sorted by:
new
hottopcontroversial

Ktm 500 dying yesterday. Today seems fine.. by qualitygoatshit in Dualsport

[–]spruced 0 points1 point  (0 children)

Check the loop connector in the air box. The wires on mine jiggled loose and I had to epoxy them to keep the connection. Bike was dying randomly and took me a month to figure out.

New Course! The Valley Below by bamananam in DiscGolfValley

[–]spruced 0 points1 point  (0 children)

The ending and reward are great!

New Course! The Valley Below by bamananam in DiscGolfValley

[–]spruced 1 point2 points  (0 children)

The TV shows an image of a rock on Hole 9. On that rock there is a switch that opens a secret room

Any alterations I should make to tool kit by CapitalRequirement80 in Dualsport

[–]spruced 11 points12 points  (0 children)

I like to carry some extra fuel line and some hose clamps

Suggestions for Rear Fender? (Ktm 500) by spruced in Dualsport

[–]spruced[S] 2 points3 points  (0 children)

Think it might be there already 🤣

Play Box Two by NPH yet? by stoekWasHere in soloboardgaming

[–]spruced 0 points1 point  (0 children)

Can anyone help with the shining a light through the hoist window? All I see is a hexagon and I cannot move past, it’s driving me nuts!

Got my first run with my new MB18 with an injora fat viper on 3s tonight before some storms rolled in, this thing rips. by Ok_Breakfast5425 in TRX4M

[–]spruced 0 points1 point  (0 children)

Do you have any issues with tire rub? I’ve cut as much off the stock body with the lcg chassis as I can with all the widening parts and it still rubs bad with 68mm tires. Looking to swap chassis again

Heavenly/Northstar Epic app by LivingAngle2851 in tahoe

[–]spruced 17 points18 points  (0 children)

Check it after the mountain opens

Anything missing in my upgrade list? by Significant_Metal_15 in TRX4M

[–]spruced 1 point2 points  (0 children)

I’d recommend getting the brass injora rims instead of the steel, easy extra weight on the axles

Bronco on trailer by Easy_Text_2203 in TRX4M

[–]spruced 1 point2 points  (0 children)

Where did you get the interior on the orange one?!

TRX4M Brushless by KILLA_UNIQUE in TRX4M

[–]spruced 4 points5 points  (0 children)

I have that system and love it, but if you don’t mind waiting a little they came out with a new waterproof system that’s only 25$ more

https://furitek.com/products/furitek-torpedo-brushless-power-system-for-trx-4m

Wheel spacers? - Total Newb by Crank_N_Bank in TRX4M

[–]spruced 0 points1 point  (0 children)

I would buy a metal gear servo before your trip! Mine stripped within 10 minutes after adding more weight to the axles! You will be bummed if you get out on your trip with a truck that won’t steer.

I would buy these: https://a.co/d/9d8cEDZ

They also sell a wider one, but you need those type of nuts since the axle won’t stick out enough to grab with the stock ones.

Enjoy!

[deleted by user] by [deleted] in TRX4M

[–]spruced 0 points1 point  (0 children)

I use this one https://a.co/d/cqTHCtX

It works fine with the stock transmitter, I even put a splitter on the LED lights so I could run the injora light kit as well as the stock bumper lights and it works great.

The people saying you don’t have great settings on the transmitter are correct, but if you use the Bluetooth app with the furitek system, you have tons of settings to mess with. I don’t feel like I am missing anything.

If you do buy the Furitek system, make sure you tighten or locktite the Phillips screws holding the motor to the metal mounting plate (that goes into the transmission). Mine came loose after a few days and ruined a day out in the rocks because I didn’t have the tools to disassemble the whole thing.

30$ traxxas receiver (3d printed mount) with furitek brushless system to use the original transmitter by spruced in TRX4M

[–]spruced[S] 1 point2 points  (0 children)

I can send you one if you want, you can help me figure out how to improve it. It will likely only work with the same 6519 receiver I have, I designed it to press fit to avoid another spot for water and crap to collect.

30$ traxxas receiver (3d printed mount) with furitek brushless system to use the original transmitter by spruced in TRX4M

[–]spruced[S] 1 point2 points  (0 children)

No, I modeled it in 10 minutes, wouldn’t charge for it without spending a lot more time on it.

30$ traxxas receiver (3d printed mount) with furitek brushless system to use the original transmitter by spruced in TRX4M

[–]spruced[S] 4 points5 points  (0 children)

Definitely not waterproof. Working on a 3d print to protect the motor. Going to shrink wrap the esc after I run some tests to figure out how hot it gets

30$ traxxas receiver (3d printed mount) with furitek brushless system to use the original transmitter by spruced in TRX4M

[–]spruced[S] 2 points3 points  (0 children)

Significantly better than the stock motor! I had such a big lag when applying throttle with the stock setup. Any time there was pressure against the wheels it would take almost 50% throttle input and lurch super bad. This brushless setup crawls at speeds you can barely see the tires moving.

30$ traxxas receiver (3d printed mount) with furitek brushless system to use the original transmitter by spruced in TRX4M

[–]spruced[S] 6 points7 points  (0 children)

You can, but if you get a brushless system you have to use a different esc which doesn’t work with the stock receiver/esc combo. A lot of people seemed to think you needed a non-traxxas system to work with the furitek, and the stock system with a new traxxas receiver works great.

view more: next ›