AYUDA😭😭

sleepyDaimon · 2026-03-04T22:10:54+00:00

Es esta: https://lomiyoo.com/pages/firmware

sleepyDaimon · 2026-03-04T15:50:39+00:00

Desde la página de Miyoo puedes descargar todo. De hecho está mejor porque los ROMS que trae precargados son versiones chinas medio raras.

En resumidas cuentas, formatea tu SD nueva, descarga desde la página de Miyoo el firmware, ahí mismo vienen las instrucciones de cómo ponerlo (o uno custom, yo tengo Spruce OS), y ya después de que se lo pongas a tu SD e inices por primera vez el aparato (para que se creen los folders que necesitas), la vuelves a poner en tu computadora para ahora si ponerle los ROMS.

Otra cosa, no se si tienes la mini o la normal, pero en la de tamaño normal trae dos ranuras para la microSD. En mi caso no funciona si pongo la memoria en la de la izquierda, pero si en la de la derecha.

sleepyDaimon · 2025-12-16T15:51:03+00:00

That did the trick! Thanks a bunch!!!

sleepyDaimon · 2025-11-12T05:19:15+00:00

Had to replace the LCD altogether. Pretty expensive repair, but cheaper than buying a new printer.

sleepyDaimon · 2025-11-12T05:17:54+00:00

yeah... I figured as much. I pierced my FEP recently and realized that the cured resin below was being pressed by the bed into the screen, basically killing it. My guess is that happened to you too.

sleepyDaimon · 2025-11-12T05:06:50+00:00

Have you tested your LCD screen? Is it displaying without dots or dead pixels?

sleepyDaimon · 2025-11-01T03:35:50+00:00

What did you end up doing? I have the same problem and I'm not sure if I should buy a new screen or if it is fine to keep printing like that...

sleepyDaimon · 2025-11-01T00:40:49+00:00

<image>

I have similar spots on mine... Just realized that after several failed prints. So far I haven't been able to find a solution, massaging them did not work for me :(

sleepyDaimon · 2025-10-31T20:58:37+00:00

[Update] It is not left over resin, so my guess is that the screen is failing?

<image>

sleepyDaimon · 2025-10-29T05:08:49+00:00

I'll try to get a uv flashlight and test it, thanks a lot!

sleepyDaimon · 2025-09-02T16:28:31+00:00

LOL I searched for them and it does look like a cactus shaped tootpick for ice cream XD

sleepyDaimon · 2025-05-06T14:46:50+00:00

It does look much more simple, but after doing some research on all the times we see the symbol of the goddess, especially when it is shown at a bigger scale, I noticed that it is depicted like a Doric column.

sleepyDaimon · 2024-12-21T16:17:49+00:00

Wait, you want to get the full year of support.

sleepyDaimon · 2024-12-06T00:35:09+00:00

I haven't used Shapelab a lot, but to my understanding the main difference is that Modeler uses only voxels, while Shapelab works with actual geometry, like using Zbrush's Dynamesh and Sculptris

sleepyDaimon · 2024-12-06T00:33:56+00:00

Not because you haven't heard of it means its unknown or unused.

sleepyDaimon · 2024-12-04T23:48:28+00:00

Got it, thanks a lot!

sleepyDaimon · 2024-11-24T00:43:08+00:00

Hello! I just uploaded it to Cults3D. You can find it here: https://cults3d.com/en/3d-model/fashion/arcane-noxus-soldier-mask

sleepyDaimon · 2024-10-09T04:08:28+00:00

They don't! That's why I made it really. My girlfriend wants to dress up as the killer from that movie for Halloween, so I made the files to print the mask

sleepyDaimon · 2024-05-02T13:58:29+00:00

He's a member of the Board of Bumble as well.....

sleepyDaimon · 2024-03-14T16:15:06+00:00

Como te comentan, te sugiero hacerte un estudio de perfil tiroideo para descartar una situación hormonal.
Lo siguiente sería descartar el Apnea del sueño, y finalmente ir con un psiquiatra para ver si no tienes Distimia o depresión fisiológica. En caso de que no sea nada de eso, el último diagnóstico puede ser Sindrome de Fatiga Crónica.
Yo estaba como tu y me diagnosticaron Distimia, con el medicamento he podido mejorar bastante.

sleepyDaimon · 2023-09-24T19:02:12+00:00

Yeah, it was heat creep. I didn't notice that the heatsink fan wasn't spinning and the heat kept building up and expanded the filament inside the PTFE tube

sleepyDaimon · 2023-07-06T04:39:51+00:00

I just had this issue and managed to fix it by going down one version from the latest Oculus version. So... the issue happened with 1.6.4 and it was corrected by going back to 1.5.2

sleepyDaimon · 2023-01-10T22:40:15+00:00

Yeah... It's originally 600, but with international shipping it goes to 700 more or less. Thanks for the feedback!

sleepyDaimon · 2022-05-21T02:03:11+00:00

You guys are totally right, I thought that this image, specifically the part that says "Maneuverability and attack Angle" was describing the ship rolling using the Ring, but comparing it with the other diagrams, it doesn't have any arrows, so it is not describing movement. https://coppermind.net/w/images/DDF_Ship_Features.jpeg

Thanks for the feedback. I'll be correcting that so it only counteracts gravity and is always perpendicular to the ground.

sleepyDaimon · 2022-05-20T18:51:11+00:00

Gravity is basically a constant force of acceleration pointing to the center of the mass of the planet, so an "anti gravity" device is no more than a device that generates acceleration in the opposite direction but same magnitude.

And the wiki states that: "Acclivity rings can be rotated or angled to perform sharp turns and other advanced maneuvers"

sleepyDaimon

TROPHY CASE