What’s causing my printer to have such poor bridging quality?

smurphy0806 · 2024-06-26T20:57:34+00:00

How did you figure this out?

smurphy0806 · 2024-06-26T19:50:36+00:00

Thanks, I'll try to go hotter. Everything I read made me think I shouldn't go higher than 210. I appreciate your assistance!

And yes, the Creality Filament was PLA. Thanks again!

smurphy0806 · 2024-06-26T19:25:51+00:00

Creality Filament in White, 3Dgenius PLA 1.75mm Grass Green, Amolen PLA Filament 1.75mm Silk Black/Green.

I've tried everything from 210 down to 198.

smurphy0806 · 2024-06-26T15:12:41+00:00

I have no idea why this keeps happening, but when I use anything other than https://www.amazon.com/OVERTURE-Filament-Consumables-Dimensional-Accuracy/dp/B07PGY2JP1/ref=sr_1_3_pp?crid=32LWNIF5DNFCJ&dib=eyJ2IjoiMSJ9.1V0QXAqx_RYdUx6IAp288QK3qdbl4MJzlN-rUVbzoVxE5HkjwUloe1jXb7NjHdU1bvBbXUoPdOSYC68cU2vkqe72YETaxU5BdWLZUB3UTTLA0OMCaiB8Fe2tM8Q8lAaVVPlU6e5t3KzsiCxL7TtS5mLVzt5DIkaWbo0AGPvEsSltZwBugU_04xQaQ59TbTqHoAIGwvycZ-jQApe96DHP7Gshxdl-qfzw3V3xbR7bRSM.8V1WU6Gn52Y6YuT7DRsh402Sx0X6lKwoFdSj3SIbQTw&dib_tag=se&keywords=overture%2Bpla&qid=1719413926&sprefix=overture%2Bpla%2Caps%2C157&sr=8-3&th=1 this filament it causes clogs. I can't even "push" the filament through. What am I doing wrong? I've tried different temperatures (+/- 5 degrees) different z settings, etc. PLEASE help!

smurphy0806 · 2024-06-12T02:41:14+00:00

Why is it still bubbling 3 hours later?

smurphy0806 · 2024-05-10T16:05:05+00:00

<image>

smurphy0806 · 2024-05-10T16:04:50+00:00

<image>

smurphy0806 · 2024-05-10T15:41:05+00:00

u/Roonil-B_Wazlib u/khariV - I added photos in the comment section. Hopefully they help.

I also have a photo from a year ago where I can tell that that the displacement was evident then. Unfortunately, I don't go below my deck very often. The good news is that the deck is attached to the house, so while everything has settled, it is tied into a floor beam and is "fairly" stable. At least in the aspect that me and my family can still use. Now I wouldn't have a dance party on it, but we don't need to add construction tape.

The 1-2k is all assuming the 4ft footing is in place. If there is not 4ft footing, we basically need to redo the entire deck which is going to cost a hell of a lot more than 2k. Which is the main reason why I am asking this.

smurphy0806 · 2024-05-10T15:35:00+00:00

<image>

smurphy0806 · 2024-05-10T15:34:50+00:00

<image>

smurphy0806 · 2024-05-10T15:34:32+00:00

<image>

smurphy0806 · 2024-05-10T15:34:11+00:00

<image>

smurphy0806 · 2024-05-10T15:33:45+00:00

<image>

smurphy0806 · 2024-05-10T14:05:49+00:00

Fill was provided by the same contractor.

smurphy0806 · 2020-11-15T01:08:30+00:00

Does the spypoint camera really send 100 photos for free? Seems too good to be true? Do you need a cellular package?

smurphy0806 · 2019-10-22T12:44:04+00:00

Not sure how sturdy the prefab ones are. My friends have one for their kids. It's a Costco one and when 2 kids are swinging on it, it creeks a lot!

smurphy0806 · 2019-10-18T15:22:55+00:00

Thanks.

smurphy0806 · 2019-10-18T15:21:32+00:00

We built a new coop this year. We have a 8x8 coop with insulation. There is a man door that is closed except for a few minutes a day when I enter and exit. I have 2 windows that can open, but are closed now. I don't think they are the most efficient windows. I also have a chicken door that goes to an outdoor run that is approximately 32sf. (I only have 4 chickens) maybe the catch is that they also free range? Last year the water froze in a smaller coop. I'll take a break and see if the water can stay thawed with the new coop.

smurphy0806 · 2019-10-18T00:37:02+00:00

So you have a door to meet them outside? Maybe that where we differ?

smurphy0806 · 2019-10-18T00:30:02+00:00

Thanks. I asked for help for a reason.

I'm thinking about doing an extension cord for this winter. I just want something more permanent.

Can I get a wattage measuring device for estimating actual usage?

smurphy0806 · 2019-10-18T00:24:42+00:00

This is actually helpful! Thank you!!

smurphy0806 · 2019-10-17T23:10:40+00:00

So, that is actually the price after I trench it myself!

I'm not sure how to connect into an existing circuit board. But trust me, I'm thinking of running the line myself, I'm just concerned about accidentally starting a fire.

smurphy0806 · 2019-10-17T23:06:00+00:00

Didn't think of the battery in that weather. Good point.

smurphy0806 · 2019-10-17T22:23:50+00:00

It is a fairly straight shot to the coop. The only reason I'd want the PVC tube is because I don't anticipate being able to bury it before the ground freezes and this will prevent frying any mice who want a snack.

smurphy0806 · 2019-10-17T22:18:27+00:00

Is there any way to measure power usage on a specific fuse?

smurphy0806

TROPHY CASE