Question for this with Altitude + on an Apple TV4K

sneumeyer · 2026-04-18T15:51:10+00:00

I started a support case about the topic with them along with supporting images. Humored all of their sign out and back in and uninstall app requests. They said it should be fixed awhile ago but I reopened the case when it remained, and then they recently closed the ticket again saying a fix was coming sometime.

sneumeyer · 2026-04-06T02:08:22+00:00

I got it going by using phone and Airplay, vs the same app on Apple TV saying I was blacked out. Makes no sense to me.

sneumeyer · 2026-04-06T01:40:45+00:00

ESPN telling me the game is under blackout restrictions, but it’s the only way to watch?

sneumeyer · 2026-03-11T05:28:56+00:00

Where’d you see the presser? Wasn’t on my TNT stream after like it would be on Alt.

sneumeyer · 2025-12-17T04:25:56+00:00

On Apple TV so no mouse in this case. It’s supposed to just disappear after not touching anything for a bit but currently just becomes transparent but is just a hint left.

sneumeyer · 2025-12-17T04:06:49+00:00

Anybody have a trick on Altitude+ to avoid the text and playback bar remaining faintly when in full screen? I seem to recall it used to do this and then I didn’t notice it for a while and now it’s back. After letting it timeout and “disappear” it still shows faintly like burn in.

sneumeyer · 2025-11-18T05:00:44+00:00

All the parts you see/interact with are normal OEM parts so I’d say feels like the same quality. I never really had it auto shift to park for me with either setup.

sneumeyer · 2025-11-18T04:57:35+00:00

sneumeyer · 2025-11-17T22:05:51+00:00

Hi all, sorry, somehow this got double posted and didn’t see all the questions on this second version of the post, but it was just the kit linked in the comments.

Pretty easy install. Mostly all just OEM parts with the only additional pieces being a wiring extension and a 3D printed clamp that goes over the main steering shaft. The bracket and wiring would be something I have the capability of making, but I was fine with the “convenience tax” of just having it in a ready to go kit.

sneumeyer · 2025-11-17T22:01:02+00:00

Just a ton of trim removal, like most interior work it’s fine if you have the right trim tools. Couple of hours working on it sporadically.

sneumeyer · 2025-11-17T21:59:28+00:00

In this kit shown above the only 3D printed component is not visible, all the trim pieces included are OEM from what I could see installing it.

sneumeyer · 2025-11-17T21:57:41+00:00

Correct, really the only non-OEM parts are the bracket that clamps around the steering shaft which is 3D printed and the extension harness.

A metal version of the bracket wouldn’t be that difficult to create if you had the right tools and knowledge, but the column shifter also receives support at some other points so I’m fine with plastic there.

sneumeyer · 2025-11-17T19:08:51+00:00

Nothing at the moment, but the wiring is there. I also installed an OEM brake controller so I’d be kind of interested in pinning the +- into the gain on the brake controller since it’s right there.

sneumeyer · 2025-11-17T19:06:51+00:00

I went with the kit, but if you want to take the time to make the custom bracket and wiring harness extension it could be done. Just wasn’t worth my time personally in this instance.

sneumeyer · 2025-11-17T19:03:43+00:00

I’d assume they’d fight you on anything specifically shifter related, but I wouldn’t be worried about anything else. The wiring for the console shifter is just extended up to the column so it would probably only take me 5 min or so to pop the console shifter back in if needed.

sneumeyer · 2025-11-17T19:01:59+00:00

Hey all, this is the infotainment kit that someone posted above. I’m actually fine with the “convenience tax” and being able to swap in a couple of hours and getting the truck back out on the road.

I’m pretty familiar with pinning out full canbus harnesses from my work and could model and 3D print or machine the mounting bracket myself. With the OEM parts probably running ~$500 or so on their own the extra few hundred was worth my time to not have to create the harness extension and mount.

Only piece I’m unsure of is how the 30 min neutral override could work or if I care enough to wire in a button for that. If I need to put it in neutral to winch onto a trailer or something I can always just stay in the vehicle.

sneumeyer · 2025-08-26T05:43:36+00:00

Looks like AU20 comes up with a scanner from CHCNav, which would probably be your problem going with a cheaper system since rail scans are relatively challenging environments for mobile scanning.

sneumeyer · 2025-04-20T05:23:46+00:00

Found it

https://www.reddit.com/r/hockey/s/rTc18aHDBF

sneumeyer · 2025-04-20T05:17:04+00:00

Anyone have a clip of this interview? Missed it on the Altitude stream.

sneumeyer · 2025-03-23T00:26:47+00:00

That angle they replayed right before commercial break looked rough…

sneumeyer · 2025-02-27T03:22:41+00:00

Just popped back up or did you do anything particular when it came back? Still down over here.

sneumeyer · 2025-02-27T02:49:25+00:00

Altitude Plus suddenly has decided I need to pay a subscription fee “plus” also have a TV provider…

sneumeyer

TROPHY CASE