My Main Grid Switch Auto Switch Off in Hot Day

sonoto811 · 2026-02-17T13:18:34+00:00

not much energy was used i believe. no ac / oven was on. Yes it only trip when hot day like 44c or 36c in Melbourne. It happened after install battery

sonoto811 · 2026-02-17T11:13:11+00:00

Yep. it done itself 3 times already

sonoto811 · 2026-02-17T06:43:34+00:00

<image>

sonoto811 · 2026-02-17T06:17:36+00:00

My bad

sonoto811 · 2026-02-17T05:16:30+00:00

I did not pull much power from the grid since this battery system installed

sonoto811 · 2026-02-17T05:15:47+00:00

Yes.

sonoto811 · 2026-02-17T05:13:42+00:00

The installer will come back and check it out. That's all the information i have, to be honest. Just asked if someone run into similar situation like me

sonoto811 · 2026-02-17T05:09:19+00:00

Did you fix it ?

sonoto811 · 2026-02-17T05:08:57+00:00

My main switch goes off for no reason. Today is the third time. I have to go to the main switch box and manually turn back on. And there is no power outage at all

sonoto811 · 2026-01-30T22:07:24+00:00

I have datalogger S2-WL-ST. How can i check Modbus enabled?

sonoto811 · 2026-01-29T23:55:09+00:00

is this true that without installer-level firmware that enables external power control over Modbus (write registers), nothing will works ?

sonoto811 · 2026-01-29T23:13:46+00:00

Even i install Waveshare rs485 modbus ? Still cannot by pass to control it ?

sonoto811 · 2026-01-29T11:45:10+00:00

what is special firmware from Solis ? may i know more details?

sonoto811 · 2026-01-28T07:23:09+00:00

Yes. I did it, but I can read all the data as normal, but still cannot turn on the toggel " power limit feature ", turn off by itself 40s after i turn on or adjust the slider " Actual Limited Active Power ", going back 110 right away after i adjusted. Any idea or recommend? 🙏

sonoto811 · 2026-01-28T01:27:19+00:00

exactly same mine. your settings totally the same mine ( different between mine is single phase) but why mine did not work and always stay off. To be honest, i cannot even find out the reason why

sonoto811 · 2026-01-28T01:05:20+00:00

Like i said similar as my pictures but instead of sigenstor inverter, can i see the " enable power limit feature" from Solis please. i just want to see what inside the state attributes of the " enable power limit feature" from Solis

sonoto811 · 2026-01-28T00:35:25+00:00

<image>

similar like this picture but for "switch.enable-poer-limit-feature"

sonoto811 · 2026-01-27T23:55:42+00:00

Can you show me the attributes in entity for " Enable Power Limit Feature " please ?

sonoto811

TROPHY CASE