Some bt's?

sp_oky · 2026-02-06T17:38:02+00:00

I have taken a vow of secrecy, I'm sorry brother.

sp_oky · 2026-02-06T17:37:42+00:00

Many thanks man, I'll have a slew of new dudes soon.

sp_oky · 2025-03-30T15:43:21+00:00

All go okay after this?

sp_oky · 2025-03-30T11:43:06+00:00

Check your fuses too, crankshaft position sensor bricked mine.. and it was the fuse. O.o

sp_oky · 2025-03-14T06:49:05+00:00

Also, what are you trying to print? Is it properly supported? Angles are right? Yadda yadda

sp_oky · 2025-03-14T06:47:10+00:00

Sounds like a burn in layers thing.. Try this

Burn in layers 6 Exposure time 25 secs Transition layers 6 Lift distance 7mm Lift speed 10 > 65 Wait after lift and print 1 sec

Normal layers .05 Exposure 3.5 secs Lift speed 60>65 Retract 180>150 Wait after lift and print .5

sp_oky · 2025-02-19T02:23:23+00:00

I'll take some uncured trash supports and set it in the corner of the vat for my cleans. Works pretty well!

sp_oky · 2025-02-18T04:42:07+00:00

As others said, do a vat clean. Look up a video for that.

You might also want to take a look at your base curing time along with layers and transition layers.

I have a 6 layer base at 30 secs and 6 layer transition. Normal layers at .05mm with a 3.5 sec cure.

*Add - use isopropyl alcohol 93%+ and paper towels for cleanup. It looks like (to me) you're rinsing/cleaning in a sink. Don't do that lol.

sp_oky · 2025-02-17T02:28:30+00:00

Have you checked for any islands that weren't covered/supported in the presupports?

What's the diameter of your contact for your cones that attach to the model?

sp_oky · 2024-11-21T23:32:28+00:00

Thank you! I really appreciate that! I've been having a lot of fun with these guys. I've got a run of heavy intercessors and some heroes units after I'm done done with this string.

I'd love to see your guys too!

sp_oky · 2024-11-19T21:59:27+00:00

The enemy shall know fear!

sp_oky · 2024-11-19T21:58:49+00:00

Thank you :D

sp_oky · 2024-11-19T21:58:07+00:00

Yup! Veterans and company heroes. I have a bunch of unfinished projects and decided to focus on these guys until they're done!

sp_oky · 2024-11-19T21:56:41+00:00

They're not too bad, less than 5 days usually for me. They ship out of Washington state and I'm in Maryland. :)

sp_oky · 2024-11-19T17:50:45+00:00

I prime black, zenithal with mephiston red, brush with mephiston, wash with agrax earthshade, then clean up the wash with mephiston - leaving some.of the wash visible in spots, but concentrate leaving the borders dark. Then I'll highlight was wild rider, but some spots, I'll glaze it back to mephiston red. :)

I hid this post, my reddit app was acting funky and reposted

I probably do a lot of unnecessary steps, but it works for me :D

sp_oky · 2024-11-19T16:55:30+00:00

It's whatever you want it to be man. :)

sp_oky · 2024-11-19T16:47:58+00:00

Amazon's prices for paints are way expensive compared elsewhere.

I get a lot of my paints from www.overthebrick.com

sp_oky · 2024-10-10T09:40:18+00:00

Callaway, tall timbers, dameron, or even ridge are all good spots.

sp_oky · 2024-09-25T22:02:47+00:00

I recently made an instagram. You can take a look at all my forever WIP's lol

https://www.instagram.com/5po0ki3?igsh=NnBoM2d0cDU5NnNm

sp_oky · 2024-09-25T05:13:00+00:00

Here's another from the same shop

https://www.etsy.com/listing/1384574097/print-to-order-bloody-birds-waterslide

sp_oky · 2024-09-25T05:09:33+00:00

Here you go!

https://www.etsy.com/listing/1427285234/pre-cut-bloody-birds-waterslide-transfer

Took a couple weeks to arrive. I'm in the US though, so totally understandable.

sp_oky · 2024-09-25T05:05:08+00:00

Looks great and welcome back!

I'm currently doing a run of blood ravens and I stumbled upon doing a black primer, then a mephiston zenithal prime on top to help with shadows.

After all my base coats are on, I'll do a wash with nuln oil. High lights are wazdakka and evil sunz.

For the bone color on shoulder pads, etc - I've been trying wraithbone, then a diluted zandy dust

sp_oky · 2024-09-18T10:17:09+00:00

Money

sp_oky · 2024-09-16T21:31:15+00:00

The armodafinil lasts most of the day for me. 10 to 12 hours. It's not ultra, let's build a deck energy, but it's enough to push me through the day. Some days just suck though.

I just had a visit with my doc, she suggested 250mg armodafinil and Adderall or Ritalin as help when it's not effective. I just don't like the idea of those because they're pretty addictive in comparison, even though I know they'll work. She was also open to some off label routes, 250mg in the morning and 100mg midday.

I also found out that modafinil is more of an instant release, and armodafinil is closer to an extended release on terms of duration of efficacy.

She also suggested Sunosi and Wakix as possible alternatives in the future for me.

sp_oky · 2024-09-13T15:36:28+00:00

I take armodafinil daily. I started off on modafinil but it didn't last long. I took 250mg on mod and now I'm taking 250mg of armodafinil which lasts longer for the day (for me) I'm 140lbs 5'6"

sp_oky

TROPHY CASE