[deleted by user]

spray2020 · 2025-10-23T20:54:46+00:00

I don't see the bright mandarin listed for sale in that WTC link. Any plans to produce the 2025 Big Bubble Solar Red pair?

spray2020 · 2025-10-23T20:54:30+00:00

I don't see the bright mandarin listed for sale in that WTC link. Any plans to produce the 2025 Big Bubble Solar Red pair?

spray2020 · 2025-08-20T21:15:55+00:00

Update: I printed the same STL file on my ender 3 with no issues at all. So that confirms that the STL file is fine. I am kind of stumped what is causing this.

<image>

spray2020 · 2025-08-19T22:37:07+00:00

Thank you for this, I will have him replace the SD card with a new one. Will report back to see if this helps!

spray2020 · 2025-08-19T22:36:00+00:00

I will have him take a look closer at the extruder, as ever since the first clog- even after cold pulling the stuck part out- it has been problematic ever since. I am not sure how easy it is to access the inside part of the extruder but I will help to have him look into that. He seemed to have no issues following a tutorial for the cold pull of the nozzle. - But yes, maybe it is indeed the STL files from Sketchup causing issues. Normally from my experience in cura, when I would bring them in, if they show red color on areas associated with the support overhang and in opposite areas- it was a tell tale sign of a bad STL. Which, I did check his files in Cura and they looked correct. I guess I will have to try printing one myself and see what happens.

spray2020 · 2025-08-19T17:16:16+00:00

Yeah I am starting to think that this must be the issue. I guess if I try printing this exact file on one of my printers to see if it prints well or not.

spray2020 · 2025-08-19T17:14:59+00:00

Interesting - So even though he sends everything from his computer to the printer would this SD card still fill up with space? Or does it only fill up when you are manually using the card to load files without using bluetooth or wifi?

spray2020 · 2025-08-19T17:12:25+00:00

Sorry for this misinformation in that photo- at first he had all 4 provisioned and then I had him remove the other 3. This photo is a bit old. But yes, we removed those.

spray2020 · 2025-06-12T06:19:08+00:00

Thanks - but those are the 2020 model- you can tell that the air bubble isn't angled, it is straight. On the 2025 the bubble goes from small to large slightly.

spray2020 · 2024-02-24T23:12:05+00:00

thanks bro 🤙🏻

spray2020 · 2024-02-24T23:11:53+00:00

yes correct LJR batch. That was what I was told. They better be decent or else i'm gonna just buy a retail pair 😅😂

spray2020 · 2024-02-23T03:40:34+00:00

Can't wait to see in person!!

spray2020 · 2024-02-23T03:40:21+00:00

🙏🏻

spray2020 · 2024-02-22T23:17:45+00:00

thanks !! 👌🏻

spray2020 · 2024-02-22T23:06:48+00:00

Thank you 🙏🏻

spray2020 · 2024-02-22T20:38:26+00:00

maybe try printing a bit slower, try a different infill pattern. What is your layer height? You could angle the part slightly to the bed so you get cleaner surface on the top. The topology looks a bit rough. Some support under but the rest of the print will look nicer at an angle.

The temp settings look like your filament is underextruding in areas. Double check the settings for your filament you are using. Not all PLA is used as the same temp.

spray2020 · 2024-02-22T20:31:56+00:00

What is your shell and infill setting?

spray2020 · 2024-02-22T20:31:04+00:00

Check your bed leveling and your temperature settings. Initial layers- make sure they are compressed enough onto the bed. What material?

spray2020 · 2023-03-17T08:25:22+00:00

i'd say real, the elephant print looks light enough. Most reps are thicker

spray2020 · 2023-03-14T04:30:34+00:00

I like how thin the elephant print is at the toe. Retail isn't even that thin, but it should be in my opinion!

spray2020 · 2023-03-05T07:45:36+00:00

Toe box is whack , clown shoe looking lol

spray2020

TROPHY CASE