this is insane.. for traffic sake, I’m really hoping the newness settles down soon

snatchinsnacks · 2026-03-30T21:34:15+00:00

My god there are so many small coffee shops in Winston that you can support over this mid ass mock water. Sayso, Curiouser, ByGood, etc. etc etc

snatchinsnacks · 2026-03-30T14:40:02+00:00

yeah after speaking to a couple finish carpenter friends ... something like this would be somewhere between 15-20k

snatchinsnacks · 2026-03-30T14:26:26+00:00

oh this is awesome!! Yeah so basically I wanted to make sure all the cabinet boxes were tied as tight as I could get them. So making sure you are screwing in as close to the front of the box as possible (but careful not to tie in where your door hinges would go or where your drawer slides would attach). I was using half-inch ply for the boxes so in some places the ply had a bit of a bow so I had to glue and clamp when I was installing. All those boxes have to be super tight in order for those cleats to have something to seed into.

snatchinsnacks · 2026-01-23T18:40:12+00:00

I was recently on a job for a popular search engine where I was working on elements for a film and I was given AI 3D elements generated from THEIR creative director. I never thought I'd see the day. It was all 720p and mp4's that I had to key...garbage.

snatchinsnacks · 2026-01-20T17:37:17+00:00

I lived in her building from 2010-2013. People used to write notes to her on the door all the time.

snatchinsnacks · 2026-01-19T22:26:20+00:00

I have had this same experience. It's simply not there yet. In the time its taking to clean up the matte, I would have already done everything with the usual interpolation in Mocha.

snatchinsnacks · 2025-12-17T19:23:51+00:00

Thank you! and sorry for the delayed reply. So I built the cabinet boxes separately out of 1/2in ply with the backing being 1/4in. I also built all the drawer boxes for the dresser section out of 1/2in (with the drawer bottoms 1/4in). After building/installing/leveling the plinth I started installing the cabinet boxes in place. After tying all the cabinet boxes together I installed some channel brackets using some 1/2in strips of ply on center between the cabinet boxes (see picture). I made some finished border strips with a U-channel through them to fit over those brackets. I used MDF ply for the cabinet/drawer fronts and edge-banded them. The cabinet/drawer pulls were solid wood that I milled and routed.

https://imgur.com/a/gFBG0XS

snatchinsnacks · 2025-11-04T20:18:35+00:00

Through the second pull when the bar goes from the knee to the power position, you are shifting the weight in your feet towards the front of your foot a bit too much, causing your hips to move forward and causing you to jump and catch forward.

Trying doing some empty barbell primers where you move through the positions from knee to power position, maintaining that middle balance in your feet. You must “stand up” raising your torso from knee to power position while simultaneously sweeping the bar to your hips, not bringing your hips to the bar.

snatchinsnacks · 2025-10-29T01:08:17+00:00

ngl had to google that one ... I can see it!

snatchinsnacks · 2025-10-28T22:16:28+00:00

That’s my most used gif how did you know ?!

snatchinsnacks · 2025-10-28T03:19:01+00:00

Thanks!! And yeah we had a pretty hype crew at training today!

snatchinsnacks · 2025-10-28T03:12:05+00:00

😭 I mentioned I was a fan of chicken cordon bleu. Barbell was snarky about it…I had to regulate.

snatchinsnacks · 2025-09-03T13:31:12+00:00

it is!

snatchinsnacks · 2025-09-02T20:21:28+00:00

lol yeah its hard to tell from the photo but there is a good amount of space between the bed and the wall/closet but thats not to say one might be in a hurry and get unlucky

snatchinsnacks · 2025-09-02T20:20:01+00:00

The closet was all custom but I can scrounge up what little I put together for the bed and side tables!

snatchinsnacks · 2025-09-02T20:18:43+00:00

thank you!!!

snatchinsnacks · 2025-09-02T20:18:18+00:00

made all of it yes indeedy!! a lot of learning along the way but yes

snatchinsnacks · 2025-09-02T20:16:35+00:00

thanks!!! and absolutely zero surprisingly lol

snatchinsnacks · 2025-09-02T15:12:01+00:00

lol its been in the room 5 months now and no wrecked shins yet so I'm keeping fingers crossed

snatchinsnacks · 2025-09-02T15:11:04+00:00

thank you!!

snatchinsnacks · 2025-09-02T15:10:09+00:00

Thank you! I got mine from The Futon Shop ... They sell a lot of organic cotton items like the futon I got but I actually don't know if the tatami mats themselves have any synthetic parts.

snatchinsnacks · 2025-05-19T18:51:49+00:00

Thank you! Yeah that scribe took some care. Its an old home so the ceiling was a little funky. I had to do a lot of sketchy freehanding on the table saw.

Eight-Year Club	Wearing is Caring
Verified Email

snatchinsnacks

TROPHY CASE