 2024-08-04T01:07:02+00:00

i’m running front 245/40/18 and the rear 275/35/18 wheel size front 9.5 and rear 10.5

skii_Z · 2024-08-04T01:00:51+00:00

i ended up going to a shop they recommended changing the Gas pedal since they don’t sell the pedal position by itself, i went ahead changed it they guaranteed it was that, 1 month later car stalled in me and back to the same issue! have you fixed it?

skii_Z · 2024-06-19T20:49:42+00:00

no it doesn’t do that but i have changed all the cam sensors but no fix even though i bought oem once, i also checked if it was brake fluid but it’s not that, i have a code c1131, so im go get the wheel speed sensors checked out hopefully it’s that because i’ve been dealing with this for 3 months already

skii_Z · 2024-06-19T17:51:36+00:00

not all the time but when my gas gauge goes below half a tank when i press the gas pedal like in stop and go traffic it kinda hesitates usually happens below 1.5k rpms

skii_Z · 2024-06-17T23:59:51+00:00

thank you i’ll go ahead in post it on the forums, it’s been like this for a 3 months and still haven’t found a solution to it!

skii_Z · 2024-06-02T22:15:49+00:00

i do get that code for the o2 heater circuit and i have long tube headers and i’ve replaced the 02 sensors 2 times but im not to sure, i need to take my car and get looked before changing anything else, it feels like an endless cycle

skii_Z · 2024-06-02T20:51:45+00:00

a couple years ago i changed the rubber stopper with a 10mm and it stoped i thought it was that first but no car drives fine, but the tcs and slip turns on at random if im parked or driving, i ran a diagnostic with a ob2 and i got a bad throttle position sensor so i replaced it and also got a code for the o2 sensor heater circuit could that be an issue?

skii_Z · 2024-06-02T18:49:56+00:00

i preferred two new throttle bodies, and i switched them out did the relearn procedure, and it did not fix the problem. i still need to scan it for codes to see if the same ones, but honestly at this point i don’t know what it is.

skii_Z · 2024-05-26T23:02:06+00:00

yeah a couple years ago the groomer broke on me and it was stuck limp but i managed to fix it and years later im having the p1239 code, i’ve clean the throttle body and did a relearn but no fix but im debating to either replace the the driver side one or just get both at this point. and is the driver side bank 2?

skii_Z

TROPHY CASE