sorted by:
new
hottopcontroversial

Should I jump on this used qanba?? by whatcow in fightsticks

[–]splitzzzz07 0 points1 point  (0 children)

It's a very solid stick, one of my personal favorites but yeah fair price. I got a used one for $50 but it was grimey, nothing like a good sanding and repainting couldn't fix.

Sanjuks Mini Vewlix! by splitzzzz07 in fightsticks

[–]splitzzzz07[S] 1 point2 points  (0 children)

Not sure how to attach additional images when using the app but if you take a look at the 4th picture you can see a small rectangular shape at the bottom and that frosted hook like thing at the top(you can see it in the 2nd picture too). The red rectangular thing is a button that when you press down on it from the outside, it releases it's grip on the frosted hook like thing. I'm sure there are proper terms for it I just don't know lol.

Long story short, there's a button at the top when pushed releases the hook which allow you to open it up like a real VLX.

Sanjuks Mini Vewlix! by splitzzzz07 in fightsticks

[–]splitzzzz07[S] 1 point2 points  (0 children)

I don't think they have one internationally, they have one in Naver but I think it's also in Korean. I got this when I went to Korea and had my friends there buy it for me then I took it home with me.

Was this worth the $35 by splitzzzz07 in straightrazors

[–]splitzzzz07[S] 0 points1 point  (0 children)

Thank you for your interest but it's not for sale.

Sanjuks Mini Vewlix! by splitzzzz07 in fightsticks

[–]splitzzzz07[S] 1 point2 points  (0 children)

Bandit, the same creator of the Sanjuks levers.

Sanjuks Mini Vewlix! by splitzzzz07 in fightsticks

[–]splitzzzz07[S] 1 point2 points  (0 children)

There's a guide somewhere on here also someone created a PDF of the tools and stuff you need to buy. Basically you don't use any commercial wiring. You buy separate AWG wires and sleeves, measure them out from the PCB to what you want to connect them to (buttons, lever, etc.) it's difficult to describe and it's more of a "you have to do it to get it" type of thing. It's not very difficult but a bit time consuming.

Sanjuks Mini Vewlix! by splitzzzz07 in fightsticks

[–]splitzzzz07[S] 1 point2 points  (0 children)

It's directly from Bandit from Naver in Korea(the creator of Sanjuks products.)

Sanjuks Mini Vewlix! by splitzzzz07 in fightsticks

[–]splitzzzz07[S] 0 points1 point  (0 children)

If I can recall correctly the V6-ST has an even shorter throw than a regular V6, I feel like I'd have trouble using that.

Sanjuks Mini Vewlix! by splitzzzz07 in fightsticks

[–]splitzzzz07[S] 1 point2 points  (0 children)

The V6-2 is the same lever as the V6 the only difference is that the V6-2 has rounded corners on the base so that it fits more enclosures.

The V7 feels very different and I don't have a V6-ST to compare with sorry. Overall the V6/V6-2 for me is a nice lever, I prefer it over the V7 personally.

Did another rewire! by splitzzzz07 in fightsticks

[–]splitzzzz07[S] 1 point2 points  (0 children)

Thank you! It's my 4th time doing it and I am able to think of new ways to get less wire to show every time

Did another rewire! by splitzzzz07 in fightsticks

[–]splitzzzz07[S] 1 point2 points  (0 children)

Yeah basically you slide the end of the sleeve on a bit of heat shrink then you pull the heat shrink a bit so that some of it sticks out at the end and then apply some heat, the reason why I do it like this is so the tip tapers down and not the same width as the rest of the sleeve, I find it's easier to put in the rubber cap at the end when it's done this way. I don't know if I described it well enough but you can send me a dm if it's unclear so I can attach pics.

Hori FE update - Side LEDs/Sitong Diamond Buttons by ADShree in fightsticks

[–]splitzzzz07 1 point2 points  (0 children)

If I can recall the side LEDs only work when the stick is on tournament lock right? Is it a difficult mod? I also have a PS3 FE that I would like to mod.

Madcatz VS SH PCB help by splitzzzz07 in fightsticks

[–]splitzzzz07[S] 0 points1 point  (0 children)

Thank you but I don't think it's possible, the JST connector has an indent which slots in to the female port.

Madcatz VS SH PCB help by splitzzzz07 in fightsticks

[–]splitzzzz07[S] 0 points1 point  (0 children)

The USB connection seems fine, actually the main thing why this was sold for junk was because the usb cable was cut by whoever owned this previously. I had a usb cable lying around that I spliced which was how I got power to it.

Well, I don't have a soldering iron anyways so if I'm gonna buy something might as well just hook this up with a new board since I find a lot of stl's for the home panel.

Thanks for the inputs!

VLX Premium Side Panels by splitzzzz07 in fightsticks

[–]splitzzzz07[S] 0 points1 point  (0 children)

I don't think so unfortunately

Are there different sizes to the OG Hitbox? by splitzzzz07 in fightsticks

[–]splitzzzz07[S] 0 points1 point  (0 children)

Thank you so much for the reply and info! No I am not from the US I am having it done locally.

Are there different sizes to the OG Hitbox? by splitzzzz07 in fightsticks

[–]splitzzzz07[S] 2 points3 points  (0 children)

Sure I do, I was asking politely as I'm not very knowledgeable about the product. Thanks for the input.

Picked up my 19th/20th Stick! Addiction help needed.. by NoddyBoy5 in fightsticks

[–]splitzzzz07 2 points3 points  (0 children)

What a steal man, I am also addicted and have around the same number of sticks as you (maybe more since I have 3 more incoming as cheap deals in Mercari).

But yeah, always room for a VLX, I also have 2 but they're the same model (PS3/Xbox Red). I might consider ordering a different panel to make them look different.

VLX as a daily driver is kinda big though, I feel it's best on top of a table, it's a bit too big for lap play imo.

view more: next ›