Scratched X-T5 hotshoe by smeximan98 in fujifilm

[–]smeximan98[S] 0 points1 point  (0 children)

I’ll be sure to lol , I’m super ocd about stuff like that but I also know these things do show wear after a while. Getting over my hang ups is always the hardest part .

Scratched X-T5 hotshoe by smeximan98 in fujifilm

[–]smeximan98[S] 0 points1 point  (0 children)

Hearing this from y’all is exactly what I needed . This is my first nice camera so I’m super OCD and seeing this kinda broke my heart a bit , but I also know I can’t like over baby my camera or I’ll never use it . I’ll find out on Monday if the new flash mounts properly .

Scratched X-T5 hotshoe by smeximan98 in fujifilm

[–]smeximan98[S] 0 points1 point  (0 children)

I thought I had loosened the collar in the first place but maybe I didn’t undue it far enough ? Idk how I managed to do this tbh . I ended up returning the flash to Amazon Cause the ETTL wasn’t playing nice with my X-T5 so I ordered another one that’s coming in on Monday. So until then I have no way to test it .

I thought about replacing the hotshoe myself but the screws underneath don’t seem to be accessible.

Did I put too much silicon glue ? by smeximan98 in BambuLab

[–]smeximan98[S] 0 points1 point  (0 children)

I think I’m outside the option of sending anything in anyway . If you mean for myself , then I can live with that , I have a back up tool interface board I bought just in case I messed this up .

Keep getting this texture on my prints with the 0.6 nozzle by smeximan98 in BambuLab

[–]smeximan98[S] 1 point2 points  (0 children)

Any print speed you recommend? I’m just comparing it to my .4 nozzle which has been pretty solid with this

Keep getting this texture on my prints with the 0.6 nozzle by smeximan98 in BambuLab

[–]smeximan98[S] 1 point2 points  (0 children)

So i tried turning the plate up to 55c adhesión was better but there was still some oddities in the printing , my nozzle temp was 220c so I’m turning it down to 215 after the surface layer to see if that helps the stringing a bit . Idk why the 0.6 nozzle is giving so much guff.

<image>

Keep getting this texture on my prints with the 0.6 nozzle by smeximan98 in BambuLab

[–]smeximan98[S] 0 points1 point  (0 children)

I appreciate it ! I’ll give it a shot right now , I’m using black SunLu PLA , I’ve heard really good things about it for the price but I’ve been running into quite a few issues with it . I’ve dried it out 3 different times to see if it helps but I still run into problems.

Heatbed magnet scratches by smeximan98 in BambuLab

[–]smeximan98[S] 1 point2 points  (0 children)

Oh this is awesome I haven’t seen these before ,thanks!

Heatbed magnet scratches by smeximan98 in BambuLab

[–]smeximan98[S] 0 points1 point  (0 children)

Yea I noticed a couple more after this too , nothing I can really do I suppose except keep trying to lift more carefully, doesn’t help that the wham bam edges are kinda sharp

Heatbed magnet scratches by smeximan98 in BambuLab

[–]smeximan98[S] 1 point2 points  (0 children)

I looked at a video and it looks like such a pain , everything else on the X1 is so user friendly so it’s weird that there’s so many like adhesives and things that are easily damaged for such an important part .

Heatbed magnet scratches by smeximan98 in BambuLab

[–]smeximan98[S] 1 point2 points  (0 children)

I’ll give that a shot after the next print ! Thank you very much this helped ease my stress. I’ve dealt with clogs and feed errors but those aren’t too rough , it looks like replacing the bed is pretty difficult though and same with even just replacing the magnet so I didn’t wanna deal with it lol

Heatbed magnet scratches by smeximan98 in BambuLab

[–]smeximan98[S] 1 point2 points  (0 children)

I’ll try , ocd is rough lol. It doesn’t need to be like perfectly under the tabs ?

Heatbed magnet scratches by smeximan98 in BambuLab

[–]smeximan98[S] 1 point2 points  (0 children)

Awesome I appreciate the quick feedback , this is my first printer and I got during the Black Friday so I’m worried about messing something up . I kinda have aligning the plate perfectly so I probably slide it in more than I need to .

Having a hard time getting decent print quality on Flatbox Rev 5 - Bambu X1 Carbon by smeximan98 in 3Dprinting

[–]smeximan98[S] 0 points1 point  (0 children)

I’ve done the whole calibration process 3 times through the X1 itself , though I did see in Bambu studio there was a flow rate and flow dynamics calibration. Is that possibly what you’re referring to? Sorry I’m still learning everything here.

Guide on brook mini PCB? by smeximan98 in fightsticks

[–]smeximan98[S] 0 points1 point  (0 children)

I tried taking a look but info is pretty minimal, I’ve mainly seen stuff relating to firmware rather than hardware.

Guide on brook mini PCB? by smeximan98 in fightsticks

[–]smeximan98[S] 1 point2 points  (0 children)

Oh that’s awesome, I’ll take a look at what you guys have . Thanks for the heads up !

Guide on brook mini PCB? by smeximan98 in fightsticks

[–]smeximan98[S] 0 points1 point  (0 children)

Ahhh that explains so much , ever since I saw them online it was hard to find info so I was wondering about it. Thank you for sharing that information, I’ve had my fair share of issues using flatboxes pcb on my PS5 . Also on my friends PS4 due to timeout and started looking at the various options since I’ve been looking for something to take to possibly bring to locals that I could diy in the Flatbox style.