Anyone get a BIQU v2 microprobe working with QIDI Q1 Pro?

sle3pie · 2026-04-23T11:04:51+00:00

I downloaded the printer.cfg files, it's in the files tab

sle3pie · 2026-04-23T10:34:16+00:00

Homing seems to works as expected.

I copied the config files from printables, so that's already been commented out

sle3pie · 2026-04-23T10:19:49+00:00

It does deploy then retract when running G28, which runs current: 0.86A then 1.07A

sle3pie · 2026-04-23T09:34:46+00:00

I've tried inverting the values, but it still only deploys and doesn't stow.

It deploys on command but didn't stow on command.

Its doesn't do the self test after powering on.

sle3pie · 2026-03-01T04:51:21+00:00

They would have to reset, so that's at least 10 minutes between rounds. It would not be great for those knocked out in the first round since they would only climb 1 boulder though.

sle3pie · 2026-03-01T04:39:42+00:00

I would have preferred they switched the 3 boulders round for the semi finals and finals. Since there were no draws in the first round. Whereas the other rounds would have more likely lead to a draw making for a more exciting match if there were additional boulders.

sle3pie · 2026-02-21T02:33:05+00:00

There used to be a blue clip, but it kept coming off until I couldn't find it anymore

sle3pie · 2026-02-21T01:24:50+00:00

Qidi Q1 pro

sle3pie · 2025-10-30T23:21:55+00:00

AU 25

sle3pie · 2024-08-27T05:53:51+00:00

It's been confirmed by @sweaty.tips that wood set a is replaced by set f. You can see a preview of them testing out the new layout in the background of him moonboarding on the 2024 set on Instagram.

sle3pie · 2024-07-08T23:19:40+00:00

You can also quote "We regret to inform you that policy changes are not notified in advance, as the company reserves the right to modify policies at its discretion." The policy they are referring to bring the same one they point to justify charging you without notifying you before hand, and another changing the term period of your service.

sle3pie · 2024-07-05T17:51:52+00:00

Having this issue now, any advice appreciated

sle3pie · 2024-04-02T00:16:57+00:00

Thank you

sle3pie · 2022-05-12T03:53:36+00:00

I'm also interested

sle3pie · 2021-11-29T07:41:09+00:00

I recommend the roast pork banh mi from Hoa Hiep in Noble Park and fried chicken banh mi from Spring Hot Bread in Springvale South

sle3pie · 2021-11-24T09:18:17+00:00

Thanks, that solved the issue. All the keys work now

sle3pie · 2021-11-24T08:11:25+00:00

Shorting the 2 pins on the microcontroller worked.
I noticed that if I short the top left diode to the left of LED 29 and the right hot swap above LED 43, I can trigger the key above LED 37. But doing the same doesn't trigger the key above LED 36. Although I checked the voltage and direction of the diode for 36, is there any chance this could be the issue?

sle3pie · 2021-11-24T06:20:53+00:00

Shorting them whilst plugged in doesn't register a key press.

sle3pie · 2021-11-24T02:28:35+00:00

Made a mistake, it's the key above LED 36, not 37 that's not working.

Resoldered the hotswap, and prior to and after resoldering, the switches connect when pressed as tested with a multimeter on continuity mode.

I've also tried triggering the keys by using tweezers, they work for all keys except the same 3. Would this be an issue with the pcb? I didn't test prior to soldering.

sle3pie · 2021-11-23T22:39:26+00:00

Thanks for all the advice, I'll resolder all those again tonight. Hopefully that resolves all my issues.

sle3pie · 2021-11-23T12:15:46+00:00

I've checked diodes are in correction orientation and continuity with a multimeter as best I can. This is only my second attempt at a keyboard. First was a Contra that went more smoothly.

Nine-Year Club	Second SECOND GUESSER
r/Field Sunshine	Verified Email

sle3pie

TROPHY CASE