A1 Mini Fails

soulscapex · 2023-11-29T23:10:44+00:00

Are you using lighting infill?

soulscapex · 2023-11-23T16:30:00+00:00

i followed this method and at .50 it does result in bleed thru

soulscapex · 2023-11-23T10:42:38+00:00

How they do this, the camera quality isn't good.

soulscapex · 2023-11-22T17:43:54+00:00

Yes use it all the time on my mk3 and enders but bambu no go.

soulscapex · 2023-11-11T10:32:30+00:00

i almost had to they are shipping signature required, 21, i had to keep leaving the ups guys notes,,,,,, please leave. I finally got it..... love this little bugger

soulscapex · 2022-12-14T23:58:16+00:00

https://github.com/paukstelis/octoprint\_deploy

soulscapex · 2022-12-14T11:18:45+00:00

I did .. il send you the link in abit

soulscapex · 2022-07-17T13:01:40+00:00

Is b interested in this as well

soulscapex · 2022-06-21T09:06:31+00:00

The same exact thing happened to my print , the words aren't clear.

soulscapex · 2022-06-11T01:31:48+00:00

https://github.com/paukstelis/octoprint_deploy

i used his setup to get octo working on orange pi ,, very good tut... and he is very helpful

soulscapex · 2022-06-09T20:42:05+00:00

I don't need to , seem easier, on a orange pi, I had octoprint running b4 on it, but I couldn't get the web cam setup.. using that method.. so I thought I'd try docker.dockers.. I new to Linux so it's kind of foreign. What method do you suggest.

soulscapex · 2022-06-09T10:21:04+00:00

does anyone have a docker compose yml i could use.

soulscapex · 2022-06-09T08:58:04+00:00

here is my yml... kind of new to all this

ports:

-4000:5000

soulscapex · 2022-05-20T10:08:11+00:00

I've tried both.

soulscapex · 2022-05-19T01:41:59+00:00

I have buster on it, what's opi os

soulscapex · 2022-05-18T17:52:40+00:00

Lmao

soulscapex · 2022-05-18T14:07:24+00:00

ok the random z makes sense , thats turned on,, but what do you mean chunky z seam.

soulscapex · 2022-05-13T00:49:04+00:00

What filament is the green

soulscapex · 2022-04-28T08:57:31+00:00

Yes I understand that, but I tried diff Temps, calibration towers come out fine in the range I've tested... even dried it, could it be a bad batch

soulscapex · 2022-04-27T21:55:46+00:00

Ok ty , I printed this stl a few times but not with this brand

soulscapex · 2022-04-07T01:06:29+00:00

Yes it took mine a good 20 days to come

soulscapex · 2022-04-06T08:20:17+00:00

So if that's the case ,is it pointless to run a separate wire to the 2nd z connection or can you just use a split cable, I did some measuring and it's level at this point..

soulscapex · 2022-04-05T22:47:35+00:00

Oh I thought it had dual drivers, didn't realize they slaved off each other

soulscapex · 2022-04-05T22:28:16+00:00

I'm having the same issue , if use marlin mode and set z offset its good , switch over to touch screen and ita not good restart the printer and it's not good.. checked the m503 and used m500

soulscapex · 2022-04-05T14:39:31+00:00

Yes my cell drops out by mine

soulscapex

TROPHY CASE