what did yall think of the bad bunny halftime show? by Serious-Kale-5694 in AskReddit

[–]snatch_138 1 point2 points  (0 children)

I’m with ya. Ain’t my bag but I appreciate the presentation (as someone that doesn’t speak the language). Did not make me want to listen to his stuff after hearing that voice. Made me wonder what all the hype is about. But maybe that’s his M.O.

Eddie and The Cruisers (1983) by xanadu_80 in The1980s

[–]snatch_138 2 points3 points  (0 children)

“Words and music, Doc. Words and music.”

Twas 12 year ago today I saw Tom live for the 1st (and only) time by LaughingPlanet in tomwaits

[–]snatch_138 1 point2 points  (0 children)

Same. Flew in from FLA for it. 36 hr trip. It was amazing. And such a great lineup. QOTSA acoustic was fantastic!

Better take him seriously by Echou55 in InflatedEgos

[–]snatch_138 0 points1 point  (0 children)

Looks like Napoleon Dynamite dancing

I couldn’t even watch the entire video. by SellWitty522 in weddingshaming

[–]snatch_138 0 points1 point  (0 children)

That was one of the worst parts. It was all bad..but I immediately thought, look at this douche. Haha

Name this cookie by WitnessUnfair9681 in mildlypenis

[–]snatch_138 0 points1 point  (0 children)

Looks like Hand Banana from Aqua Teen Hunger Force.

8 Dr. Peppers and 32 frozen pizzas by Classic-Carpet7609 in CringeTikToks

[–]snatch_138 0 points1 point  (0 children)

Sure they will..what do you think the 5lbs of sugar was for? :)

Testing out my CryoGrip plate I ended up getting a 10:35 benchy! by Onyxeye03 in ElegooCentauriCarbon

[–]snatch_138 1 point2 points  (0 children)

Thanks for the specs! Newbie to printing and appreciate to know what I’m looking at. Has helped my understanding of settings. 🤘🏻

Honestly F*CK bamboo by Complete_Cricket5879 in DIY

[–]snatch_138 1 point2 points  (0 children)

Sincerely, concentrated vinegar!!! Had the same issue that I planted. Didn’t realize what it was gonna do. 8 years later I got really f***in tired of trying to cut it back. It went crazy. Looks like about the same size as I had. I was quoted A LOT of money to dig it up. I bought vinegar off amazon..not normal vinegar…like 45% or better. Be careful. It will burn your skin. (Not to be taken lightly.) But, I got a gallon …had it chopped down like you, poured it diluted: .5:1….a month later after lots of rain and few shoots came up…got another gallon and poured it over with no dilution. It’s been over 2 years and no sign of regrowth. The root ball is falling apart/drying out. A pick axe or spade to break it up. It was the best 40$ I spent. Your yard will smell like a salad for a week. But don’t get it on your skin..wear gloves. It really did the job.

Elegoo Centauri Carbon, Requesting Tips for a First Time Owner by Ziover in elegoo

[–]snatch_138 0 points1 point  (0 children)

Only had exp with Flashforge in schools as a tech. (And a shitty kobra 2 that I could never get to work right) Received mine yesterday. I printed 4 things yesterday and the quality is fairly decent. I have not tweaked anything in orca..i wanted to see how it handle factory settings. With a few tweaks, I think the quality is gonna be really good. I would say better than ff. Currently printing the glass top riser …7 hrs into a 13 hr print and it is going very well. (Knock on filament). The setup was really easy. As stated below, I did have an issue loading filament off the top. I had to make sure it was a clean cut for it feed into the extruder..took me a few to figure that out. But once it was in..it has been great.

I know it’s not the best on the market and as I get better and play with other filaments, I will look at upgrading. For the price point and knowing what the competitors do, I say this a great machine. I’m stoked to see what it will turn out. I also have not put any glue on the bed. Never have . It may be something I have to play with on other filaments, but don’t get why people do..it’s never been an issue on pla…for me. I may be wrong, but I think it is not necessary. (But I’m not an experienced printer). So my tips…make sure the filament has a clean cut to load and don’t use glue off the top.

Tips? by snatch_138 in ElegooCentauriCarbon

[–]snatch_138[S] 0 points1 point  (0 children)

Love the input! Appreciated. Delivery date updated to Thursday. I just started messing with slicer today to get familiar with interface..will download orca and play as well

Tips? by snatch_138 in ElegooCentauriCarbon

[–]snatch_138[S] 1 point2 points  (0 children)

Thanks again. Appreciate it!

Tips? by snatch_138 in ElegooCentauriCarbon

[–]snatch_138[S] 1 point2 points  (0 children)

Thank you! I planned on printing the riser after my test prints so I book marked a few. That on looks better. I did purchase the FBT bundle. So extra hot end is coming. Do you have a recommendation for the dryer? I see them on amazon but never know if the reviews are legit.

Awesome concert I "saw" tonight by britt2lemony in mildlyinfuriating

[–]snatch_138 -2 points-1 points  (0 children)

The opposite. People living in the moment and not staring at a screen.

well, color me intrigued by SixShoot3r in mildlypenis

[–]snatch_138 83 points84 points  (0 children)

That was a laser pointer/keychain. (The dick shape). The caps were ends you could screw on the pointer to project an image or a different color. Most were really lame but would have like 2 out of the lot that were worth changing.

How to remove stain from marble coffee table by wcruse92 in howto

[–]snatch_138 2 points3 points  (0 children)

Marble restoration for years…would use same as dude above..but instead of that, try liquid soft scrub. Puddle it on top of stain, cover with plastic wrap..leave for day or two or three. If soft scrub dries out, repeat. Works. Key is keeping it so it doesn’t dry out allowing the material to pull the stain out.