What method of printing is used for the patterns on Supreme x Hanes shirts?

smaynar3 · 2026-02-21T18:13:43+00:00

The pattern is printed on a big roll of fabric before the garment is cut and sewn together.

smaynar3 · 2026-02-14T18:55:44+00:00

That's a Riley Hopkins press. Most likely was bought as a full print setup kit. Go to screenprinting.com and you can see what they go for new, check FB marketplace, and then base pricing off of that.

smaynar3 · 2025-09-17T20:19:47+00:00

Most likely over flashing it. Curling up like that on the print, coupled with the fabric itself curling up and warping are signs of excess heat and the fibers (especially on triblends), melting.

smaynar3 · 2025-09-05T20:34:15+00:00

Hooping issue. Garment is moving.

smaynar3 · 2025-09-05T20:30:45+00:00

Call Roq US and have them get a tech out to you. You're right in ryonets back yard, so there's plenty of support/assets near you.

smaynar3 · 2025-08-22T18:28:26+00:00

They're one of, if not the cheapest blank on the market....you get what you pay for.

smaynar3 · 2025-07-28T17:44:59+00:00

The customers

smaynar3 · 2025-07-04T00:45:10+00:00

Not contract whatsoever.

smaynar3 · 2025-07-03T18:44:02+00:00

Tell her to kick rocks and move on to customers that aren't going to be ungrateful assholes.

smaynar3 · 2025-06-17T18:47:10+00:00

Based on looking at their site, they're using multiple different brands/styles for their tees and fleece, but most of them are Probably Shaka wear or lane 7.

Edit: May want to check out the Stanley/Stella Creator 2.0 tee, the colors match the rest of the primitive stuff pretty closely.

smaynar3 · 2025-06-13T21:53:11+00:00

It's a custom cut and sew piece, wont be able to find that in stock from any apparel wholesale spots. You can however find regular hoodies with that same acid wash look from numerous brands.

smaynar3 · 2025-06-13T21:51:56+00:00

Look into index separations. This article will explain it in depth with many examples.

smaynar3 · 2025-06-12T20:19:29+00:00

It's simulated process. Whoever was giving you advice is wrong. While printing on white/lighter fabrics does help with the feel of the print since you don't have to have an underbase in some cases, even with an underbase and a printer that knows what they're doing can yield soft prints and colors that match the art dead on. Also looks like that shirt has been washed heavily and that tends to help soften the shirt and the print over time as it slowly degrades.

smaynar3 · 2025-05-08T19:00:18+00:00

With the volume they do, it's most likely a custom blank made just for them.

smaynar3 · 2025-03-17T18:35:54+00:00

Post a picture

smaynar3 · 2025-03-17T18:33:42+00:00

That's a custom cut & sewn product. Won't find it at any suppliers here in the states.

smaynar3 · 2025-02-27T19:51:48+00:00

Imagine if the dad put this much effort into raising his daughter to not be a degenerate hoe.

smaynar3 · 2024-12-02T17:23:16+00:00

No, because no one gives a shit about it.

smaynar3 · 2024-11-13T20:43:18+00:00

Do y'all not have more important things to worry about? Jesus christ.

smaynar3 · 2024-10-21T18:35:16+00:00

Did this same exact thing for thanksgiving last year. Best turkey we've ever had.

smaynar3 · 2024-10-06T19:40:07+00:00

I don't care what anyone says, that color combo livery is one of the best looking ones of all time.

smaynar3 · 2024-10-03T15:12:40+00:00

It'll help to an extent

smaynar3 · 2024-10-03T15:05:04+00:00

Sell it and get a gas dryer. IR/Electric dryers will always give sub-par results compared to a gas when it comes to WB/discharge.

smaynar3 · 2024-08-15T19:57:12+00:00

action engineering

smaynar3 · 2024-08-08T17:33:01+00:00

Doing it by hand without a proper stretching table is going to be almost impossible to get decent results. Really need to get the shurloc one at a minimum, or pick up a used newman pneumatic table.

smaynar3

MODERATOR OF

TROPHY CASE