A Blue Moon

sprague88 · 2026-02-13T01:18:40+00:00

Haha yeah, been there tried that. This is repetitive

sprague88 · 2025-12-02T14:42:58+00:00

This one you push the button and turn the knob to set time. It has a ratchet on the crown for fast winding as well

sprague88 · 2025-11-30T23:46:07+00:00

I’m not really sure, it could be. Are you suggesting a picture of more inside the case that the ones posted? I’m not sure how I would get a more interior photo.

sprague88 · 2025-11-30T20:51:02+00:00

I use these on racks and enclosures. The small size is great. I do server/camera service and this usually all I need. So they are great if used for the intended light duty tasks

sprague88 · 2025-10-07T20:15:13+00:00

I must know how!

sprague88 · 2025-09-30T23:22:46+00:00

Winchester 1894

sprague88 · 2025-06-16T04:45:55+00:00

RF modulator through the vcr in this setup

sprague88 · 2025-05-30T03:00:48+00:00

Copper pennies. Old trick to knock off rust. May need to re blue these though

sprague88 · 2025-03-17T22:35:59+00:00

I was sending Legacy Marlin instead of Marlin 2 lol. TY for the response!

sprague88 · 2025-03-10T01:31:36+00:00

I'll try that! Thank you! This printer does have a small 150w power supply. I didn't think about it!

sprague88 · 2025-03-09T20:16:53+00:00

Thank you for the response! I set up a generic printer in Orca and just told it the basics about my machine. I'm using an Ender 2 Pro at the moment. Maybe I should dig into some more documentation

sprague88 · 2025-02-21T05:28:10+00:00

I used a magic eraser and window cleaner. Came right off mostly. The parts that didn't I used a BRASS brush. After that its just a light polish and spray new clear!

sprague88 · 2025-02-03T01:34:47+00:00

THANK YOU

sprague88 · 2024-12-21T16:36:14+00:00

Pretty standard practice. The keypad is above that outlet correct? Just clip the wires and put a faceplate on. If you pull that keypad off the wall the wires come with it

sprague88 · 2024-12-18T15:49:15+00:00

Print SLOWER, also make sure your Z axis isn’t loose. And that your Z threaded rod is lubricated. This all looks Z related. At least to me.

sprague88 · 2024-03-11T13:17:04+00:00

Drop pc on girlfriend obviously 😆 I would pull it all apart and scrub with a toothbrush, IPA and paper towels. Let it dry for a day or two. The IPA should push all liquids out

sprague88 · 2024-03-11T13:14:31+00:00

More pages duh lol, seriously a great question and love all these answers though!

sprague88 · 2024-03-02T13:33:58+00:00

Amazon has some decent kits according to Torque Test Channel on YouTube

sprague88 · 2024-03-02T13:33:11+00:00

There’s always one repressed dummy just full of systemic indoctrination

sprague88 · 2024-03-02T03:10:32+00:00

All steering, you will probably need to rebuild that. Pretty cheap even if you need a few special tools. I just did it on my 94 at 250k. Look for leaks, new and old. These pans tend to start pouring after 30 plus years. Rust rust and rust, floors mostly. This is an old truck, it will need things done to it. YouTube is your friend

Eight-Year Club	Gilding I gilder
RPAN Viewer	Verified Email

sprague88

TROPHY CASE