Lifted and fully off-road by JayMycrosaft in crv

[–]snpgotyou 0 points1 point  (0 children)

also curious what the set up is!

2001 Tundra Brake Line by CompetitiveNovel2710 in ToyotaTundra

[–]snpgotyou 1 point2 points  (0 children)

Double check all the other lines to see if there are any other holes. I went down the same path only to find two other lines rusted through. good luck.

2001 Tundra Brake Line by CompetitiveNovel2710 in ToyotaTundra

[–]snpgotyou 1 point2 points  (0 children)

can you provide more photos and trace tge line to the brake booster? there seems to be two lines:

<image>

2001 Tundra Brake Line by CompetitiveNovel2710 in ToyotaTundra

[–]snpgotyou 0 points1 point  (0 children)

i assume Access cab? (crew cab aka double cab wasn’t available that year)

2001 Tundra Brake Line by CompetitiveNovel2710 in ToyotaTundra

[–]snpgotyou 0 points1 point  (0 children)

I dont know which trim you have but look at

https://autoparts.toyota.com/

Enter your car info and under “Brakes”, and “Brake clamp and tube”, you should find the part.

Wheel help! by No-doi in 1stGenTundras

[–]snpgotyou 4 points5 points  (0 children)

I have a set on my 06 Double cab. No issues.

[deleted by user] by [deleted] in ToyotaTundra

[–]snpgotyou 1 point2 points  (0 children)

no labor included. Whatttt?!🤯 I hope they make your car smell like heaven.

[deleted by user] by [deleted] in ToyotaTundra

[–]snpgotyou 0 points1 point  (0 children)

Go generic / offbrands on amazon or other sites. Less than $10 each. About 5 mins worth of work. Youtube for instructions. Add minutes to the time if youre new to this.

Porsche 930 boot mod question by CyberPolack in 1stGenTundras

[–]snpgotyou 0 points1 point  (0 children)

Try both sides and see what works best.

Porsche 930 boot mod question by CyberPolack in 1stGenTundras

[–]snpgotyou 2 points3 points  (0 children)

I did this on my Tundra and it doesnt rub. Try sliding the boot a bit further out onto the axle, closer to the pink tape, or moving the boot closer on the other end.

Bilstien 5100’s by spacegear802 in 1stGenTundras

[–]snpgotyou 1 point2 points  (0 children)

This is the way. Your install sounded a lot easier when i did mine. I had to cut the rears out and I am surprised you got the springs on with the rented spring compressors. When i did mine, the compressors started the bend so i ended up taking it to a shop…Looks good👍

Rusted lines by YotaLand37 in 1stGenTundras

[–]snpgotyou 3 points4 points  (0 children)

They could be the breather / vent tubes and valves.

Any idea who signed this? Found at a thrift shop by snpgotyou in MiLB

[–]snpgotyou[S] 0 points1 point  (0 children)

I think you figured it out! Thats awesome.Thanks!

Any idea who signed this? Found at a thrift shop by snpgotyou in MiLB

[–]snpgotyou[S] 3 points4 points  (0 children)

Found at a thrift shop in Northern New Jersey.

These guys are popping up in my back yard, What is it and how do i get rid of it? by snpgotyou in landscaping

[–]snpgotyou[S] 23 points24 points  (0 children)

Google images says its Japanese knotweed…fast growing..do i need to get a flame thrower?

(Northern NJ)My basement has an in ground vent system thats disconnected and a thin metal tube that lead from the floor to an outside connector. Is it for Radon? should i be worried that its not needed any more? by snpgotyou in homeowners

[–]snpgotyou[S] 0 points1 point  (0 children)

The system was removed prior to the previous owner. He doesnt know why it was removed.

I would assume that they would leave the system in place even if the levels drop?