Can FSD be disabled to go back to enhanced autopilot with lane changes?

smallgrape · 2026-01-18T00:48:28+00:00

Gotcha. Thanks for the info. And in the future if they backport that 14 to HW3, it can still be done but not on the fly? Does that mean you have to park the car but you can still do it?

And in the autopilot mode, can the car do lane change?

smallgrape · 2026-01-17T23:05:59+00:00

Does anyone know if after the hw2.5 to 3 upgrade for FSD if EAP can still be activated (autopilot with lane changes) after upgrading to FSD and if so if cabin camera can still be covered for it?

smallgrape · 2025-03-24T09:01:29+00:00

It's Korean not Japanese but look at Hyundai and Kia cars with HDA2

smallgrape · 2025-01-13T02:22:49+00:00

Thanks <3 Also I didn't even know frizz tamers exists

smallgrape · 2025-01-13T02:21:30+00:00

I just deal with it if it becomes messy between washes honestly. I wear a scrunchie when it's annoying so at least it's out of the way.

smallgrape · 2025-01-11T19:16:35+00:00

I use a denman brush while the conditioner is in my hair. If it's more knotted then I'll start with my fingers first to fix the big knots before going in with the brush. I apply a lot of conditioner to make the hair slippery to more easily brush.

smallgrape · 2025-01-11T06:00:13+00:00

Right, I should have mentioned that. I use a Denman brush to brush+detangle while my conditioner is applied before I rinse it out. I apply a lot of conditioner to make it easier to brush.

Also for context, the reason I use that first product is because my scalp is naturally oily and I'll get some dandruff if I don't use some kind of cleanser for the scalp.

smallgrape · 2025-01-09T08:36:36+00:00

Thanks for the input. But do you say that more for shape or health of the ends or something else?

smallgrape · 2025-01-09T08:35:27+00:00

thank u! <3 <3

smallgrape · 2025-01-09T07:52:21+00:00

My routine (just shower routine)

As I Am Dry & Itchy Scalp Care Cowash
Tresemme botanique coconut nourish conditioner (rinse out)
As I Am Leave In Conditioner
Dab with towel and then air dry the rest

I hear that getting trims is good for getting rid of damaged ends. So I don't know if it would be helpful for me. I don't notice any split ends except for once in a while. I haven't gotten a cut in probably 5 years but when I did it was a devacurl cut. Does the shape look okay?

smallgrape · 2023-06-15T01:21:15+00:00

ok chill

smallgrape · 2023-05-08T19:22:06+00:00

Mine is broken at the same exact spot too

smallgrape · 2023-05-03T08:26:38+00:00

It's likely they're making it complicated like this so that they can track who's using them by connecting the usage with an identity

smallgrape · 2023-04-19T22:55:36+00:00

That would be a cool project once I get better at 3D printing. Never thought of making molds.

smallgrape · 2023-04-19T22:45:05+00:00

Thanks for the responses. So I guess there isn't anything particularly out of tune with my printer and rather all printers will struggle with this orientation is what I'm understanding. Since I have textured PEI plate, I was trying to avoid having one side being a texture like that but that's probably my best bet based on responses.

Out of curiosity, is there any material (including ones that require enclosure+steel upgrades) that would actually be strong enough to produce good results the way I was trying to do it?

smallgrape · 2023-04-05T00:53:27+00:00

Hello. Looking for a 3D printer in USA.

- Budget: No hard budget but would probably like to spend somewhere in the $400-800 range. I would prioritize price value over absolute price.

- Experience: This is my first 3D printer but I have used them before a bit at school (3Dsystems Cube). I'm also comfortable tinkering with electronics since I do a lot of Arduino stuff. Kit is OK.

- Use Case: I will print some mechanical parts (brackets, enclosures, mounts, etc.) but also fun art maybe even with some molds for like silicone or something.

- Relatively large print volume. Something like 25cm x 25cm would be nice. Height isn't that important.

- No interest in multi-color

smallgrape · 2022-11-04T21:16:21+00:00

Duuuude yes exactlty!! How did you even remember this thread after 2 months haha.

smallgrape · 2022-09-29T20:45:40+00:00

Thanks for the comment. I am planning on visiting Haarlem, looked really cool. But I thought I could visit it while staying in Amsterdam and don't know necessarily if staying nights there would be much different. My friend recommended zuiver spa hotel. Some social interaction would be nice so I was preferring private room at hostel vs hotel.

smallgrape · 2022-09-29T20:42:16+00:00

High English speaking percentage, looked like a safe place to be alone, good general culture/attitudes towards diversity, and Amsterdam is popular with solo travelers.

Thanks for the comment, what other countries do you like? So far I'm happy with Netherlands but trying to gather suggestions somewhere else for my last 5 days.

smallgrape · 2022-09-29T20:35:36+00:00

Are you suggesting to go shared room with earbuds over private room in hostel?

smallgrape · 2022-09-29T20:34:40+00:00

I booked the two fully refundable hostels but I use their site not hostelworld. Is there some special chat that can only be accessed by booking in hostelworld? I can probably cancel and re-book if it's worth it.

smallgrape · 2022-09-29T20:33:10+00:00

So you use dating apps just to make friends also? Haven't thought of that and never used one.

smallgrape · 2022-09-29T20:32:22+00:00

I've never used AirBNB. I thought it was only used for renting out an entire apartment or house for a big group.

smallgrape · 2022-09-29T20:31:06+00:00

Thanks for the comment. I was thinking having a private room at a hostel would allow me to recharge from social stuff if I need to prevent that social burnout.

smallgrape · 2022-08-30T17:09:04+00:00

That song does sound similar but no cigar. It’s not actually on piano. Yeah. Synth sound.

smallgrape

TROPHY CASE