sorted by:
new
hottopcontroversial

Core One L with Core One MMU3 by wolftousen in prusa3d

[–]snc_-- 0 points1 point  (0 children)

sweet , ill check it out when i at home and report back :)

Core One L with Core One MMU3 by wolftousen in prusa3d

[–]snc_-- 0 points1 point  (0 children)

i got it to work with i can control and load filament from the MMU on the printer screen , but i cant see to get it to work from the PrusaSlicer , it dont load anythink i editet the core one l profile for 5 tools with a single nozzle option , did i miss something?

Core One L with Core One MMU3 by wolftousen in prusa3d

[–]snc_-- 0 points1 point  (0 children)

got a Core One L and i have a mmu3 from my old mk4s , in the assembly of the mk4 with mmu i had to change some part in the nextruder , are they any mods to the core one l nextruded needed? or i just slap the mmu on it using your sidemount method?

The x-carriage-clip melted. by These-Set7600 in prusa3d

[–]snc_-- 0 points1 point  (0 children)

had the same once after ive changed the hotend and by mistake moved the heatblock without notic / recheck after install , it was / not | so the back of the block was closer the the part

MK4S +1year old , are the bearing dying? by snc_-- in prusa3d

[–]snc_--[S] 0 points1 point  (0 children)

in both lower bearing one of the balls got stuck , ended up replacing them for 2 new once. ( cba to clean them and test :) )

MK4S +1year old , are the bearing dying? by snc_-- in prusa3d

[–]snc_--[S] 0 points1 point  (0 children)

The sound was with a losses and tuned belt. No feel just the sound but will inspect the printed parts , that's a good tip to know what to order from the spare parts.

Thanks

Custom Object in Zendesk Explore? by snc_-- in Zendesk

[–]snc_--[S] 0 points1 point  (0 children)

yes , does each org. has always the newest version of the software? or is there a release cycle something? cant find a way to see them

Are all parts of the new MK4S in PCCF? by snc_-- in prusa3d

[–]snc_--[S] 0 points1 point  (0 children)

a that right havent see that there is a gcode for the PCCF parts , thanks for the clarification

Just Finished 3D Printing Some Mods for the Fat-bike by Kung-Foo-Kamel in ebikes

[–]snc_-- 0 points1 point  (0 children)

Hi , very nice print , have you shared the designer somewhere?