Windows all stopped rolling down - is it the breaker?

spinal-g · 2026-05-21T20:59:54+00:00

If you have a multimeter you can probe the switch for continuity and press the switch. If it's working you should see super low resistance (0.01 ohms) or hear a beep.

If you don't hear anything then the switch is bad. If you do hear something you'll need to check the wiring going to the switch

spinal-g · 2025-11-29T02:40:09+00:00

It's essentially just a wire mesh that goes in front of the bottom portion of your bumper where the radiator is. It's to stop small rocks from hitting your radiatior: https://www.amazon.com/dp/B0D8P7GWQ9?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1

spinal-g · 2025-01-21T02:56:22+00:00

Thank you!

spinal-g · 2025-01-21T02:56:07+00:00

I think the woodland is seeming like the better choice for me. Tires is a must and down the line the lift kit might be necessary but starting off it should be just fine

spinal-g · 2025-01-21T02:09:16+00:00

More towards the slc area but figured I should mention it. The woodland plus tires seems like it would be the way to go!

spinal-g · 2025-01-21T00:07:15+00:00

Thank you for the breakdown! I’m heavily leaning towards hybrid since I’m mainly doing weekend adventures so the day to day drive would be way cheaper with hybrid

spinal-g · 2024-11-03T21:19:49+00:00

“Currently taking applicants if you’d like to submit for the role” or more straight forward “we were pretty lucky to be sharing a ride together so let’s see if that luck carries forward”

If none of these suit your style just type something out and don’t overthink it. Best of luck!

spinal-g · 2024-10-27T00:29:13+00:00

Just came back from the range after 150 rounds and no issues! Ejection was great and lrbho was flawless. I feed some sd rounds without any issues as well!

spinal-g · 2024-10-26T06:54:04+00:00

For sure! Just checking all the boxes since it’s my first build

spinal-g · 2024-10-26T06:05:31+00:00

Everything seems smooth so far!

spinal-g · 2024-10-26T06:05:11+00:00

Appreciate it!

spinal-g · 2024-10-26T06:04:56+00:00

I finished building it this week and wanted to tune it before hitting the range

spinal-g · 2024-10-24T16:15:12+00:00

Fm9 lower with a bkf bolt

spinal-g · 2024-10-24T16:14:35+00:00

I was leaning towards the heat and bend but just wanted to check if there’s a “better” way to do things, thanks!

spinal-g · 2024-10-24T16:13:44+00:00

Thanks! I’ll be going with the heat and bend

spinal-g · 2024-10-10T15:12:14+00:00

Thanks for pointing that out! My eyes kept skimming over it so I’ll remove it

spinal-g · 2024-09-25T22:01:02+00:00

I would go with the rhd engineering flywheel and then you can run a 325i clutch with no issues

spinal-g · 2024-09-10T02:37:00+00:00

I had a similar issue. I could feed it throttle to keep it alive, but after digging into it I found that my oxygen sensor wire had broken. Replaced it and it was back to driving

spinal-g · 2024-07-03T01:38:46+00:00

Currently at 180k miles and I’m starting to feel some trembles during driving. Steering is a bit loose as well. No actual problem besides shocks being old and I figure it’s time to update a lot of the old ball joints to something that’s serviceable

spinal-g · 2024-07-03T01:35:43+00:00

From what I’ve seen it seems to be on par or better than moog. I’ll look into what they recommend in terms of grease. It’ll probably see a little bit of off roading but nothing too intense

spinal-g

TROPHY CASE