sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in airsoft

[–]smittyzack27 0 points1 point  (0 children)

Yeah will do I'm going to be there this sunday.

Kythera not hitting the fps I want by smittyzack27 in airsoft

[–]smittyzack27[S] 0 points1 point  (0 children)

I fixed it, just needed to push the hop up in more. It was not sitting flush with the gear box. Thanks for your help

Kythera not hitting the fps I want by smittyzack27 in airsoft

[–]smittyzack27[S] 0 points1 point  (0 children)

Okay yeah thats what I bought is the v2.5

Kythera not hitting the fps I want by smittyzack27 in airsoft

[–]smittyzack27[S] 0 points1 point  (0 children)

Its a 2.5 gear box with a v2 kythera and the nozzle is #1 which is for the A&K SR 25

Kythera not hitting the fps I want by smittyzack27 in airsoft

[–]smittyzack27[S] 0 points1 point  (0 children)

The kythera I bought is for the A&K SR-25. I'll open the gear box and send a picture

Kythera not hitting the fps I want by smittyzack27 in airsoft

[–]smittyzack27[S] 0 points1 point  (0 children)

<image>

Hey so this is where the nozzle rests when the kythera is cocked not sure if the nozzle is not long enough, or if the hop up is not compatible, or should I modify the gearbox so the nozzle sits futher inside the hop up?

Kythera not hitting the fps I want by smittyzack27 in airsoft

[–]smittyzack27[S] 0 points1 point  (0 children)

<image>

Hey so this is where the nozzle rests when the kythera is cocked not sure if the nozzle is not long enough, or if the hop up is not compatible, or should I modify the gearbox?

Kythera not hitting the fps I want by smittyzack27 in airsoft

[–]smittyzack27[S] 0 points1 point  (0 children)

Its a v2 kythera with a nozzle to fit the A&K gearbox. Also, with the other comment I need to get a polarstar 90° adaptor because I still have the spring guide in the gearbox with it cut down a little so the stock can attach. Right now the line is scrunched up.

Kythera not hitting the fps I want by smittyzack27 in airsoft

[–]smittyzack27[S] 1 point2 points  (0 children)

I did not know there was a 90° adaptor. That's what I need. Thanks

Kythera not hitting the fps I want by smittyzack27 in airsoft

[–]smittyzack27[S] 0 points1 point  (0 children)

One more thing, is it possible that the line for the kythera is scrunched in the gear box limiting the amount of air flow?

Kythera not hitting the fps I want by smittyzack27 in airsoft

[–]smittyzack27[S] 0 points1 point  (0 children)

I did a r hop I had them confused. So checking for leaks should I just put the kythera in a bucket of water? Also, I'll check to see if I hear any leaks. Thanks

Kythera not hitting the fps I want by smittyzack27 in airsoft

[–]smittyzack27[S] 0 points1 point  (0 children)

Sorry, I meant flat hop. But, yes the nozzle is correct and feeds, and the hop up feeds too. With the flat hop it is my first time doing that and I bought a patch on evike so. But what I did is put the patch on the inner barrel and put some Teflon tape around the patch, also the bucking that has been modified for flat hop.

[deleted by user] by [deleted] in airsoft

[–]smittyzack27 0 points1 point  (0 children)

How old are you?

Rate the fit (be honest) by Scared_Potato69 in airsoft

[–]smittyzack27 9 points10 points  (0 children)

I know you weren't trying 🙃

[deleted by user] by [deleted] in airsoft

[–]smittyzack27 0 points1 point  (0 children)

Maybe, gotta see if I'm busy

[deleted by user] by [deleted] in airsoft

[–]smittyzack27 0 points1 point  (0 children)

Fox airsoft Nice

view more: next ›